Community : All Content - All Communities

Where do I go to download specific artists' sounds to put onto my POD version 2.0?

support@line6.com — Sun, 22 Nov 2009 01:30:41 GMT

My friend sold me his guitar a few months ago and he gave me his POD version 2.0 with it. He told me a long time ago, he downloaded sounds from bands like The Smashing Pumpkins and Nirvana from online and was able to transfer and save those sounds into his POD, but this was not the POD he sold me. He did this with his other POD, which might be an more recent version than the one he gave me. I really want to be able to play specific sounds from my favorite bands through my POD, but my question is where online would I go to get these sounds and is it free? My guess is that my POD version 2.0 is too old to even support this function and that I would need a newer version of the POD and a program like POD Farm? I really want to know the answer to this. I would appreciate any help.

Thanks,

POD user: Robert

2010 Free Update ! Models and More for M13 - YES O NO ?

support@line6.com — Sun, 22 Nov 2009 01:29:35 GMT

Bring on more models I say and keep the update free.

Thanks Line6!

Teer

Linux support

support@line6.com — Sun, 22 Nov 2009 01:24:57 GMT

Hey, brother! Just take your time to look at:

http://ardour.org/

http://jackaudio.org/

http://audacity.sourceforge.net/download/

http://www.hydrogen-music.org/

http://jamin.sourceforge.net/en/about.html

You can record an entire band with these tools. With professional results. And after all, you can contribute donating money and yet save some cash to buy a better hardware... \o/

Display has solid black bar on top line and shows Tone2 name below it.

support@line6.com — Sun, 22 Nov 2009 01:23:01 GMT

If you are confident that you can duplicate the problem on your unit within like 5 or 10 minutes then I would consider calling Line6 to see about sending it directly to them to check out. If they can duplicate the problem by following your instructions and they can’t fix it, I bet they would send you another unit. Whenever the X3 series was first released and there were so many problems with it, it wasn’t uncommon for Line6 to have people send their units back so they could see the problem first hand, and they would send a brand new unit to replace it.

Check out our recording

support@line6.com — Sun, 22 Nov 2009 01:17:45 GMT

There is some low distorted rumble or garbled up track in there. Long *** song. I kept waiting for something to happen. At 2 minutes the vox coming sure wasnt' it. Neither was the guitar attempting a solo at 6 minute mark. Lots of interesting other sound going on in there though, but the song never seemed to take off. I didn't understand one word of the vox and there wasn't really any space in the mix for them and they were burried most of the time. I couldn't tell if it was a girl or whiny guy singing. Maybe I just don't get the style of music. With exception of the vox and the rumbling sound the recording itself sounded good. I would like to hear it with the vox where they were intended to be in the timeline rather that this offset.

This was recorded in an apartment and mixed in your home. Why is this not a home recording?

Charlie

Spider Valve 112 Knobs

support@line6.com — Sun, 22 Nov 2009 01:16:08 GMT

thanks for the info, i do think its pretty ridiculous you cant fix the problem yourself though. i guess i will have to find someone who can fix this..

2x12 4x12 missing on pod xt pro

support@line6.com — Sun, 22 Nov 2009 01:07:27 GMT

when i press the i/o dig i get to the page what are you connecting to and i cannot get the studio direct to change to 2x12 ,4x12 also the series fx loop and spdif digout are missing from the same page.

the firmware is version 3

do i have to set this to turn the mics and room components of air ?

and if i wanted to go back to an earlier wesion of the firmware how would i do this.

pod farm and reaper

support@line6.com — Sun, 22 Nov 2009 01:06:28 GMT

reaper recognizes podfarm in my vst and when I turn on my fx (green) and add podfarm I get complete silence and cannot adjust sound fx. I add another fx and uncheck podfarm and I can work my fx and adjust, then I turn on podfarm and get silence again, no possibility to adjust. What's up with this

UX1 Stalling Propellerhead Record on Launch

support@line6.com — Sun, 22 Nov 2009 00:46:07 GMT

Hi Guys,

I’m pretty unsatisfied here and completely under awed with with my UX1 so far...

My intention was to initially use the UX1 as a dongle to expand the Line 6 amps in Record but I have several issues. I shall sent these out.

1) I now have the UX1 up and running, but if it is plugged in Record stalls when it gets to the launch splash screen. It then proceeds to crash my Mac entirely. If I unplug the UX1 Record launches fine.

2) There were not any installation instructions in the package I received, although I have so far pretty much worked it out.

3) There is now a hum on my right hand M-Audio BX5a Monitor, this is new and I am worried it may be due to...

4) When the UX1 crashed my Mac the first time I had my Lexicon Alpha plugged in and monitors on in anticipation of the great sounds I was going to get with my new UX1 and Record. However what I did get was a very loud crack which seems to have blown the inner workings of the Alpha, and possibly damaged the Monitors!!

So presently I cannot use the UX1 to listen to Record and my existing soundcard is blown.

Pod Farm issue

support@line6.com — Sun, 22 Nov 2009 00:39:59 GMT

Hello,

I downloaded Pod Farm and it is preventing me from using the Model Packs that I have purchased and that are available in my POD X3.

I cannot remove my iLok as I will no longer be able to use much of my software and so I can now no longer use my POD X3.

Is there a way to fix this?

Thanks