Community : All Content - Spider

spider2 212 with no sound

support@line6.com — Sat, 21 Nov 2009 20:43:58 GMT

Just picked up a used spider 2 212, when buying tried it and sounded great functioned perfectly, got it home, and it powers up, lights flash etc... but no sound. Ive tried the a channel reset thing, no help. trying the power on while holding the tap button gives it sound, but just one sound no adjustments, all the knobs all make the channel select lights move after doing this. ive exhausted the net huntin for the correct procedure but i guess im missin it, any help would be appreciated....btw the way ive tried it in several power outlets as well with no help.

FBV short board compatibility

support@line6.com — Sat, 21 Nov 2009 20:36:25 GMT

Just like a FYI, you need the Footcontrollers MkII series to update the Spider IV, you cannot do it with the MkI

Spider IV backup - question or suggestion

support@line6.com — Sat, 21 Nov 2009 16:50:10 GMT

Thanks Rowbi and Hugo.

I wasn't sure if perhaps there was a backup feature or some computer access (something like I believe the Flextone supported).

I know I could write down my settings, but that'd be a pain especially with the deep editing (which is excellent) and that's the sort of busiwork that computers are supposed to do, right?

Plus, it'd be slick if there were a GUI to work on the settings (similar to PODFarm).

I'll make the suggesion on the link Rowbi provided.

Thanks again.

spider IV 15 amp

support@line6.com — Fri, 20 Nov 2009 21:34:48 GMT

Hello,

It's been a couple of days since we've heard from you. We're going to assume your question has been answered and close this thread. If you still have questions please feel free to open a new question with us and we will answer your questions accordingly. Thanks!

FBV shortboard malfunction

support@line6.com — Fri, 20 Nov 2009 19:25:07 GMT

THANX TO MIMUNGR FOR COMMING UP WITH PLAUSIBLE EXPLINATION. i RETURNED IT TO G.C. AND OF COURSE THEY'RE OUT OF STOCK. SHOULD HAVE A REPLACEMENT IN A FEW DAYS

CHEERS!

Switching Channels

support@line6.com — Fri, 20 Nov 2009 04:40:26 GMT

I just upgraded my spider III HD 150 for the Spider IV HD150 and I'm setting it up for this weeks gig. When switching between channels with the foot switch there is a half second sound cut out. I don't recall this being an issue with the spider III. Is this expected behavior?

Spider III 15W - transistor

support@line6.com — Thu, 19 Nov 2009 17:49:33 GMT

Hello,

Can I add a cabinet and connect it to my spider 4.

support@line6.com — Thu, 19 Nov 2009 17:49:07 GMT

Hello,

Chorus Flange problem on my Line 6 Spider III amp

support@line6.com — Wed, 18 Nov 2009 18:02:38 GMT

Wrote Replacement RMA 12846.

Spider III 120

support@line6.com — Wed, 18 Nov 2009 16:53:47 GMT

Hello,

Line6Miller