Community : All Content - Stompbox Modelers / ToneCore

DL 4 bug!

support@line6.com — Sun, 22 Nov 2009 05:43:16 GMT

BUMP

Increased Verbzilla noise with trails switch enabled?

support@line6.com — Sat, 21 Nov 2009 00:57:13 GMT

Hello,

it sounds like a couple things may be happening here:

1) be sure that all the pedals in your audio chain are powered by the same power strip, and change all your cabling. Try moving the pedals and power cables around to see if this changes your noise situation.

2) Check the following document for ore trouble shooting:

Troubleshooting Line 6 Modeling (four-button stomp) and Tonecore pedals

http://line6.com/community/docs/DOC-4490

ToneCore Pedals FAQ

http://line6.com/community/docs/DOC-4166

3) Try a different Verbzilla to see if the behavior can be duplicated.

Please let us know if you need further assistance, or close out the ticket as “answered” if your situation has been resolved.

Are 147 Leslie sounds in ToneCore Roto-Machine same as 147 in POD XT LIVE?

support@line6.com — Fri, 20 Nov 2009 23:02:20 GMT

Currently Being Moderated

Oct 22, 2009 4:00 PM

I have both of these units. My question is this:

Is the 147 model/patch in the POD XT LIVE the same as the 147 model/patch that is my Roto-Machine? If so, I really don't need both. I know this sounds academic, but I'd really like to hear the answer from someone with definitive knowledge. It is clear that the Roto-Machine has more controls and switches, such as the Blend and Drive, but it would seem that I could manage the speed with an expression pedal. Anyway, does someone know the facts?

Power supply confusion 2

support@line6.com — Fri, 20 Nov 2009 14:46:30 GMT

Hi,

I have the same problem. Can not power up my DL-4 in combi with a Flatliner PRO. How have you solved this now?

Line6 obviously does not want us to use a Flatliner - but hey it's a free world aint it?

David (Netherlands)

DL4 powers up at home, but not at clubs...

support@line6.com — Thu, 19 Nov 2009 23:39:32 GMT

Hello,

Are you sure you were plugged into the left mono input? If not, the pedal will not power up. See if this makes a difference for you. Please let us know if you need further assistance, or close out the ticket as “answered” if your situation has been resolved.

DL4 CAN'T RECORD

support@line6.com — Thu, 19 Nov 2009 18:28:56 GMT

Hi,

It's been more than 48 hours since we've heard from you. We will assume that your question has been answered and close out your thread. If you still have questions please feel free to open a new thread and we can continue accordingly. Thank you.

Please be sure to award Helpful and/or Correct points to community members who respond with helpful or correct answers. Then, close out the ticket as "answered" if your question has been resolved.

Regards,

L6Perry

using verbzilla in stereo mod

support@line6.com — Wed, 18 Nov 2009 04:07:51 GMT

thank you very much for the test, it's great, i can by one and use it like a reverb and a mixer for my pedals set up.

Suddenly dead dm4

support@line6.com — Tue, 17 Nov 2009 00:47:52 GMT

Sounds like you will need to take it to an authorized service center. They provide their own bench rates, so you will need to contact the nearest one to you for that information:

http://line6.com/service_centers/

Regards,

Line6Hugo

DL4 looper problem

support@line6.com — Mon, 16 Nov 2009 18:27:22 GMT

I just bought a DL4 cheap off craigslist and the looper does not work, is there a quick fix or am I out of luck?

DL4 loops gradually fading

support@line6.com — Mon, 16 Nov 2009 18:10:23 GMT

Hello,

It's been a few days since we've heard from you. We're going to assume your question has been answered and close this thread. If you still have questions please feel free to re-open this thread or create a new question with us and we will answer your questions accordingly. Thanks!

Regards,

Line6Hugo