Community : All Content - POD Farm / POD Studio / TonePort

Studio UX2 and Pod Farm - Freezes my computer

support@line6.com — Sun, 22 Nov 2009 07:32:25 GMT

I was trying to install my new Studio UX2 and Pod Farm.

I downloaded the latest Pod Farm for Snow Leopard and it keeps coming up with an error message:

The System extension "/System/Library/Extensions/Line6Audio.kext" was installed improperly and cannot be used. Please try reinstalling it or contact the product's vendor for an update.

What does it mean? I downloaded the latest driver as well from the "Downloads" and it came up with the same message.

Also, as soon as I plug in the Studio UX2, it freezes my system straight and I have to Force Shut Down.

Can anyone tell me why it happens?

Thank you

Gearbox plug-in not working in QAM Promise

support@line6.com — Sun, 22 Nov 2009 05:25:54 GMT

Howdy. I'm running a Guitar Port, Line Monkey 1.31, Gearbox 3.7 and QAM Promise 4.60. When I activate an auxilary channel in Promise and select the any of the VST Gearbox plug-ins (Mono, Mono Stereo, Stereo), and then go into the plug-in UI, I can see the Gearbox UI as I'd expect, and can use it just as if I was running Gearbox directly through my Guitar Port. However, for whatever reason, the plugin itself is not actually working - when I select any tone, or tweak with the effects and settings of a tone, it has no change whatsoever in the tone that Promise plays back (which is the tone and effects that I used to originally record the guitar signal).

The other plug-ins seem to work just fine in Promise. The one thing I'm wondering about is the fact that the Gearbox plug-in UI does have a message in the bottom right half that says:

READY TO ACTIVATE:

Line 6 Monkey will run and activate for you. Want to purchase? Click Purchase button in Line 6 Monkey.

Do I need to purchase Gearbox separately as a plug-in?

Thanks.

Where do I go to download specific artists' sounds to put onto my POD version 2.0?

support@line6.com — Sun, 22 Nov 2009 04:44:01 GMT

where online would I go to get these sounds and is it free?

Yes, it's free: http://line6.com/customtone/

Pod farm platinum

support@line6.com — Sun, 22 Nov 2009 04:42:17 GMT

Are there any?

Latest version is 1.11. You can find it on the downloads section of this site.

Do i need to register this at line 6?

ux8 usb firmware unknown

support@line6.com — Sun, 22 Nov 2009 03:39:27 GMT

hi... i have already change my os into windows7 ultimate, and i think its now working well it already detects my ux8 for good

but another problem im encountering....when im playing my guitar and recording it to my reaper 3.13 it works well from the start

but, suddenly the sounds stops at about just a second then it comes back again. i dont know what to call to that term

but its not running smoothly.im using neutrik cables to my guitar and to my monitors. Any problems with my ux8?

this time, i never encountered it with my previous windows vista only in windows 7.

Blue screen with POD Studio UX1

support@line6.com — Sun, 22 Nov 2009 02:49:02 GMT

This may help both of us..can't believe I didn't find it sooner.

http:/line6.com/community/docs/DOC-1627

I feel retarded now for saying they need to get the drivers out asap, but time will tell if this solves the problem

pod farm and reaper

support@line6.com — Sun, 22 Nov 2009 01:06:28 GMT

reaper recognizes podfarm in my vst and when I turn on my fx (green) and add podfarm I get complete silence and cannot adjust sound fx. I add another fx and uncheck podfarm and I can work my fx and adjust, then I turn on podfarm and get silence again, no possibility to adjust. What's up with this

UX1 Stalling Propellerhead Record on Launch

support@line6.com — Sun, 22 Nov 2009 00:46:07 GMT

Hi Guys,

I’m pretty unsatisfied here and completely under awed with with my UX1 so far...

My intention was to initially use the UX1 as a dongle to expand the Line 6 amps in Record but I have several issues. I shall sent these out.

1) I now have the UX1 up and running, but if it is plugged in Record stalls when it gets to the launch splash screen. It then proceeds to crash my Mac entirely. If I unplug the UX1 Record launches fine.

2) There were not any installation instructions in the package I received, although I have so far pretty much worked it out.

3) There is now a hum on my right hand M-Audio BX5a Monitor, this is new and I am worried it may be due to...

4) When the UX1 crashed my Mac the first time I had my Lexicon Alpha plugged in and monitors on in anticipation of the great sounds I was going to get with my new UX1 and Record. However what I did get was a very loud crack which seems to have blown the inner workings of the Alpha, and possibly damaged the Monitors!!

So presently I cannot use the UX1 to listen to Record and my existing soundcard is blown.

Pod Farm issue

support@line6.com — Sun, 22 Nov 2009 00:39:59 GMT

Hello,

I downloaded Pod Farm and it is preventing me from using the Model Packs that I have purchased and that are available in my POD X3.

I cannot remove my iLok as I will no longer be able to use much of my software and so I can now no longer use my POD X3.

Is there a way to fix this?

Thanks

PROBLEM RECORDING FROM POD UX2 TO COMPUTER

support@line6.com — Sat, 21 Nov 2009 23:42:24 GMT

Hi,

From my personal experience, I have used Cubase, versions LE and SX3. To get my UX2 to work with those pieces of software I had to set the ASIO driver to "ASIO UX2", I did this in the device setup section of the Preferences/Options menu. At first the UX2 refused to appear in the list of ASIO drivers, but once I connected my UX2 and configured it using the "ASIO multimedia Setup", I found the UX2 ASIO in the list of available drivers. Then by selecting that from the list and applying that choice, I was able to record.

Whether that helps at all or not, its what I personally had to do. It may differ depending on what software you are using, but it could be very possible the Ideas are the same.

Cheers, Marty.