Community : All Content - BackTrack

Backtrack Flashes Blue - but won't capture.

support@line6.com — Fri, 20 Nov 2009 23:06:13 GMT

Hello,

did you delete ALL the files on the Backtrack? If so, there may be an internal error. Try a factory reset by manually pressing a small object (like a paper clip) into the small hole on the side of the Backtrack. The hole is located on the opposite side of all the UI controls (Backtrack) or on the side opposite the microphone (Backtrack + Mic). Hold the button down for three seconds and then remove the paperclip. The LED on the device will glow white, blink a few times, and then begin blinking blue. You have now successfully reset your Backtrack.

Please let us know if you need further assistance, or close out the ticket as “answered” if your situation has been resolved.

Backtrack problem

support@line6.com — Fri, 20 Nov 2009 16:48:01 GMT

Hello,

It's been a couple of days since we've heard from you. We're going to assume your question has been answered and close this thread. If you still have questions please feel free to open a new question with us and we will answer your questions accordingly. Thanks!

Line6Miller

Problem with Media player/BackTrack

support@line6.com — Thu, 19 Nov 2009 19:15:55 GMT

deadwood,

The files from the backtrack are just .wav files that media player should be compatible with. You should not be able to play the files directly from the hardware through media player though. You would need to remove the files from the backtrack onto a location on your computer. Then, in media player, select the .wav files to be played.

If the problem persists, try playing the audio .wav files in another program or computer.

Please let me know if this helps you.

Regards,

Line6Hugo

Can not down load music files to CPU (marked or unmarked) ?

support@line6.com — Tue, 17 Nov 2009 00:24:06 GMT

Hello,

Please let us know if you need further assistance by opening a new thread.

Problem w/Backtrack

support@line6.com — Fri, 13 Nov 2009 16:32:53 GMT

OK. Glad we were able to help.

Line6Miller

backtrack + mic playback

support@line6.com — Wed, 11 Nov 2009 17:02:18 GMT

Hello,

Line6Miller

Backtrack for Harmonica player - will it work?

support@line6.com — Wed, 11 Nov 2009 01:28:04 GMT

I expect so - the backtrack will record any signal it receives at the 1/4" input jack.I presume you're using some effects on the amp (other than simply volume) to affect tone? If not, you might be able to go directly from your akai to the BackTrack.

If using the amp you may have to fiddle with levels because the amp out is likely line level and the backtrack input is likely instrument level. If your amp has an instrument level output it might work better. Also you will need an adapter from your amp out to feed the BackTrack 1/4" input.

Play along with music files?

support@line6.com — Sat, 07 Nov 2009 20:21:42 GMT

Thanks a lot!!

back track with no distortion?

support@line6.com — Thu, 05 Nov 2009 17:18:59 GMT

Hello,

Line6Miller

no sound in cubase or reason

support@line6.com — Tue, 03 Nov 2009 22:40:02 GMT

Hello,

You need to set the KB37 to be your main input/output device in Cubase. you can do this via the Device Setup option in Cubase.

Set Cubase to use the KB37 ASIO driver.

Does this answer your question?

Line6Miller