Community : Popular Threads - Support

Just Cracked My SV HD100 Open (Job Done Have Pics)

support@line6.com — Wed, 02 Sep 2009 14:10:48 GMT

I'm installing mini switches on the front of the amp to access the 4 Push modes for the SVpre. While I have it open, I realized that I have a EH 12AX7 tube sitting around. The same one that came with the SVpre, I'm replacing the V1 preamp tube with it. Also I'm going to replace the LEDs. I'd love to make the faceplace glow purple which is my favorite color, but I think red would look better.

Why do people down L6 untill they find out how good they realy are

support@line6.com — Sun, 15 Nov 2009 14:29:57 GMT

I play in a Punk/Hardcore band and have played through L6 gear for over 9 years. I bought a L6 spider when they first came out and no one even knew who they were, but everyone was amazed at the sound of this 75 watt 1x12 "monster of tone" and I was in a jam band, then L6 started getting bigger(more people found out what they were missing for the $). The next prodject I started was heavy and I needed a half stack so I bought the spider2 hd150 and a Laney cab from my friend, still before we played everyone wanted to know how the L6 was and they were loving my amp after they heard it, but also saying how hard they found it to get that head to sound good in the store. It just takes some tweaking like any amp.Then in early 2008 I bought the svhd100 and I was amazed( I even bought the head with out even playing through one)and dont get me wrong the L6 is a modeling amp, but it moddels the best amps in the buisness, not exactly but most people will not notice much of a diffrence. now I have recently bought a Bogner Uberschall ( search for the perfect tone) and it is an amazing amp, but my SV HD100 is still a great amp. Basicly what I'm trying to say is L6 is great gear, and not everyone can afford $1600+ for a tube head. And the people who can great, but dont knock theL6 users for tryning to get the tones that only a hand full of people can even purchase. so if you use L6 dont be ashamed be proud that you can get the tones that you need with out breaking the bank. It could be worse, you could be playing through a crate or some other pos!!!

PS next time someone says L6 sucks look at what they are using and listen to there sound, you'll be suprised how good L6 is. listen to the tracks on my bands page and tell me L6 is no good

www.myspace.com/teabagginsacmasters That is a SV HD100 through a Marshall 1960A

Locking tuners for Variax 700 electric?

support@line6.com — Tue, 17 Nov 2009 22:19:27 GMT

Hi everybody!

I'm very happy with my new Variax 700. Great guitar, beautifully crafted, great set up, right out of the box!

The Gotoh tuners are ok really, but however I do have little tuning problems when using the tremolo a bit more violent.

I wondered if it would make a difference to replace the stock tuners with locking tuners from, for instance, Schaller.

And what would be the best fitting model/brand, in regards to the screwholes and such.

Any advice would be greatly appreciated!

Rohaya

Los Usuarios Hablamos de POD X3 Series en Español

support@line6.com — Thu, 12 Mar 2009 17:29:06 GMT

Hola Compañeros, estamos estrenando plataforma, asi que vuelvo a crear el espacio para seguir presentes..

¿ERES NUEVO USUARIO de POD X3 Series?

BIENVENIDO AL FORO

Hace un año, inicié este Thread con el fin de compartir experiencias con los compañeros de habla Hispana..

..hoy de nueva cuenta se abre este espacio.. Sin embargo con motivo de la reciente actualización de la plataforma de Line 6 Forums

quiero aprovechar para establecer algunos lineamientos que considero importantes para optimizar el buen funcionamiento tanto de los Threads como del Foro.

Esta reciente mejora como lo ha dicho ya Line 6 Miller no busca tan solo refrescar la imagen y dar a los usuarios nuevas opciones,

sino también la de re-organizar toda la información de: documentos, preguntas y respuestas, tópicos y demás..

Por lo que veo necesario el establecer algunos lineamientos y reglas dentro del Thread para impedir que volvamos a caer en el desorden..

..ya que en el pasado se contaba con un mega-post que contenia información tan variada como extensa y era practicamente imposible encontrar algo en particular.

Reglas del Thread: LOS USUARIOS HABLAMOS de POD X3 Series.

01. Este Thread es para uso exclusivo de los usuarios de POD X3 Series [Pro, Bean o Live].

02. Se podrán compartir todo tipo de experiencias y comentarios referentes al Software y al Hardware de manera general.

03. Respetar y tolerar cualquier tipo de creencia, opinión, juicio o valor por parte de todos los usuarios de este Thread.

04. Dentro del Thread NO se deberán PUBLICAR PREGUNTAS ABIERTAS. Para hacer una consulta deberás crear un Nuevo Thread por tu cuenta y marcar la casilla como pregunta.

05. No se contestaran Nuevos Threads que no estén marcados como preguntas.

06. Cuando hagas alguna consulta o pregunta trata de aportar todos los datos tecnicos de tu equipo y referencias particulares.

07. Si deseas compartir información personal y material como: Blogs, MySpace, Youtube, etc. HAZLO DENTRO DEL PERFIL DE TU CUENTA.

08. Se amable y servicial, estamos aquí para crear y procurar una comunidad virtual.

09. NO LUCHA DE EGOS, NO SARCASMOS, NO PUBLICIDAD, NO BUSQUEDA DE ATENCIÓN.

10. No contestare Preguntas por Mensajes Privados. PARA PREGUNTAR CREA UN NUEVO THREAD

11. Se denunciaran cualquier tipo de comentario, opinión y actitud de carácter ofensivo.

ATENTAMENTE:

_______________________________

Ψ Montu™ [ميخائيل] - Lead-thal Guitar®

Line 6 POD X3 Live ¿Cómo calibrar Pedal de Expresión?

http://line6.com/community/thread/1164

Line 6 POD X3 Live - Formas de conectarlo

http://line6.com/community/thread/1159

¿Cómo descargar Line 6 Monkey?

http://line6.com/community/thread/1148

Line 6 device and AMD Turion X2 Mobile Processors Investigation

support@line6.com — Tue, 23 Jun 2009 18:44:45 GMT

Guys,

I'd like anyone who is having issues with pops and clicks with these sepcific processors and our drivers to please post on this thread EXACT computer specs and a concise and detailed recipe of how you are able to reproduce these pops and clicks.

I've been streaming music now on an HP DV9 laptop with an AMD Turion 64 X2 Mobile processor on Vista Home Basic 32 bit now for about an hour without one pop, click or CPU spike. Help me reproduce this so I can help you guys get up and running! Thanks.

Line6Miller

New x3 live ?

support@line6.com — Sat, 21 Nov 2009 02:13:14 GMT

I am thinking of buying a new x3 live tommorrow from my local guitar center. Will it have the usb drop out fix update allready in it?

MAC OSX 10.6 Snow Leopard x86 & Line6 Edit for PODxt Pro

support@line6.com — Mon, 28 Sep 2009 12:41:01 GMT

Guys,

I'm getting the following exception when trying to launch Line6Edit for my POD xt Pro on Apple's latest OS on a Mac Mini :

An exception was caught.

java.lang.UnsatisfiedLinkError: cmn.l6java.utils.L6EmbeddedUtils.nativeHideSplash()V

App info: Line 6 Edit 3.01 release - build 99 - Fri Oct 27 14:49:03 PDT 2006

Date: 9/28/09 1:37 PM

In thread: Thread[main,5,main]

OS: Mac OS X (10.6.1 i386)

Java VM Version: 1.6.0_15

Stack trace:

java.lang.UnsatisfiedLinkError: cmn.l6java.utils.L6EmbeddedUtils.nativeHideSplash()V

at cmn.l6java.utils.L6EmbeddedUtils.nativeHideSplash(Native Method)

at cmn.l6java.utils.L6EmbeddedUtils.HideLauncherSplash(L6EmbeddedUtils.java:39)

at line6editbase.app.L6EditorApp.Start(L6EditorApp.java:459)

at line6editbase.app.L6EditorApp.access$200(L6EditorApp.java:42)

at line6editbase.app.L6EditorApp$L6ELauncherBootstrap.OnLaunch(L6EditorApp.java:310)

at cmn.l6java.app.L6App.Launch(L6App.java:194)

Any ideas ?

Cheers,

Stricnine.

Pod X3 Live blank screen and no sound

support@line6.com — Mon, 16 Nov 2009 09:39:27 GMT

I went to my gig last night and my Pod X3 Live started with a blank lit up screen and no sound. All other buttons lit up correctly, could change patches/banks, tap tempo etc, but a full blank screen and no sound.

I thought it could be adapter problem so I used the Line 6 adapter of the other guitarist in the band, but nth changed.

I tried to start the unit in safe mode, it apparently started in Safe Mode (no other pedals lit up this time), but since the screen remained blank I could do NTH!!! So I had to play the whole pop/rock band gig with a guitar directly into PA as the lead player of the band. If you play one gig like that, you'll know what I suffered!

When I got home, I connected X3 to my PC and Monkey recognizes the device, so does Gearbox. I can change the patches in Gearbox, but still no sound.

And what is more funny Monkey doesn't show the firmware info and the driver details in its "update" page.

I tried to record into Ableton Live. There is such an extremely low level and distorted sound. It is clear that the device can change patches, I could hear it after I normalized the recorded tracks.

I also tried reinstalling the Monkey and the device drivers, but nth changed.

So this is my 3rd Line 6 Device that leaves me in frustration in the middle of gig on stage. I experienced the same with my Variax 700 guitar and also with my bass, both with the very common "suddenly some strings go softer or even silent than the others" problem.

So how angry should I be and what is your solution to my Pod X3L problem?

Caglayan Yildiz

PS: Yes, there is an authorized dealer/service here in Turkey, trying to repair my Variax 700 guitar for 6 months with the help of you guys in USA.

Sound Squeak when using pedal as volume or wah

support@line6.com — Thu, 19 Nov 2009 05:09:34 GMT

Hey Guys,

Since the first day getting my podx3 live [bout a month ago], i hear some kinda squeak or long overtone of some sort when i rock the pedal back and forth when im not playing anything.

I read a question about a squeak but it sounded like it was coming from the user's pedal and not from the sound single from the pod.

Would like to hear some answers =]

Thanks everyone!!

Recording using POD X3 Live?

support@line6.com — Sun, 15 Nov 2009 18:22:03 GMT

I recently bought a POD X3 Live and found about the USB audio drop out problem. So, I need tips on alternative ways to record using a computer, knowing that I use POD Farm Plug-in in Ableton Live. Please keep in mind that I live in Egypt and it will be very difficult to attempt the hardware fix. Thank you in advance for your time and effort.

The M9 user interface - Line 6 missed the mark

support@line6.com — Sat, 14 Nov 2009 14:53:28 GMT

I find that the single LCD on the M9 makes for a very limiting user interface. You've gotta have a damn good memory to essentially memorize what you've placed in any of six slots in six, or even worse 24, different scenes because the M9 does virtually nothing to help you know what's where ("Hmm, is that blue light in the top row of the second slot of scene 4 a flanger or a chorus? And which delay is that green light?" - this is not an easy decision process in the middle of a gig when someone calls a tune, or even in the middle of a song). I like my M9 and I've decided to keep it, but this limitation was almost a deal breaker for me.

To be honest, I think the user interface is a fundamental design flaw of both the M9 and M13. I mean come on, an LCD that displays a small black font on a blue background for crying out loud? Figure that the average player is nearly six feet away from that display or more if you're leaning back or whatever, and it doesn't take a rocket surgeon to realize that it's going to be hard to read. To me, Line 6 has designed a performance-based product that has a UI more suited to desktop use. What other pro-level, floor-based unit has such a tiny and unreadable display?

I think Line 6 should have incorporated either a second, easy to read LED display (too late for that, obviously) or they should somehow configure the existing LCD/LCD's to display a larger font on a lighter backround. Maybe a user-definable scene name that scrolls in the window or something like that. With the M9's single LCD this is particularly important.

Crackling in monitors, using Toneport UX1

support@line6.com — Sun, 08 Nov 2009 02:26:48 GMT

I've tried the recommendations that have already been posted, including optimizing my computer settings, downloading the latest drivers and software versions, and trying different settings for buffer size, bitrate, and so on. I've checked all the hardware (monitors are brand new, cables are new/not damaged). My computer should be plenty fast enough (and when I'm not using monitors, it handles the recording software fine, with processing and memory to spare). So I've kind of reached my wits end...I just spent a bunch of money on these monitors and I can't hear anything but crackling static.

Hardware:

Laptop (Windows Vista, 64bit, 2.10GHz, 4.0GB RAM)

Toneport UX1 (connected by USB 2.0)
M-Audio Studio Monitors (connected by two 1/4" cables to Output from Toneport)

Guitar or Amp (into 1/4" Instrument input on Toneport)

Software:

Line6 Gearbox (usually set on bypass, if I'm recording direct from an amp)

Ableton LiveLite 7.0

product registering for second hand pod x3

support@line6.com — Sun, 15 Nov 2009 22:01:19 GMT

Hello,

I got a problem of registration for a pod x3, it's a second hand bought at MUSIC POWER in Paris in september. the serial number is 21X3B2S5752001830. What could I do?

Thanx

Mk2 Videos or Audio samples?

support@line6.com — Wed, 28 Oct 2009 03:06:59 GMT

Anyone got any samples/examples?

Recording Music

support@line6.com — Wed, 18 Nov 2009 12:54:42 GMT

Hello,

I bought the line 6 pod farm for my boyfriend so he could record his music and burn it to a CD. When I went to Guitar Center, that is what I told them I was trying to do and they sold me the Line 6 Pod farm. And while he absolutely loves it and all that he can do with it, he still cannot seem to get it to actually record his playing to his computer in any format that can be shared or burned to a CD. Is he missing a step or is he missing some other system or program that is needed to actually be able to accomplish that part?

Thank you!!!

Windows 7 64bit

support@line6.com — Mon, 05 Oct 2009 04:31:17 GMT

Hi,

I just recently installed Windows 7 64bit operating system, this is final retail version.

I have POD XT live and Pod farm, etc and I installed the POD XT live drivers and Line 6 Monkey. However, whenever I play back an audio, it has a crackling sound.

I don't know why this is happening. I also browsed the forum and tried some of the suggested work arounds but this issue isn't resolved.

Can you please tell me what I should do to resolve this crackling sound?

Also the LIne 6 Monkey doesn't show anything listed all under Updates. I installed the Line 6 Monkey 64bit version that is supposed to be compatible for Vista 64bit but that

didn't make any difference and the crackling sound is still there.

Thank you for your help.

Charles Laub

email: charle39@gmail.com

POD XT Live ESN: 01466556

Pod XT Live Expression Pedal Failure

support@line6.com — Sun, 15 Nov 2009 17:47:30 GMT

My expression pedal has been giving me fits lately. During the last several performances (I play every weekend) it's been a guessing game with this thing. When I power up the unit it will perform as it always has in the past but lately after a short time the expression pedal will suddenly fail the result being full output of the particular patch down the line.. Sometimes if I power down and power back up the problem will go away but then reappear a short time later. It's unpredictable. Other times when I power up the expression pedal doesn't work at all, full volume. I've been running a cry baby down line to try to manage this but it very inconvenient and is certainly not what I want. I've read about recalibrating the pedal but that doesn't sound like thats the answer. The pedal does work SOMETIMES b ut only for a short time. Whats up?

Using a Boss FV-500H pedal with the X3 Live

support@line6.com — Fri, 20 Nov 2009 06:27:12 GMT

Was wondering how to calibrate this pedal when connecting it to the X3 Live. I connected it to the Pedal 2 Input as an expression pedal. The problem I'm having is the toe down position is minimum and the heel down position is maximum. How do I reverse this? Is this pedal compatible with the X3 Live?

No firmware/driver update for X3 Pro with Monkey

support@line6.com — Tue, 17 Nov 2009 20:33:16 GMT

Hi,

I've just bought an X3 Pro, and wanted to update the drivers and firmware, both of which are at 1.00.

I have the latest version of Monkey installed, and it identfies my X3 Pro is connected. However, in the updates tab, the only thing that shows up is the Applications sub menu. No drivers/ firmware options to be seen (which can be seen in the updates tab when I switch devices to my XT Pro). So there is seemingly no way to update the firmware or drivers!

Any help very much appreciated.

M13 Editor (for Mac)?

support@line6.com — Thu, 19 Nov 2009 22:36:00 GMT

Does anyone know of software that will edit the M13 - like a GearBox for the M13?

Is Line 6 developing one? Or adding it to GearBox?

Help on Hooking a Flextone III directly to my Computer?

support@line6.com — Tue, 17 Nov 2009 19:02:53 GMT

HI have a Flextone III amp, and I'm looking to start recording music through my computer, so I need to know exacly what cords I would need to buy and where to plug those cords in. If the quality of sound depends on whether I buy a cheap cord or an expensive one, then I would like to know that too, because I want to get the best quality I can afford. Thanks for your help in advance.

Josh

Spider Valve MKII Comms board

support@line6.com — Wed, 18 Nov 2009 22:11:08 GMT

Hi guys.

I've tried asking Line6 this off the board, but I've got no response. which is fine. if the answer is 'yes it will work' then that means some of us wont upgrade our amps. but that's not my point.

I would like to by a SV MKII maybe a head, maybe a combo. I'm not 100% sure on that yet. I hear the SVPre is on its way for the MKII in a few months, so that's good news. but here's what I'm thinking.

I have an SV Pre and my SV12 is way out of warranty now anyway, and I have taken a look at the communications board in the amp before, and my feeling is that the FBV communications protocols are something similar to MIDI, but with a fundamental difference so that they're not compatible. BUT it would be silly of line6 to make the FBV protocol so different to MIDI that some kind of translator device couldn't sit in the back of the amp with FBV and MIDI on one board (as I guess it is in the MKII, as when you look at other amps with both like the vetta, the FBV and MIDI ports are next to each other) and then basically the amp's channel switching is controlled by FBV, and the MIDI signals are just translated in the amp in realtime.

So where am I going with this... well is communications board in the SV MKII (with FBV and MIDI on it) the same as the SV MKI board but with the added MIDI things and the MIDI to FBV translator?? If this is the case, and the actual connections from the board to the amp are identical in the SV MKI and MKII that would mean that some of us who will eventually own an SV MKI and an SV MKII could try to buy this board from a line6 service center and swap it out, thus giving us the ability to control both amps with out M13!!

obviously those of us who choose to control the amp with FBV pedals, can control both amps at the same time using space's fbv Y splitter (i guess... has anyone tested this with 2 SV's yet?) and then use the MIDI out on the SV MKII to perhaps change scenes on the M13 if thats possible.

anyone got any ideas about the comms board or the other info?

Pops & clicks issue

support@line6.com — Wed, 11 Nov 2009 19:54:49 GMT

Hello,

i'm unlucky to experience the TonePort pops & clicks issue.

I've been said to start a new topic and post my pc's specs, so it could help.

So:

ASUS k50AB (notebook)

Windows XP SP3, 32-bit, slightly modified (just for the looks +few program installed, not important)

AMD ATHLON X2 QL-64 (2.10 GHz, 1MB cache)

4 GB RAM (Windows reads only 3,25 GB because it's an XP, still)

ATI Radeon 4570 (i doubt that's important, but whatever)

250 GB HDD

WiFi IEEE 802.11b/g/n
LAN 100 Mbps

So you can see i experience the common noise problem on Windows XP and having an Athlon, not Turion.

I've got TonePort UX1.

None of the solutions posted helped.

Please do something, i hope you guys will be able to fix this.

Sidus

Flash Update on display

support@line6.com — Tue, 17 Nov 2009 17:19:50 GMT

Hi,

I have a problem with my POD X3Live.

I played 2 hours, pod was connected into computer via USB.

Next i turned off POD for 15min. Computer was still turned on.

When i turned on again, on the display showed first Line 6 Logo and next text "UPDATE FLASH".

When I update flash via Monkey on the display show text "UPDATE FLASH..."

But after restart POD X3 Live, this text is still on display .

Can you help me? Or i have to send my pod to repair?

variax out of tune, intonation didn't help

support@line6.com — Sun, 15 Nov 2009 20:33:16 GMT

Hello! I've had my variax 500 electric guitar a couple of years now and it has worked flawlessly until now. When I play barre chords with the lowest keynote on the a-string (for example a high E) the b-string and the g-string doesn't "agree" and i get that tremolo effect which occures when the guitar isn't in tune. However the guitar is perfectly tuned cause when checking the strings separately on those frets that are problematic they're in tune. And I tested to record when first playing on the b-string and then I dubbed that with playing on the g-string and it sounds perfect. It's only when they're played together at the same time it sounds out of tune. If i tune down the b-string just a little it dissapears, but then all other chords gets out of tune. As i've just had it in for intonation I know that that isn't the problem, and i've checked that all frets are in tune. My guess is that something is wrong with the technical part of the guitar, maybe the piezo mics are damaged or something in the "computer" of the guitar. I don't know what to do, I guess I need to get service, but when searching for a service center in sweden i get no results, why is that?

X3 Live

support@line6.com — Mon, 02 Nov 2009 08:00:11 GMT

Hello!

I have a Line6 HD147, and I want to ask that, if im using a Line6 X3 Live as channel switcher thru Midi, can I use the X3 Lives other features?

For example : I make a sound with the X3 live to channel 1, then I make a sound with the HD147 to channel 2.

Thanks for helping!

Bakó Tamás from Hungary

FBV shortboard malfunction

support@line6.com — Thu, 12 Nov 2009 17:25:24 GMT

Yesterday I used my new Spider IV 150 w/ MK II shortboard with the band for the first time. I moved it from home, plugged it in and hooked up the shortboard. The amp worked and the board lit up but the volume pedal was on full and would not shut off in the heel down position. I was able to switch pre -sets but still no volume pedal. I procceded to use the gear without the pedal and after a while it started to work. Then the wah wah quit working. With the wah turned on both the green volume and the red wah light were lit, but the wah wah didn't function. After playing for a while I tried it again and it worked! I've got it set up again at home and everything seem to be fine. What happened? I bought this rig to try and simplify my gear set up but so far it's been a real headache. I confess that I'm not a techie and I may have bungled something but it was working fine at home ,and it's not as complicated as my Pod X3 Live pedal, which works fine...so far.

Also the FBV calibration steps that come with the downloaded Advanced Guide for the Spider amp don't do anything. I followed the directions to "power off the board, press and hold the 'D' footswitch while powering on the board'. There's supposed to be an LCD readout :Calibrate Pedal" but there isn't any such display . So I don't know if this thing is even "Calibrated". It seems to work fine, when it's working. Is it actually necessary to calibrate it?

Thanx.....

..regarding x3 live effects loop..

support@line6.com — Sat, 21 Nov 2009 11:03:38 GMT

..i've got 2 tonebone pedals with high gain settings in the loop , configured 'pre' , and yet to get enough level , the return is at +20db -

the amp block is off , and i've got the eq set with mid cuts , to try and get the cleanest sound , going into the fx return of a marshall avt combo..

this works ok , but if i try to switch the amp block on , the levels all are way too low -

if i put the loop 'post' , then the comp/boost doesn't have nearly the desired effect..

i must be doing something wrong..

also there's alot of noise when the pedals are on - the gate seems to have little effect - shouldn't it be at the end of the chain?

lastly , the momentary display feature for the amp tone controls doesn't seem to be working at all , minor gripe , but still ??

any advice appreciated , thanx , cam..

M13 Power Problem

support@line6.com — Thu, 26 Mar 2009 21:18:13 GMT

I have a power problem with my M13. I've had it for about a month and until now it worked flawlessly. But a couple days ago it started powering off and on on its own. I've checked my electricity outlet and connections and everything is workng properly. What could be causing the problem? Do I have a defective unit? Thanks in advance.

POD 2

support@line6.com — Sun, 15 Nov 2009 14:34:22 GMT

Have an original pod and software. Just got a macbook and tried to use software. Says, "Classic environment no longer supported". Is the software no longer useful? Is there something I can do to remedy the problem? Not a big techy and only need the capabilities that came with ver. 2. Thanks.

Is there a video anywhere that shows how to navigate the buttons on my pocket pod

support@line6.com — Tue, 17 Nov 2009 04:01:53 GMT

Is there any documentation or better yet, any video that better shows how to navigate the buttons and knobs on my pocket pod. The instruction book doesnt explain how to navigate it clearly enough for me.

Thanks for any help

My computer can't hang when I have to many plugins (Pod Farm) being used at once.

support@line6.com — Fri, 20 Nov 2009 01:39:07 GMT

I pretty sure it's not my computer though, this is a very good cpu I have, a beast. I think it has more to do with the music recording software I'm using, Magix Music Maker 10. This is particularly cheap software, like 60 bucks 4 or 5 years ago. My friend gave it to me. It does alright and can use the plugins, gearbox or pod farm. When I have 7-9 tracks using the plugins its tough for my computer to keep things smooth, no hick ups etc. Is this gonna be a problem no matter what kind of recording software I use? Is there a limit to how many tracks can use the plugins at once before it freaks even the best computers out. I was thinking about getting Cakewalk Sonar software. Will this help? I record guitar, bass and vocals dry through the POD X3 live and use plugins in the mixer of Magix Music Maker to get things to sound best so I want to have pod plugins on lots of tracks if needed. Please can some one give me the rundown/technical specs on this? Thanks.

Strymon with MK2 HD100?

support@line6.com — Sun, 15 Nov 2009 13:48:37 GMT

has anyone tried to do the strymon mod to the mk2 hd yet? if so did it help as much as the mod did for the original. if not Wonder how long it will take for strymon to release one for the mk2? Hint, Hint.

Whats up with the 4x12 sv cab?

support@line6.com — Thu, 19 Nov 2009 20:41:43 GMT

I'm wondering if anyone else feels the same as me. L6 is an american company right? and I know that they build them in China to keep down the cost for everyone, and that helps out everyone. But my problem is the speaker choice. Don't get me wrong Celestion has made some very defining sounds, but are they realy the right choice for L6? I mean Eminence is made in the USA, so why does a USA based company use chinese crap? why not help out the Americans, and Besides that Eminence speakers sound much better than Celestions do anymore ( Probably that whole not made in England thing) take for example the Celestion V30 and compare them to a governor by Eminence ( just bear with me) I know they are not the "Same" eventhough they are compared against each-other. But the Governer is a WAY smother sound than a V30. And thae eminence V12 $69.00 retail kills a V30 what is it now $149? or in my opinion the K100 roughly the same priceas a V30. and for less than 1/2 the price ....RETAIL!!!! so wouldn't it be nice if Americans BOUGHT AMERICAN? I've been watching alot of the @hitty economy crap lately. So my question is Who else feals this way. I know there are some people who couldn't live with out a real Celestion speaker, but honestly are they still celestions?Eminence are made in the USA with ,and get this USA parts!!!!! This has been bugging me so let me know your thoughts.

What if L6 had a speaker option?!

POD farm vs Guitar port

support@line6.com — Tue, 10 Nov 2009 03:21:04 GMT

Trying to decide which to purchase. Basically a beginner and just want to record some rhythm tracks and play lead over. Maybe send a file or CD to friends to listen to if I get something that sounds good. Also interested in software to assist with learning the fretboard and maybe has some exercises to improve rhythm, timing, etc.

Harmonizer , Pitch Shifter on pod x3

support@line6.com — Sat, 21 Nov 2009 18:29:28 GMT

Hello

ALTHO I have been a fan of line 6 for years now

( I have owned pod 2.0 , pod xt live , pod pocket , pod x3 live , pod ux 2 and i have adviced friends to use line 6 stuff ! )

Altho i think line6 is the major guitar brand of 2000'

I DESPERATELY need to know if u are going to put some damn tracking effects on pod x3

I need some harmonizer effect with my new project , so from now on , im thinking about switching to boss gear

i think boss is great but do NOT let me do this i really want to keep on using line 6 but if i have to i will switch to boss -.-

i really need to know if ur trying to implement the modulation and pitch shifter stuff on the pod x3 live

its so retarded to be in 2010 and still not have a decent harmonizer like gt3 or even better gt 8 )

keep up the good work

deepest respect

Sound suddenly choppy/distorted

support@line6.com — Mon, 16 Mar 2009 18:28:02 GMT

Hey Guys,

Got my Toneport UX2 running through my Mac via USB, and have the main audio running out of that to monitors. When using it sometimes, the audio suddenly becomes choppy and distorted, almost at a rate of 1 'blip' per second. I restart the mac and everything is fine again until it happens. What is going on??

Macbook 2.4ghz 4gb Ram 160GB Hard drive

Thanks!

Blue screen with POD Studio UX1

support@line6.com — Tue, 17 Nov 2009 11:52:45 GMT

Hi there,

Recently i'm on Windows 7 (Ultimate Version) and now I've got 'Blue screens" showing the following Stop Message :

L6UX1.SYS Address 9237B0B1 base at 9236A000, DateStamp 4a53c2b9

The first times, bluescreens appear while I was listening MP3 ine Windows media player, then in Winamp. My UX1 is my default sound material.

I had the bluescreen a few times when watching Videos on MPC Home Cinema and another time whereas I do nothing on my computer.

The message on bluescreen is always the same and showing an UX1 conflict. I think it can be an incompatibility problem with Win 7 and UX1 Driver. When I was on Wondows XP, I never had such problem.

Thank you for your help.

Intel E6600

Asus P5N 32-E SLI Plus

ATI Radeon 4870 1Go

4 Go RAM corsair.

DD maxtor 300 & 160 Go

Windows 7 intégrale.

French Version :

Bonjour,

Je suis récemment passé sous Windows 7 (version intégrale) et depuis, je rencontre un problème de type "écran bleu windows" (blue screen) m'affichant le stop message suivant : L6UX1.SYS Address 9237B0B1 base at 9236A000, DateStamp 4a53c2b9

Les premières fois le bluescreen est apparue durant l'écoute de MP3 sous Windows media player puis sous Winamp. A savoir que mon UX1 est mon périphérique audio par défaut.

J'ai rencontré le problème plusieurs fois en regardant une video avec MPC Home Cinema puis, à nouveau le même problème sans faire quoique ce soit.

L'erreure ne se produit pas intantanément et de façon aléatoire. Le message d'erreur du bluescreen étant toujours le même et indiquant le UX1 comme conflit, je soupçone un problème de compatibilité entre le Driver du UX1 et Windows 7. Je n'ai jamais eu de tels problèmes sous Windows XP.

Merci de bien vouloir m'aider à résoudre ce problème bien embettant.

Intel E6600

Asus P5N 32-E SLI Plus

ATI Radeon 4870 1Go

4 Go RAM corsair.

DD maxtor 300 & 160 Go

Windows 7 intégrale.

2010 Free Update ! Models and More for M13 - YES O NO ?

support@line6.com — Tue, 10 Nov 2009 06:26:36 GMT

Line 6 will give us a surprise to users of m13 with a new firmware in 2010 ? A new free update! and new models and more .....

thank you! I love my m13!

m13 will change the world of pedals!

line 6 give us another new update! please

Customtone for M13

support@line6.com — Fri, 20 Nov 2009 14:55:26 GMT

Many owners of M13/M9 have been trying to create great scenes for their favorite musicians. It would be very nice if these scene's could be gathered at line6.com/customtone.

...but there's nothing there.

There are a few sites that gather patches/scenes like www.vettaville.nl but there are a very few.

So why is there no M9/13 section in Customtone ? And when can we expect it

Pod 2.0 to laptop connection freak-out and frustration!

support@line6.com — Sat, 07 Nov 2009 01:26:25 GMT

I have been trying to download Line6 edit and Line6 Monkey, and I am way past frustrated. One of the main reasons I bought the Pod 2.0, was to go online and download custom tones. I can't even get the edit and monkey software to load...keeps asking me to make sure I am connected to the Internet because Java runtime environment needs to be installed, or to connect my Pod to my computer; I am, it is, but it won't.

...$200 for this Pod, and then I find out I have to buy a MIDI to USB cable in order to use it with my computer (seriously, how hard would it have been to have a freakin' USB port on the Pod 2.0? Should I really have to pay $300 for the Pod XT to have it. Come on, seriously???!!!). I'm a little annoyed until I find out the cable costs about 50 bucks, and "a little annoyed" turns into: really, really annoyed. I mean, come-on, 3 more cables and I could have bought another Pod 2.0!!

I've downloaded installed, uninstalled, and reinstalled edit, monkey, Java, and JRE a dozen times. I even completely reinstalled Windows XP on my computer to start fresh. NOTHING WORKS AND YOUR SUPPORT INSTRUCTIONS ARE CONFUSING AND INCOMPLETE!!!

Now, having said all this, I love the Pod 2.0 itself...great sounds. But can someone please help me GET THIS THING HOOKED UP AND TALKING TO MY PC BEFORE I GO COMPLETELY NUTTS?

Sincerely,

Alan

Some Experiment using M13 as Midi foot controller

support@line6.com — Mon, 02 Nov 2009 20:57:30 GMT

Well after a bit of work i realized this:

1) the M13 can work as a Midi Foot Controller

2) it works going on scene set up, at that point if u switch scene by scene than some other effect connected via midi change his preset till number 12

3) the limit it is u can have only 12 switch possibilities because at same time u can have only 12 scene viewable, u can change folder only going on knobs but in a live situation its not handable ofc, so the story of 48 scene its true only considering them as in studio use, (i have not understood how to change solder only going by foot switchs)

4) so if i have understood well i can use 12 scene at same time, selecting it the midi controller give at someother midi unit connected the right program till n.12 meantime u can arrange all the effects u want on the M13

Now a big tip for LINE6, please in the next firmware update create a way to control all the 48 scenes using the foot switches of M13 or create a new way to change folder.

Could be useful a function to go next, scene by scene and reverse.

If this function exists already than help me to find it

POD X3 Feature request

support@line6.com — Fri, 02 Oct 2009 01:34:49 GMT

Hi all,

This is the feature request that I have lodged with Line 6. I think it's a little strange that the M13 has effects that are not available in the POD X3 (especially the Pro).

Please lodge a feature request via this link: http://line6.com/company/contact/productFeedback/?topic_id=3

This is my request.

I would like to have the new effects that have been made available in the M13 included in the POD X3.

Pattern Tremolo (synchronised across Tone 1 and Tone 2 with offset control of 0 - 180 degrees)

Barberpole Phaser

Script Phaser

AC Flanger with Bucket Brigade chip modeled

80A Flanger with Bucket Brigade chip modeled

Frequency Shifter Line 6 original

Clean Bass Octaver

Smart Harmony

Pitch Glide

Particle Verb Line 6 original

Sync to MIDI beat Clock

Cheers,

Crusty

P.S.

This thread was started purely to direct people to the feature request page on this site which people are doing and that's great.

Whining and complaining doesn't achieve anything, so please don't drag down the intention of this thread with negativity.

There appears to be some misconceptions driving negative comments. Just because the POD X3 manages 2 tone paths doesn't mean it has 2 processors, it doesn't. If you open it up and peek inside you'll see just one Sharc processor in there. Also, with the improvements in the sound on the X3, Line 6 told us that the modelling was improved to take advantage of the processing power and the digital sample rate, this too would chew up a big chunk of processing power. The POD X3 has all the bass and vocal stuff in there already. It handles 8 tracks of digital data out the USB port at a high sample rate, more grunt gone on that too.

So, I am guessing that when the code cutters got hold of the hardware, they packed as much into the unit as the hardware could handle without leaving much room for any extras.

Where that leaves us is quite simple. We say thanks for making the POD X3 so much better than the PODxt, but if it's possible, could we see some of the new effects that have been developed for the M13 included in the POD X3?

It doesn't hurt to be polite. My parents taught me to say "please".

Cheers,

Crusty

Pocket Pod Footswitch! Anyone know what this is?

support@line6.com — Tue, 17 Nov 2009 12:36:32 GMT

Found it poking around haphazardly.

http://www.youtube.com/watch?v=2sDm5nYn4kA&feature=channel

Pod farm

support@line6.com — Fri, 20 Nov 2009 01:30:21 GMT

I bought a freakin pod farm, and it demanded an ilok, then I bought an ilok and it would not work with reaper, I am ****** off! How much crap do I need to go through to get this piece of **** pod farm working on my computer????????

Jesus ******* christ

M13 is nice, but.....

support@line6.com — Sat, 21 Nov 2009 11:25:14 GMT

Hi,

After being let down by a lot of 19" fx units I would like to know if the M13 is ever going to go 19". I am a fan of the Pro Series Line 6 used to make. The M13 (M19 Pro could be a good name) could replace these. Is there any chance this is going to happen..? Line 6 has the good interface and sounds to make it work. It would make minced meat of a G-Major imho. And I would buy one to clean up my rack!

Getting hum when I plug my usb cable into my computer.

support@line6.com — Tue, 27 Oct 2009 20:47:05 GMT

I think I may have an unwinnable situation here. I get alot of hum whenever I plug in my PODxt to my computer via usb.
I can alleviate these problems by

Removing power from the laptop and having it run on battery power alone (I've tried different outlets and different power strips)

Not using a tone setting with a lot of overdrive

unplug the usb (duh), but that makes recording slightly impossible (I think)

If I touch either pickup (humbucker) the hum goes away

I've done some reading, and appears as though this is a ground loop issue that there isn't a solution for (or one I found)
Granted I am on some heavy meds and my focus isn't the best.
Now this does not happen on all guitars equally

So, does anyone know how I can have my USB and eat it too?

Thanks in advance. Oh yea, I can control the hum with volume as well, but I lose the dirt if I lose the volume.

I was looking at this http://www.amazon.com/Monster-MP-HTS850-Theater-PowerCenter/dp/B00006343O/ref=sr_1_17?ie=UTF8&s=electronics&qid=1256675022&sr=1-17

A power conditioner was recommended to me, but looking at the prices of them, there's no way I can afford one, unless I am looking at the wrong place.

UX1 MIC INPUT NOISE

support@line6.com — Tue, 17 Nov 2009 04:27:11 GMT

Hello

My MIC entrance in my UX1 makes a lot of noise for itself, even if i have nothing plugged to it!!

Here are the printscreens (again, nothing plugged into MIC)... the noise is, as you can imagine, quite a lot, especially because the only way of hearing myself decenlty without licking the microfone is pushing up the gain up to almost 10dB.

0dB - 7dB - 8dB - 9dB - 10dB -

Please note the noise is independant from the setup i choose, it appears in the dry input as you can see. My guitar input works perfeclty, without any noise, wich makes this even stranger

Spider Valve MkII combo questions

support@line6.com — Tue, 03 Nov 2009 01:38:44 GMT

1) do the combos run hot? i know that the modeling portion of the amp is essentially a computer, and we all know computers like to run cool. wouldn't feel very confident about the amp's longevity if it's constantly running hot.

2) will my mk1 shortboard work with this amp? if so, will i be able to do looping w/it?

3) any way to save programs? i know there's no Line 6 Edit support. not sure if there's some other way?

4) is the cabinetry plywood, or particle board/mdf? i saw that the 412 cab is plywood so i'd like to think that that's the case w/the combos.

5) aside from the two preamp tubes and maybe different presets, what's the difference between the mk2's and the originals? features aside, is this newer version supposed to sound better?

Harmonizer in next update?

support@line6.com — Sat, 15 Aug 2009 02:40:03 GMT

Hi folks.

I just watched a video on the new Spider IV and it has a harmonizer/pitch shifter. Think that means its coming down the pipe for the M13 as well?

DL4 CAN'T RECORD

support@line6.com — Sun, 15 Nov 2009 20:15:16 GMT

Hi There

Bought a Line 6 DL4 unit yeaterday but I can't get it to record as per the manual, e.g. select loop smapler, press first button , light comes on. But on mine following this nothing happens not even a light. Any help would be useful

regards

Andy

LINE 6 DM4 Battery Power not working

support@line6.com — Sun, 01 Nov 2009 21:06:01 GMT

i own 2 of these pedals and when i put in batteries the pedal does not work. I checked the battery connectors and they receive power and the power goes into the board but for some reason the pedal doesnt work

This is the first time i tried using pedals for this baby

???

please send a reply to fordavidz@gmail.com as well

thank you David

TonePort DI-S No Sound

support@line6.com — Fri, 20 Nov 2009 20:51:23 GMT

I just received my TonePort DI-S from my GuitarPort bundle. I installed all of the software. I have the TonePort plugged in. I have a green light. I have re-installed drives more than once. I have restarted the computer more than once. I have switched USB port, computer front panel not a hub. I have all of the up to date Drivers, USB, Gear Box, etc.

I am getting no sound through my computer speakers from the Guitar. I see needles moving on Gear Box. I have twisted knobs, pushed buttons, tried combinations of things. I can hear the video tutorials played from the embedded browser at the bottom of gear box just fine.

I know there is something super simple that I am not seeing here. Why can't I hear my guitar played through my PC speakers?

thanks

koolaide

Direct Monitoring Problem

support@line6.com — Mon, 16 Nov 2009 16:11:50 GMT

I am unable to enable "direct monitoring" in cubase. I have only acquired the PODFarm plugin recently so I didn't notice this before. This was happening under cubase 3 sx and now under 5. All steinberg has to say about it is the driver doesn't support it. This is highly frustrating! I have reinstalled all line6 software/drivers and the cubase 5 is a fresh install.

Any ideas?

How do i get my Pod XT Live to work with Pod Farm?

support@line6.com — Wed, 11 Nov 2009 15:27:38 GMT

I have a xt live and i really wanna get it to work with pod farm so i can record stuff with garageband. I have connected my xt live to my com, updated everything possible through monkey. I opened pod farm and it said no compatible devices detected. So now what?

Tone settings for Spider III 15 watts

support@line6.com — Sun, 15 Mar 2009 05:13:52 GMT

On the box it says to go to the line6 homepage for tone settings... Where are they?

Amp for Pod X3

support@line6.com — Sat, 21 Nov 2009 13:03:58 GMT

I am looking for a good amp to use with Pod X3 Live that doesn't have all kinds of effects and dials on it, seeing that the X3 has all the tones I'll ever need. I was just wondering what people are using or would recommend.

Thanks

Jeff

forgot password, deleted email.

support@line6.com — Fri, 13 Nov 2009 04:12:09 GMT

i forgot my email password,deleted it. finally wanted to get back to my line 6 pod xt live and now i cant register it under a different user name cuz i cant remember my password to the old line 6 account. Help!

Hey people out there. I need Help!!!!!!!!!!!!!!!!!!!

support@line6.com — Sun, 15 Nov 2009 14:46:10 GMT

Recently I purchased a line 6 spider IV 15 watt. It's a fun little amp but I was wondering, why can't I find any tone settings on the website? I try customtone.com but it isn't in the list of products. Help!!!!

Brighton

Line 6 Edit Errors and Crashes

support@line6.com — Fri, 20 Nov 2009 02:29:32 GMT

Hi everyone, it seems there's probs to use Line 6 Edit on MAC.

Line 6 Monkey and Line 6 audio drivers work well.

Line 6 Edit can't open and say an error message when open :

An exception was caught.

java.lang.UnsatisfiedLinkError: cmn.l6java.utils.L6EmbeddedUtils.nativeHideSplash()V

App info: Line 6 Edit 3.01 release - build 99 - Fri Oct 27 14:49:03 PDT 2006

Date: 20/11/09 03:00

In thread: Thread[main,5,main]

OS: Mac OS X (10.6.2 i386)

Java VM Version: 1.6.0_15

Stack trace:

java.lang.UnsatisfiedLinkError: cmn.l6java.utils.L6EmbeddedUtils.nativeHideSplash()V

at cmn.l6java.utils.L6EmbeddedUtils.nativeHideSplash(Native Method)

at cmn.l6java.utils.L6EmbeddedUtils.HideLauncherSplash(L6EmbeddedUtils.java:39)

at line6editbase.app.L6EditorApp.Start(L6EditorApp.java:459)

at line6editbase.app.L6EditorApp.access$200(L6EditorApp.java:42)

at line6editbase.app.L6EditorApp$L6ELauncherBootstrap.OnLaunch(L6EditorApp.java:310)

at cmn.l6java.app.L6App.Launch(L6App.java:194)

Tried to download Java Environment on SunnSystems webpage, it says concerning Apple MAC System/OS

that the java on MACOSX is included and should check MAC UPDATE for the plateform but it cant find anything new or updates.

I just can't use my gears on my laptop. Especially my POD PRO XT (Updated and full ModelPacks options)

So what now ?

Best regards

Jesse

How does a dotted eight note looks like ?

support@line6.com — Thu, 19 Nov 2009 18:48:42 GMT

Hi,

Probably a M13 newby question, but I need to know.

In U2 'emulations' lots of people write to set a digital delay as a dotted eight note.

When using knob 2 I can set a numeric amount or a dotted note.

I cannot find a description of the symbol that represents the dotted eight.

Can anybody tell me what the notes represent in human language ?

Thanks in advance!

Recording vids directly to PC using Mic or USB plug

support@line6.com — Thu, 19 Nov 2009 13:16:32 GMT

Hey I was wondering if this question/issue has came up in the past. I am trying to record a vid for youtube using my POD x3 live by using the webcam software provided with my PC. When I record direct, (mic or USB connection), there seems to be an audio clipping/dropout/chopping going on. I have adjusted the recording volume and that has cured the clipping issue so it records the full spectrum of the sound but it hasnt fixed the other problem. The volume dips on the recorded track and does not stay consistent. I think I have found a way to circumnavigate this issue but its somewhat of a headache by recording the video on mute and recording the track on Audacity Beta 1.3 (which is an awesome software!!) and then using windows movie maker to combine the two to overlay the tracks. If you have any ideas on how to remove that step I would greatly appreciate it. Thanks

Lee

PS When is line 6 going to produce a cabinet/amp to support the POD family similar to the Tech 21 and the Atomic? You guys make great amps and modelers and I think you are really missing out on a great market niche.

Pocket POD registered to my Account - Line6 Monkey says it is not.

support@line6.com — Sat, 14 Nov 2009 18:47:14 GMT

I purchased a Pocket POD a few weeks ago. I have registered it to my account and it appears in my account correctly (see attached image: line6_registration_page.jpg Note: username in web account & Monkey the same; serial number blurred out intentionally). I used the Serial # from inside the battery compartment. When I launch Line 6 Monkey v1.31 and log into my account, it give me a dialog box stating, "It appears you have not registered your Pocket POD with your user account." (see attached image: line6_pocketmonkey.jpg). If I click "Register Now...", it takes me to my account page where it shows my device registered to my account. I followed your FAQ and ensured my serial number was in the form 'XXXNLNNNNNNNNNN'. I have tried the following with no success:

Logged out of Line 6 Monkey and log back in.
Waited 1 week to see if the serial number just needed time to associate.
Installed latest version of Line 6 Monkey on a different computer.
Deleted my registered device and re-registered it.

Current state of affairs: My device is currently registered to my account through the website, however Line 6 Monkey still shows it as unregistered.

Although the device is not registered it has allowed me to update to the latest firmware: 1.01, however I would like to ensure that my device is properly registered.

OS Info:

I have tried on 2 different machines running:

Windows Vista x86_32bit Professional and Ultimate.
Both are single boot systems.
The POD is recognized on both systems.
The Vyzex editor recognizes the device and I can control the POD through it.
Both machines are Intel Core 2 Duo, but running 32 bit versions of OS.
Both machines have 3 2.0 USB ports. I am connecting the POD directly to the computer.

Software Installed Machine 1:

Clean install with following software added
Reason + Record
EMU Patch Mix for a EMU 1616m
ASIO4All
Line 6 Monkey 1.31

Software Installed Machine 2:

Old OS install Vista 32bit Ultimate
Business Apps (MS Office)
Reason 4
Ableton 7
NI Kore
Sound Forge 9.0
Reaper
FruityLoops Studio
ASIO4All
ProTools 8.x
Digi002 Rack
Digi MBox2 Micro

Please advise on how to associate my POD correctly with Line 6 Monkey.

Upgrade not working properly

support@line6.com — Sat, 07 Nov 2009 23:31:30 GMT

I have a podxt live which is 4yrs old now. The problem that i am facing is that when i upgraded its flash memory with the newer version, line6 edit showed me the added amps and all but the thing is the patches dont work properly anymore. The reverb and delay didnt work for any settings. So i again rollbacked my version and now the delay and reverb are working properly and line6 is showing the earlier no. of amps.

kb37 as a real sound card

support@line6.com — Sat, 07 Nov 2009 19:55:25 GMT

so your telling us that we have to use the pod farm or some audio software to hear the line inputs on the kb37? this again is misleading in your advertising. and if I use podfarm I am getting distortion on the line in even when I delete all amps and other devices from the podfarm audio chain. I also don't get a dry channel it still runs through the amps or whatever else is in the audio chain. also I am using the line 1 and 2 inputs, why am I getting audio on the 3 and 4? I am not using an spdif input????

Spider Valve MK II Speculation Thread

support@line6.com — Fri, 24 Jul 2009 21:05:08 GMT

Okay, so it's apparently coming. Anyone want to indulge in some modest speculation?

What kind of speaker do you think the combos will come with? I didn't notice a mention on that brief store listing. Do you think Line6 tuned in to any of the discussion here on speaker replacement in the combos? Seems like there was a good consensus on just about anything besides the Vintage 30s.

By the way, here's the cached text from that web site:

SPIDER VALVE 212-MK2

SPIDER VALVE FEATURE:

Tube Power Section Designed by Reinhold Bogner - Benefit: All of the warmthand punch of a great tube amp from one of the top names in boutique tube amplifier design.
16 Revamped Models from POD®X3 - Benefit: Better sounding and better feeling amp models are optimized for the Bogner tube section. Truly the best of both worlds!
Complete Control of 20 Premium FX - Benefit: Enjoy deep editing of POD X3 quality FX, with the ability to edit up to 6 FX parameters. Route any effect Pre or Post for unmatched flexibility. Use up to 4 FX at a time.
More User Presets and Improved Preset Navigation - Benefit: Over 128 User Presets for storing custom settings. Bigger LCD display, and improved menu navigation.
On-Board Looper and Other Premium FX - Benefit: Improvise over loops, explore new timbres with the intelligent harmonizer, pitch shifter, and auto-wah. Get even greater control with FBV.
Seamless FBV Integration - Benefit: The FBV Shortboardis essential for controlling Spider Valve on Stage. The FBV Express adds additional FX like Volume/Wah.
Upgradeable Amp Platform via FBV Mk II - Benefit: FBV Mk II Foot Controllers feature USB connections and open possibility for future firmware upgrades.
128 User Presets - Benefit: Gigging with the rock cover band, the jazz trio and the metal project? SV Mk II has you covered with 100+ User Programmable Presets.
Performance Mode or Studio Direct Mode - Benefit: In Performance mode, the XLR direct out is tapped off the transformer, capturing tube interaction (Master Volume will affect Direct Out). Studio Direct mode eliminates the tube interaction
MIDI Compatibility - Benefit: MIDI In/Out jacks allow for integration with traditional channel switching systems.

UX8 turns on, cannot connect, and can't turn off

support@line6.com — Mon, 09 Nov 2009 06:17:47 GMT

Hello,

I have a UX8 that suddenly stopped working, when i pluged a guitar in INST, port 1

What happened, is that the UX suddenly froze, some clip lights were on, others were dim red, it simply felt like my system was twitching.

So i tried to turn it off, but it didnt work.

I unpluged it and when I pluged it back in and turned it on, the clip lights were going form left to right ( the two clip lights next to the meters were not on nor were they flashing).

and i cannot turn it off, so I have to unplug it again..

I thought it was a tough piece of hardware..

Can anybody please tell me what has gone wrong?

thanks!

Hiro

( Sorry for the double post)

Firmware Corrupted on Variax500?

support@line6.com — Sun, 01 Nov 2009 19:52:54 GMT

I tried to install Workbench with my PODXT Live and Variax 500 connected. The installation failed and I then noticed that my XTLive had frozen. Unplugging the variax un-freezes the POD. Line Monkey also no longer sees the variax.

I posted a thread (11-04-2009) and tried all the advice with no success. As the axe was only a few weeks old and thus under guarentee I returned it to the Dealer for repair.

After three months at a 'Jack of all trades' repair facility ( No disrespect intended) that does Line6 repairs for the agent and dealer, I asked to have my ghit returned so that I can have a look at it myself (Retired Electronic Engineer). He told me that there were 4 more Variaxes that had been in for repairs for like forever.

He had them all recalled and I managed to repair them all in one day. 3 were as a result of simple bad connections, 1 had a short circuiting track on the rj-45 output assembly but sadly I could not repair my 500. Through a process of illimination with parts from another 500 I determined that the fault is definitely on the mainboard.

I have now found another thread from another person who encountered a similar problem after a failed upgrade using a PODXT Live and it turned out that the Variax fimware had been corrupted during said failed upgrade.

"This sounds a lot like what happened to me...ie I used the POD XT Live to update my Variax 500...it failed. My Variax couldn't be 'seen' after that. Line 6 UK now want at least £60 to reflash the little AM29LV200B IC on the mainboard"

As you must have gathered, No we don't have a bona fida, dedicated Line6 Service Centre in South Africa. Any Suggestions?

Thanx

Carlo

Message was edited by: carlo_leone

DL4 looper problem

support@line6.com — Mon, 16 Nov 2009 18:27:22 GMT

I just bought a DL4 cheap off craigslist and the looper does not work, is there a quick fix or am I out of luck?

Variax Ethernet Connection

support@line6.com — Fri, 20 Nov 2009 14:36:17 GMT

I have a problem with the connector in the guitar. The plastic that holds the jack to the body of the guitar cracked and broke, so the jack floats inside. Because of this, I think, everyonce in a while the guitar will cut out and will not be seen by the podxt. I unscrewed the connector on the guitar and tapped the jack where it was broke to help make it more solid. It worked great for a day and then it started cutting out again. Is there any way I can get hold of the jack and the little circuit board that it connects to? It's out of waranty and I'm technically inclined enough to replace these parts. Thanks

VYZEX Editor Screen - Not able to see all items

support@line6.com — Mon, 29 Jun 2009 15:03:56 GMT

The screen is fixed size and does not display all the tones in the list and it does not provide an in window scroll.

Is this standard as I am using it on a notebook. Are there any planned updates? Can you use gearbox with the pocket POD?

Any help would be appreciated.

Cheers

Dave

Line 6 Edit on Windows 7 32bit

support@line6.com — Mon, 26 Oct 2009 22:33:01 GMT

I installed Line 6 Edit version 3.02(which says "This version of Line 6 Edit is compatible with JRE 6") on a Windows 7 32bit PC. I also installed the Java environment JRE 6 Update 16.

I'm getting "Could not find valid Java runtime" error message when I launch Line 6 Edit.

Any idea on how i could resolve this issue?

Thanks alot for your time,

Monkey doesn't show Pocket POD 1.01 flash update

support@line6.com — Wed, 18 Nov 2009 18:13:04 GMT

Hello,

I'm a customer from Germany and bought a Pocket POD back in December, 2007.

Today I read about the 1.01 flash upgrade for my Pocket POD and downloaded the Monkey software v1.31.

I connect my Pocket POD to the power adaptor first and after this connect it to my PC with the Line 6 USB cable, no other cables are connected to the POD.

The POD works fine with the Vyzex v1.17 software, so I launched the Monkey (after closing the Vyzex software). It connects to my Line 6 Account but shows "There are no updates available" :-(

[img]http://imghost.glorp.de/i/7515363356a7.png[/img]

The Pocket POD is registered within my account and the Monkey doesn't show any message about device registration either.

The POD shows "Version 1.00" at startup...

[img]http://imghost.glorp.de/i/22593416da5b.png[/img]

Thank you for any help.

M13 Switching off

support@line6.com — Sun, 15 Nov 2009 22:07:43 GMT

Hi,

I have had my M13 for 11 months now and it has never let me down during rehersals or gigs.

Yesterday it started switching off the on again. Is this a known issue? I live in the UK please advise.

Cheeers

Paul

X3 Live 8000900C error

support@line6.com — Wed, 18 Nov 2009 09:47:48 GMT

I am having the 8000900C error between my X3 Live and my windows XP laptop. It worked without problems when I last connected them a few weeks ago. I read the related discussions but I cannot find any solutions. The X3 Live still works fine with my G4 Mac (10.4.11) but I would like to solve the problem with my laptop. Please help, thanks a million.

Sonidos Clean...tienen distorsion.

support@line6.com — Wed, 24 Jun 2009 01:03:20 GMT

Hola como les va? soy otro feliz poseedor de un Pod X3, y tengo una duda. No logro conseguir sonidos realmente limpios, con la simulacion del Roland JC120. Me llama la atencion, probe dejar solo el amp, y la simulacion de cajas. Con el gain en 1 e igual sigue distorsionando. Sera un problema de mi pod? o alguna mala configuracion?

Probe tambien bajar el volumen de mis pickups, (EMG 81). Y el "problema" continua.

Tambien tengo el pod totalmente actualizado con el Monkey.

Espero que me puedan ayudar.

Saludos!

Hum and Noise, Noise and Hum

support@line6.com — Mon, 09 Nov 2009 03:56:01 GMT

This has probably been discussed many times , but I can't seem to find the answers.

Just got a X3 Live this weekend.

Using a Strat, thru headphones, or through a mackie mixer .... I'm getting a TON of Noise and Hum on pickups 1-3-5. So much so that most patches/presets are unusable due to the xtreme noise. A few presets even exhibit extreme noise using pickup positions 2 and 4.

I've also tried my humbucker guitar and it's a little better, but still more noise than a normal stage setup using a real amp. Waaayyy too much noise.

I've tried several different outlets throughout my house and it stays the same. I would certainly not be able to play this thing out live with this much noise and not being able to use pickups 1-3-5

Any ideas or solutions will be hugely appreciated. Thank you,

research paper - comparison pod x3 live with a real amp

support@line6.com — Wed, 11 Nov 2009 00:08:57 GMT

hello everybody @ line6 as a line 6 freak - not since the very first hour, but since i bought a pod xt live - i am now a proud owner of the pod x 3 live. i play it through a marshall 9100 poweramp and a hughes&kettner vintage 4x12 box. when i had to find a subject for a research work that i have to do for my diploma at the SAE in zuerich, switzerland, i came up with the idea of comparing a marshall jcm 900 with both the clean- und dist-channel-emulation in the pod x 3. my plan is to compare the pure pod sound with the pod played through the poweramp and the jcm 900 box, and to compare these with the real amp. i intend to really test the pod out, listening, measuring, comparing waveforms etc. empirically i would expect the pod to do a real good job in this challenge! it is clear to me, that you can't reveal your business secrets just for the success of my work, but... here is my question: could you help me with some deeper insights into the principles that are applied in the pod x 3? could you eventually give me more informations about how the models are designed? ... if it has something to do with convolution or whatever? are there books about programming audio dsp which could help me to understand better how the pod really works? [please forgive me, my english is rather primitive...but i hope i can make myself understood] in exchange for your help - i know it is not much i can offer - i would send you a copy of my work. thank you for considering my request with my best regards backstone

Variax 700 will not stay in tune?

support@line6.com — Fri, 04 Sep 2009 12:18:59 GMT

Hi all,

I have a variax 700, I usually use slinky 9 / 42 strings and have my tremolo setup floating. I'm a college lecturer / recording engineer who has also set up guitars for over 20 years. The variax is a superb guitar in every way, apart from the most basic aspect........it will not stay in tune. I hope the guys at line 6 read this because it is staggering that such an amazing instrument has such a massive flaw. (the size of this massive flaw cannot be exagerated. A guitar which will not stay in tune is useless).

The problem only exists if the tremolo is set to float (the whole point of a great tremolo like the LR Baggs unit....and the whole point of buying a variax 700 as opposed to the much cheaper 300). After using the tremolo, the tuning will be raised or lowered.....it will not come back to the correct pitch....ever. If you dive bomb or even just dip the pitch of a note on any string.....on releasing the tremolo bar the guitar will be flat by up to -12 cents. If you pull back on the tremolo bar to raise a note and then release the bar, the tuning will be up to 12 cents sharp. An interesting point is if you tune the guitar and play without tremolo......perfect tuning. This means the problem is not the machine heads.

Many people on the forums have suggested to each other the following, but I think I have found the reason....and nobody is going to like the answer.

Lube the nut - This in reality is not a solution. A well crafted nut will not need lube. The 'bone' nut on the variax 700 is not bone...a synthetic bone substitute maybe, but not bone. I've seen other people describe it as chewing gum it is so soft.

File / reduce the depth of the nut - At 5 mm the string contact with the nut is too great. Using a file to reduce this contact area down to 2.5mm is a good idea.

Install a new nut - a Gibson type drop in from graphtech or an earvana nut (£35 option).

Install a set of locking machine heads - Reducing the winds on the tuning post to a half turn improves tuning stability (£60+ option).

Increase string tension - changing to a heavier set of strings eg from a set of 9s to 10s (£5 option).

Increase spring tension - making sure you use all 3 springs on the rear of the tremolo.

Cut the 'condoms' off the springs - Variax is the first guitar i have ever seen with these fitted to the springs. I would love to know why they are fitted (Health & safety?) as you cannot operate the tremolo at all with them on.

The first thing I had to do setup wise was cut the plastic 'condoms' off the springs in the tremolo as they do not allow the tremolo to operate (literally) without a horrible crunching sound and feel. I have shaped the nut.....no difference. Tried heavier strings and resetup the guitar.....no difference. I usually use a set of 9s with 2 springs on the tremolo, so i tried a set of 10s with both 2 springs and then 3 springs on the tremolo.....no diference.

The problem seems to be constant no matter what you do to fix it in the area of machine heads / nut / strings and springs. The problem lies with the electronic cables connecting the tremolo/piezos to the brain unit in the guitar. If you look at the back of the tremolo with the cover removed you will see a thin cable and a ribbon cable attached to the tremolo. These cables go around the tremolo unit and through a hole in the body of the guitar to the brain section PCB.

If you watch the back of the tremolo closely as you operate it through its full range, first one way and then the other, you will notice the unit never returns to it original position due to the resistance of the cables/electronics. The stiff cables are in contact with the tremolo.

This is a serious flaw in the design of the instrument. A smaller light weight / very flexible connection between the tremolo PCB and the Brain PCB, which stays close to the base plate of the tremolo (which moves a short distance) and out of the way of the block/springs (which move a great distance) is needed.

The result of trying to acheive tuning stability with the tremolo floating, would for the average guitarist result in an extra £100 minimum to the price of the instrument, plus around another £100 in repeated setups and fitting of parts. Only to realise it is never going to happen.

This is a major disapointment as I have been sold a product which is superb in one way (sounds) and totally useless in another (staying in tune)....It is not fit for it's purpose!

I would love a reply from line 6 on this as the 700 is a professional instrument at a price of around £1000. I think line 6 know about this problem. None of the videos demonstrating the instrument on the line 6 website have any use of the tremolo unit. It is probably the reason why the guitars come with the tremolo mounted flat against the body when you buy them.

I would also like to know the purpose of the spring condoms?.....was that a bodge to help tuning stability?....in 30 years of playing guitar and 20 years of setting them up professionally I have never....ever seen any other guitar with these things fitted to the strings.

Come on line 6 guys, have the balls to reply to the customers who have commited to buying the flawed product and time/upgrades, searching for a variax 700 that stays in tune.

Andy Smith www.myspace.com/humstrumbangtwang

ux8 usb firmware unknown

support@line6.com — Sun, 15 Nov 2009 05:24:45 GMT

when im starting to power up my ux8, its working nicely. but after a few minutes turning on. the signal clips blinks on and off the line 6 monkey

detects that theres no usb firmware installed so i connect and reconnect again the usb, still the same. when itry to update that selection no response from the monkey

how can i resolve this? is my usb cable the problem?

Gig Bag

support@line6.com — Fri, 29 May 2009 11:24:01 GMT

Alright, Line 6, you've got me hooked on this killer M13 pedalboard! Where can I find a gig bag for storing it?

Display has solid black bar on top line and shows Tone2 name below it.

support@line6.com — Wed, 21 Oct 2009 15:32:11 GMT

I just updated my firmware to the latest version. Fixed an issue where I couldn't toggle between Tone1 and Tone2. But now I have new problems.

When editing, I've found that sometimes when I click stompbox (or engage the Wah, or mod, or delay) the Tone2 light turns off and the display shows black bar on top line and still shows Tone2 name. So I see the name for Tone2, but it seems I might be actually in Tone1 (or neither). Where the name for Tone1 would be, it's just all blacked out.

At that point engaging or disengaging any of the effects (stompbox/mod/delay) doesn't seem to do anything. I have to either switch to another patch, or toggle Tone1/Tone2 back and forth to get back.

It's getting very frustrating when trying to edit patches because of this glitch. It did not used to do this before the update.

It's also begun to change screens sometimes while I'm editing. I read in another post a suggestion to move all pots and park them, which is good advice for minor corrosion and buildup on the pots. But I didn't have this problem at all before the update, and now it's happening a lot.

I'm afraid that it seems I've traded one problem for two other problems.

Any help, or ideas, or ways to fix these problems?

Thanks in advance.

phil

mm4 ended to work

support@line6.com — Tue, 20 Oct 2009 23:34:54 GMT

Hi Line 6 i'm using Line 6 mm4 fm4 and dl4 for years

but some days before faced with problem - after switching during a mistake 12 vac to a my mm4 pedal it stopped work at all

i live in Belarus 220004 and there is no any service center

may be it is a well known issue and is simple repaired - there is few great technicians here so they can check it but before brining it to them i want to ask you about it

thanks

Pb of registration bellow a fire in my house.

support@line6.com — Tue, 10 Nov 2009 12:59:40 GMT

Hy,

I bougth a BASS PD XT PRO 2 years ago on ebay but i never registred because i need'nt in my using.

I have an fire in my house lasted year and the registration number is partialy removed...

The number seems to be 21BPX2B3838000027 but it don't works in registration.

I just want to make an update of my product, how can i do pls?

Paul NAUDIN

11 rue Leroy

13012 MARSEILLE

FRANCE

Paulnaudin@hotmail.com

Line 6 edit not working for me - Java Errors?

support@line6.com — Thu, 13 Aug 2009 19:44:11 GMT

I have been unsuccessful in getting Line 6 Edit to work. I have downloaded the program twice, and have been present both times to insure that the "recommended" Jave RTE was installed on my computer.

After looking through this forum, I noticed that Line 6 apparently has corrected any problem when using Jave RTE6, which I also installed from the JAVA site in an effort to fix things. This has not corrected my problem. Anyone able to offer an ideas?

When I check my Java properties on my computer, it says I am running build 6.1.blah-blah-blah...should this version not work with Line 6 edit? The Line 6 recommended version (JavaRTE5) is also on my computer. Should I delete JAVA version 6?

When I start the the program, I get the following error message:

An exception was caught.

java.lang.UnsatisfiedLinkError:

cmn.l6java.utils.L6EmbeddedUtils.nativeHideSplash()V

App info: Line 6 Edit 3.00 release - build 96 - Wed Apr 19 17:14:08 PDT 2006

Date 8/13/09 2:13 PM

In thread: Thread [main, 5, main]

OS Windows XP (5.1 x86)

Java VM Version 1.6.0_14

Stack trace:

java.lang.UnsatisfiedLinkError: cmn.l6java.utils.L6EmbeddedUtils.nativeHideSplash()V

at cmn.l6java.utils.L6EmbeddedUtils.nativeHideSplash(Native Method)

at cmn.l6java.utils.L6EmbeddedUtils.HideLauncherSplash(L6EmbeddedUtils.java:39)

at line6editbase.app.L6EditorApp.Start(L6EditorApp.java:459)

at line6editbase.app.L6EditorApp.access$200(L6EditorApp.java:42)

at line6editbase.app.L6EditorApp$L6ELauncherBootstrap.OnLaunch(L6EditorApp.java:310)

at cmn.l6java.app.L6App.Launch(L6App.java:194)

I remain hopeful! I want Line 6 edit so as to be able to move the Univibe pedal before the pre-amp on my Flex III!

I've switched my email addres...

support@line6.com — Fri, 06 Nov 2009 04:15:09 GMT

my user account: "timothyclee" was created when I purchased my POXT live, but I can't remember my password, and the email me my password function does not work since I no longer have that email address associated with this account. Please help

how can i get a manual inspanish of my toneport ux1

support@line6.com — Tue, 17 Nov 2009 17:45:29 GMT

i need information in spanish for my toneport ux1,i use cubase thank

Variax Workbench fails at startup

support@line6.com — Mon, 16 Nov 2009 17:18:38 GMT

Variax Workbench v.1.58 fails after start (message: "Could not find Java runtime"). Followed by: "Could not init JINILoader"!

Java 1.6.0_17 is allready installed on my system and works! If I need Java 1.5 (like Workbench tells me during the installation), I dont find it (Please send me a WORKING Link, the link from the installation procedure is dead!)

I hope you can help me - many Thanks!

High pitched whine

support@line6.com — Thu, 05 Nov 2009 02:29:17 GMT

While recording a kawai k5000 I get a high pitched whine this also happens if I even turn on gearbox or podfarm. So far I have tried 2 different computers, running the laptop off battery power, switching outlets, switching the power cord on the Kawai, using all ports on ux8, switching the ux8 and k5000 to different outlets, using new audio cables and using a new usb cable on the ux8.

Some strange details: usually I run things through a mixer and effects before going into the ux8, even with the voulme down to 0 on everything the whine perists. Plugging the audio cable from the k5000 1/4 of the way into the mixer and there is no whine, but I can't change the volume! It's only the k5000 that is doing it. The whine is there even with the k5000 off, but goes away if it is unplugged. I tried using a behringer ufo interface and it is fine, plugging straight into the onboard sound card it is fine, plugng right into a zoom h4n it is fine as well. In some ways it seems like a k5000 problem, but all other recording interfaces have no whine.

Any other ideas?

Thanks.

m13 bypassing all effects with one click

support@line6.com — Wed, 18 Nov 2009 10:53:00 GMT

Is it possible to bypass all the effects by hitting one button. I have parts in songs that are full of effects accross the board, but it then I have parts for solos as well as dry parts. I need a one button one click type of thing. Is it possible to do this easily with the m13? I understand I can tap a button to turn off the individual fx, however, like I said, I need to be able to do all either on or off at one time as well as have the ability to use it in stomp box mode.

Spider IV backup - question or suggestion

support@line6.com — Wed, 18 Nov 2009 02:21:17 GMT

I suspect the answer to this is "No", but is there a way to backup User settings from the Spider IV (via an FBV presumably)?

If not, can someone take that as a suggestion for enhancement.

Hopefully I'll never need it, but just in case.

Volume Petal Placement

support@line6.com — Thu, 19 Nov 2009 16:58:19 GMT

If I want to control the overall volume of the M13 would the pre or post setting be best?

I assume if I used an expression petal for volume it would take up one of the FX's, is this true?

I have'nt purchased a volume petal as yet, so any recomendations from other posters for a quailty unit would be appreciated.

Thanks,

Phil

DL4 powers up at home, but not at clubs...

support@line6.com — Mon, 16 Nov 2009 18:37:46 GMT

I may be missing something completely elementary, btu i've run through several different configurations, and have been completely unable to get my DL4 to even power up at a club.

At home & the rehearsal space, i plug in the power supply and input/output cables, and everythign is fine. This has been done in multiple locations, multiple wall outlets, different cables, and in different positions in my pedal array. however i have tried to gig with this pedal twice, and have been unable to get it to even power up. have tried multiple configurations, even plugging the pedal directly into an outlet rather than a powerstrip etc... it won't even light up. i can place it at the end of my effects chain and it allows signal through, but will not function as a pedaal.

I've been through numerous configurations, and have had several sound guys, both house and touring, fiddle around and come up with nothing.

any ideas?

Pod X3 Live GearBox question.

support@line6.com — Sun, 15 Nov 2009 17:47:54 GMT

Greetings,

I am using GearBox to edit settings on the Pod X3 live.

In GearBox is there a way to view both amp model settings at the same time without have to switch back and forth using the Tone 1 and Tone 2 buttons.?

If not, does anybody know of an alternative program which exposes both amp models at once?

Thanks

loud pop,scratch type, white noise on playback and record.

support@line6.com — Tue, 10 Nov 2009 23:25:11 GMT

I have contacted sonar support and have completed all of their trouble shooting steps. They say it must be my input device. I have tried switching over to my computers sound card and the noise does stop. I have updated all my drivers and have completely reinstalled my ux2 software. I have tried changing all my buffers, driver selection......nothing works. I have had it for over a year. Previously no issues. I have added no new hardware or software. What is going on? -thanks,

spider III 15W

support@line6.com — Fri, 13 Nov 2009 02:10:29 GMT

my amp blew up a transistor and now the repair people cant find the right one as the transistor is unrecognizable, where can I get a map/blueprint to get the transistor name/number??

GuitarPort models not working in Record

support@line6.com — Sun, 13 Sep 2009 18:44:28 GMT

I have a GuitarPort (with Bass Expansion and FX Junkie) that is licensed and working great with Gear Box. (Note I also have updated the most recent version of Line6 Monkey as well) I also just purchased Propellerhead Record, which is working fine on its own. My problem is that I can't get my tones from my GuitarPort/GearBox to work within Record. When I open Record, I get an error message saying Line6 Models could not be added because my "hardware isn't updated for use with Record yet." I am then prompted to go to http://line6.com/phrecord/ and follow instructions. However, that site simply says I need to click "Activate Features" within Line6 Monkey to activate GuitarPort to work with Record - and I have no "Activate Features" button in Line6 Monkey - there is an "Activate Purchase" button, but when I click that it asks me for my "license code." (Note that within Line6 Monkey, Record does not have a green button next to it, despite the fact that I have purchased and registered it) Where do I get that license code? I've tried my "License Number" and "Registration Code" that came with Record, but neither works.

Please tell me where to get my "license code" to 'activate my purchase' of Record in Line6 Monkey.

Thanks,

Paul

windows 7 compatability with podxt live, variax, workbench

support@line6.com — Tue, 17 Nov 2009 17:18:22 GMT

I am looking to upgrade my computer to windows 7.

i wanted to make sure before i did if the programs to run podxt live and the workbench software are supported.

i did a search before making this ? and did not find a thread that answered my question.

I know that I can try running the programs in compatability mode, but I found a few responses saying they had problems with that also.

sorry if this is already somewhere you can just post the link to the thread for me if your a better searcher than me.

thanks

TonePort UX2 - Windows 7 / 64 bit

support@line6.com — Sun, 25 Oct 2009 14:28:33 GMT

Unfortunately I could not install the latest GearBox SW for TonePort UX2 on my new Laptop with Windows 7 operating system, 64 bit Version.

When will a suitable Upgrade SW Package be available?

Thanks in advance. Wilfried

particle verb?

support@line6.com — Sat, 14 Nov 2009 15:47:03 GMT

yeah its modulated in some way...but what is the secret behind the reverb, what exactly is going on?

Spider Jam questions

support@line6.com — Sun, 22 Nov 2009 06:46:54 GMT

Hello,

Is the Spider Jam amp in the same family as the Spider IV line or is this a Spider III line? Is there such thing as a Spider IV Jam amp?

Also is the Shortboard (older version) compatible with the Spider Jam amp or only is the MKII unit?

Thanks

Pod X3 Live trouble to connect under windows via USB

support@line6.com — Tue, 31 Mar 2009 17:46:25 GMT

Hi folks !

I'm a newbie here and it's the first time I'm buying a line 6 product.

So I have a Pod X3 Live. I want to connect it to my computer which is under Windows Vista 32. With Monkey all stuff is up to date (driver, firmware, etc...).

The Line 6 sound card is well detected by windows and used as default.

At first, I can not hear any music when I use windows media player, so it's very difficult to configure Cubase LE 4.

Does anybody have an information to help me ?

Is there a well known issue upon this point ?

Does my gear have a trouble ?

Thanks a lot for your help

Direct out, Spider Valve recording

support@line6.com — Sun, 14 Jun 2009 21:21:18 GMT

Hi!

I just bought a Spider Valve 112, I have been trying to record via the direct out but I am not succeding. I wonder if I am doing somthing wrong.

my chain: Spider XLR out to a litte Behringer mixboard channel 1 the volume and the gain on the mixboard are set to 9/10. Master volume in the spider valve is set to 12 o´clock and the channel volume to 3 o´clock. I am not getting any sound from the spiders direct out.

I also wonder if it´s possible to record in silence, I mean without the spider sounding thru the built-in vintage 30 speaker.

Thanks in advance!

//Edde

Sweden

Collection Feature in Vyzex Editor not working

support@line6.com — Sun, 22 Nov 2009 09:01:02 GMT

I can't seem to get the "Collections" feature of Vyzex Editor working.

I can open the Collection View in Vyzex Editor. I can add tone patches to the Collection View, and they appear in the list. But when I quit Vyzex Editor, the Collection View pane is always empty the next time I start the program. What could be causing this?

I'm using Vyzex Editor 1.17 on a current model MacBook Pro (Mac OS 10.5.7). I'm using this with a Pocket Pod with firmware 1.01.

Thanks.

spider valve with svpre having issues.

support@line6.com — Thu, 12 Mar 2009 16:46:46 GMT

I was having issues with my spider valave a couple of weeks after the install of my SVPRE (wich I love by the way) thought it might have been the ribbon cable punch down.

Turns out it was the 1/4 jack on the front of the amp not tighted firmly...just snugged it . This caused the board and ribbon cable to "flex" when I plugged it the cable. I found this out by taking apart the cabnet and watching the connector as I plugged in my instument. After tightning with a wrench, no flex...no noise issues. everythings perfect in my amp universe once again.

I recently purchased a Spider Jam Amp. Is the FBV Express MkII the best pedal available for this?

support@line6.com — Sat, 21 Nov 2009 23:15:34 GMT

I recently purchased a Spider Jam Amp. Is the FBV Express MkII the best pedal available for this amp, and does it work with this amp?

Pod XT: Can I use an electric keyboard or bass guitar with it without damaging it?

support@line6.com — Fri, 10 Apr 2009 22:33:06 GMT

Just like the title says, I wanted to know if I plug in my electric keyboard or bass guitar into my XT, will it damage the input jack or something else? My keyboard has a 1/4" phones/output jack that I would use to run keyboard -> XT -> computer. I use an atomic amp but I won't have it connected when I do this so I'm not worried about amp damage. My concern is if the XT's input is capable of handling the keyboard output. I also want to do the same thing with my bass guitar. Also, my electric keyboard has drums that I enjoy playing and I would want to record them as well. I have a Casio WK-3000 in case you need to know that.

Bass PodXT Midi Timeout

support@line6.com — Wed, 25 Mar 2009 01:58:07 GMT

Well I finally figured out my first problem, that was caused by having the device plugged into a hub.

So on to my second problem, again everything has been updated and computer meets specifications.

Now, everything is showing that the connections are good, and the pod shows up when I start Line 6 Edit, but when the Tone Locker tries to connect I am getting a midi timeout. At the same time the process bar is showing it trying to connect the display on the pod fade in and out not completely out just dim a little.

I also received the following message;

MIDI Timeout while requesting manual mode patch

cmn.l6java.patch.L6PatchManager$DeviceNotConnectedException: null

App info: Line 6 Edit 3.01 release - build 99 - Fri Oct 27 14:49:03 PDT 2006

Date: 3/24/09 7:15 PM

In thread: L6Thread - 'L6MIDIJava dispatch thread' - started at cmn.l6java.midi.L6MIDIJava.L6MIDIJava.Start - line 206

OS: Mac OS X (10.5.6 i386)

Java VM Version: 1.5.0_16

Stack trace:

cmn.l6java.patch.L6PatchManager$DeviceNotConnectedException

at cmn.l6java.patch.L6PatchManager.AcquireDevice(L6PatchManager.java:658)

at cmn.l6java.patch.L6PatchManager.RequestDeviceEditBuffer_Sync(L6PatchManager.java:717)

at cmn.l6java.patch.L6PatchManager.RequestEditBuffer(L6PatchManager.java:391)

at line6editbase.editor.L6Editor.SetCurrentPatch(L6Editor.java:673)

at line6editbase.editor.L6Editor.SetCurrentPatch(L6Editor.java:601)

at line6editbase.editor.L6Editor.OnMIDIPatchChange(L6Editor.java:932)

at cmn.l6java.patch.L6PatchManager.NotifyListenersOfPatchChange(L6PatchManager.java:886)

at modules.sharctone.device.L6SharcTonePatchManager.OnPC(L6SharcTonePatchManager.java:133)

at cmn.l6java.midi.L6MIDIManager.OnPC(L6MIDIManager.java:626)

at cmn.l6java.midi.L6MIDIManager.HandleTrackedPC(L6MIDIManager.java:307)

at cmn.l6java.midi.L6MIDIManager.OnMIDIEvent(L6MIDIManager.java:173)

at cmn.l6java.midi.L6MIDIJava.L6MIDIJava.DispatchMIDIData(L6MIDIJava.java:550)

at cmn.l6java.midi.L6MIDIJava.L6MIDIJava.Run(L6MIDIJava.java:612)

at cmn.l6java.core.L6Thread.run(L6Thread.java:158)

POD X3 bundles

support@line6.com — Tue, 17 Mar 2009 07:33:04 GMT

Hey guys, let's compile back the bundles thread. I have them all...but I couldn't post them without author's approval...

Thanks,

Vicus

Something wrong with my SV112

support@line6.com — Fri, 10 Apr 2009 00:07:50 GMT

Something happened while I was just going through my presets. I had my FBVSB attached to the amp and all of the sudden the volume on the amp spiked up high. Tried to change patches from the FBVSB and it wouldn't. Turned down the channel volume and it went down. Then it slowly rose and fell in volume a couple of times. Turned the amp off and turned it on again and everything appeared fine for a bit.

Now when playing it seems like I've lost a good bit of volume. Normally, anything past 9:00 on the master would shake my room. Now I can turn it up to 12:00 and it's loud, but not deafening like it normally would be. It also seems like I've lost a good bit of low end.

Normally, I'd say power tube going bad. But what about the funkiness with the DSP earlier? Maybe a combination of both? I'm guessing I need to schedule a service appointment. I am under warranty. Bought the amp on Jan 16th of this year. I think I'm out of warranty on the tubes, though. But they shouldn't have gone this soon. I don't have that many hours on the amp.

SVpre issues

support@line6.com — Fri, 12 Jun 2009 18:28:27 GMT

I noticed that my SV112 got even more brittle after the installation of the SVpre. I had to set Presence knob at "zero" but with very little effect . The amp squeals when I switch to RED push. Has anyone here experiencing same issues?

I contacted Strymon support but they're closed. They won't be able to respond until the week of June 15th.

Studio UX2 and Pod Farm - Freezes my computer

support@line6.com — Sun, 22 Nov 2009 07:32:25 GMT

I was trying to install my new Studio UX2 and Pod Farm.

I downloaded the latest Pod Farm for Snow Leopard and it keeps coming up with an error message:

The System extension "/System/Library/Extensions/Line6Audio.kext" was installed improperly and cannot be used. Please try reinstalling it or contact the product's vendor for an update.

What does it mean? I downloaded the latest driver as well from the "Downloads" and it came up with the same message.

Also, as soon as I plug in the Studio UX2, it freezes my system straight and I have to Force Shut Down.

Can anyone tell me why it happens?

Thank you

The official make Spider Valve a seperate forum thread

support@line6.com — Thu, 12 Mar 2009 07:45:38 GMT

To the admins,

As Spider Valve owners we feel there are enough distinct differences between our amps and the Spider series to warrant it's own forum. Please create a seperate area.

Spider Valve owners, if you agree/disagree please post below.

Organ-like sound

support@line6.com — Sat, 21 Nov 2009 15:44:36 GMT

Hey all, I saw a post about Electro-Harmonix making some cool sounds of other instruments this morning. Thought I'd fool with my M13 to see what it can do.

Got a cool organ sound (because this uses the filter settings it's a one-note at a time setting):

FX1: Synth-O-Matic--- Freq: 70% / Q: 0% / Wave 1 / Pitch: 50% / Mix 100%

(FYI: the wave setting can change the type of "organ-like" sound, pitch should be 50 to equal the pitch of the guitar otherwise it is not truly the same note, if you lower the mix you can "tune" the pitch by comparing the wet and dry signals for equality)

FX2: Smart Harmony--- Maj or Min scale / Key A / +3rd shift / Mix 50%

(FYI: obviously the scale and key can be changed for your application, i like to save my harmonizers in different scales/keys to the 6 buttons in FX units 2&3 for more options in the same general sound)

FX3: Smart Harmony- repeat as for effect 2 for more key/scale options--REMEMBER only run one at a time

Otherwise you can place the chorus from FX 4 in FX3 and add a delay or reverb in the open FX4 slot

FX4: Analog Chorus--- Speed 20-30% / Depth 75% / Set to Chorus on knob4 / tone 50% / mix 100%

Pod Studio UX1 Not Working With Windows 7

support@line6.com — Thu, 19 Nov 2009 18:10:28 GMT

Greetings,

I've gone through all of the support FAQs/discussions so this is a last-ditch attempt. I am getting sporadic performance from the UX1 on my laptop (brand new, core i7 processor, Win7, 4g ram). Playback stutters, system sounds only happen sometimes (e.g. - running the "test" function on the sound devices control panel only plays sounds less than half the time) - thus I know it's not an issue with my DAW software. Following the manual and support FAQs, I have:

1. disabled antivirus

2. disabled all wireless/bluetooth network adapters

3. disabled the computer's sound card

4. adjusted sound settings (buffers, size, etc.)

Still, the stuttering problem when playing back and the sporadic appearance of system sounds persists. I have the latest Line6 drivers and software. Any other tips?

Thanks.

Firmware Question

support@line6.com — Sat, 21 Nov 2009 01:19:01 GMT

I have never upgraded my spider jam. Do I have to install the v2.07 firmware before I install the v2.09?

Variax importance of body & neck sound & resonance

support@line6.com — Tue, 07 Apr 2009 23:56:06 GMT

Hi there,

how important are the non-pickup characteristics of normal guitar for the Variax sounds?

Example: Are the resonance of the variax body the amount and richness of overtones which the Variax body & strings generate (BEFORE the modeling) important for the Variax sounds or are those characteristics modeled as well?

These are questions which a normal guitar would address with its body, kinds of woods, neck-construction (mount or thru etc.) etc.

But I have no idea, how important those things are to the Variax sound. If they are not important for sound then it becomes merely a question of playing comfort

Karin

POD Studio: Expression pedal and footswitches for GearBox and POD Farm

support@line6.com — Sat, 11 Apr 2009 14:15:20 GMT

Hi!

There are already a lot of threads about using expression pedals and footswitches for the POD Studio devices and the POD Farm software. Still, I am confused and also have some additional questions. I cannot just try things out, since I currently do not own any Line 6 equipment but am considering buying some. I hope there will also be answers from the Line 6 team.

So, from what I have read I conclude that there is no way of controlling POD Farm via MIDI:

Hi,

Unfortunately this has not yet been implemented. There is no MIDI spec in POD Farm stand alone or plug in however, we know this is important and will certainly be implementing it in a future release.

Line6Miller

Hi,

MIDI has not yet been implemented in POD Farm but will be in a future release. You can control the wah via the EX-1 in Gearbox at this time but unfortunately not in POD Farm.

Line6Miller

But from skimming parts of the POD farm manual, I guess there might be a way to control plug-in parameters through the DAW?! I am not sure about that... How would that work?

So, the bottom line probably is:
No way of controlling POD Farm with expression pedals or footswitches right now, but this will be implemented in the future. Correct?

However this seems to work in GearBox. So, if you have purchased a POD Studio product (which includes POD Farm software), can you download and use GearBox for free?

------------------------------

Now I have some questions about how GearBox works with expression pedals and footswitches:

From skimming parts of the GearBox manual, I conclude that you can use any third party MIDI controllers for expression pedals and footswitches. Correct?

Can you do the following:

At the same time:
- Record the dry guitar signal
- Record the MIDI commands (e.g., wah-wah positions)
- Play back from DAW
- Listen to the processed guitar signal nearly latency-free, including the parameter changes induced by the MIDI commands (e.g., listen to the guitar sound as if played with normal wah-wah + amp combination)
And then, after recording:
- Change the MIDI commands (e.g., correct wah-wah positions)
- Listen to the processed guitar signal (and/ or record it), including the parameter changes induced by the MIDI commands (e.g., listen to the guitar sound as if recorded with normal wah-wah + amp combination)

Regarding MIDI control, will POD Farm work like GearBox when the MIDI features have been implemented in the future?

I hope you can help and clarify these issues.

X3 Live is in total FreakOut Mode!

support@line6.com — Tue, 14 Apr 2009 14:46:32 GMT

I can't tell if I have a hardware (flaky button, twisty know, button) or soft/firm-ware issue. I *seems* to have appeared after a recent fw update, but can't be positive of that.

Symptoms:

Pressing BANK DOWN (bottom left footswitch button) should scroll to the next numbered sequence ( i.e. 21A --> 22A, etc). Nothing happens when I press it, as if the button is disabled (broken)

Patch shows on LCD screen, then flashes over to AMP/CAB page and 'virtual' knobs start spinning, as if possessed by a demonic MIDI controller (there are none, unless we have gone wireless and I missed the memo)

When it gets to *some* semblence of stablized...I might click the STOMP to engage the distortion. Double-tap to edit, takes me back to AMP/CAB screen again. Pressing RT-Arrow (on circle button) will take me back to Distortion page, but unless I immediately spin the selection dial, it falls back to the AMP/CAB screen. Buttons seem to only marginally function.

Is there a 'blow away the entire thing and set it back to the OLD OLD original factory settings, *inlcuding* old firmware, so that I can better pinpoint if this is a programmatic problem, or a physical hardware problem?

I have a gig tonight (Tuesday the 14th of April) If I can reset to factory -- if you think that will help -- I can get my patches rebuilt -- I've saved them all to my pc.

HELP!!!

Error: 10272

support@line6.com — Sat, 21 Nov 2009 20:25:07 GMT

Hi.

There was a problem sending your deposit request to iLok.　　（Error: 10272)

I confirmed the address on the site of ilok.

However, the problem cannot be solved.

Please teach how to do.

I'm sorry. I can speak English only a little.

An error occurred while processing your request.

How to run Ipod into HD147 for playing along with?

support@line6.com — Fri, 20 Nov 2009 20:54:02 GMT

Hi,

I am a new owner of the Line 6 HD147 and I was wondering if there were any suggestions on how to make an auxillary device such as an Ipod work with the HD147 in the same manner the 1/8" input does on the Spider series amps. I do not have a stereo for playback and always used the auxillary input on my old Spider III amp to play along with recordings, and I just became accustomed to this way of doing it. Any and all suggestions would be greatly appreciated on how to defeat this issue.

Thanks,

JAM

"Booting from SD-card..." - it doesn't work ..

support@line6.com — Thu, 02 Apr 2009 09:46:53 GMT

Hello,

I've got a problem with my JM4 Looper:

I wanted to upgrade the Firmware from 2.00 to the latest 2.09..

So i downloaded the update and put it on my SD card (I tried a Panasonic 2GB Class 4, and a hama 2GB Class 2; both were formattet correctly with FAT (def) in windows, the checksum on the SD was also correct).

So i got into the menu, selected "upgrade" and he cleared his memory and didn't accept the SDcard anymore ..

However, i tried again and again (also with other cards, few times formatted) and he tells me "booting from SD-Card" ..

Right now it stands there for over half an hour, and i can even remove the card without getting an error...

So what can i do?

Thanks for your attention,

regards,

Felix

/e: Having removed the SDcard from the JM4, the Line 6 Checksum Utility has an "Error reading input file" ...

POD X3 MIDI timed out messages 8000900C and 80007211

support@line6.com — Thu, 12 Mar 2009 19:26:59 GMT

I purchased a POD X3 as a present for my wife earlier this month and she has been happily using it since. On Saturday I updated it to the latest flash (1.21) using Line 6 Monkey which was successful, backed it up using Monkey, and used Gearbox to look at the presets.

However, today I have tried to connect Gearbox and I keep getting an 8000900C MIDI timed out message. So I started up Monkey and saw that the flash revision was "unknown" so I attempted to reflash it and got an 80007211 MIDI timed out message. I have then spent far too long trying to debug the problem.

So far I have tried Monkey and Gearbox:

- with and without the FBV connected

- with and without the POD in "Safe Mode"

- using all the different USB ports (4 of them) on my laptop running XP

- tried a different laptop running Vista

and *all* of these fail with the same messages. Yet it used to work or else I would not have been able to upgrade it to the 1.21 flash release.

What now? I *really* don't want to have to tell my wife that it has to go to the service centre when she has only just got it!

Thanks,

Simon

hey

support@line6.com — Fri, 20 Nov 2009 03:08:29 GMT

i installed Vyzex editor pocket pod to get new patch downloads and everytime i try to open it, it says that i need to put in a company and serial number and i am not quite sure on what it means

can you help me

from Michael

Toneport DI - Gold vs iLok, How can I select which license to use

support@line6.com — Sat, 21 Nov 2009 10:48:28 GMT

I own 3 PodFarm licenses (1xUx2, 1xTonport Gold, 1xiLok)

So the ilok version is the basic version, which i got when it was free, cause the toneport gold is annoying the hell out of me when traveling. Sadly I can't transfer my model packages to the ilok license.

But there's the horrible part: At home I have the toneport gold plugged in AND my ilok (due other licenses I need).

If I run PODFarm standalone I can get all my models (Gold). As soon as load the podfarm plugin in logic 9, it lists the iLok as authorized device. If I unplug the ilok it switches the DI-Gold, but as soon as I plug the ilok back in, it authorises of the ilok. (which reduces the number of amp models to min set)

So I need the ilok plugged for other purposes , but I still wanna use all the models.

How do I force the plug-in to the authorize of the dI-gold and let the ilok license in piece???

It is not helping if the pod farm plugin is automatically choosing the smallest license!

Or can I trade my basic ilok podfarm for ilok platinum and on the same token downgrade my DI-GOLD to silver - basically swap them ??

Studio GX

support@line6.com — Sat, 01 Aug 2009 12:16:42 GMT

Im Adam, and im planning to buy a studio GX interface. I am already using a guitar effects software (not line6) and im getting a very high latency (i plug my guitar straight into my motherboard's 'line in' ). If i buy a line6 usb interface, will i get a lower latency ? Because i belive if i play on a line6 usb thing, then that does the main processing, not my CPU . So i belive i will get lower latency then without a line6 interface, and just playing straight to the sound card. But im not sure, thats why im asking you about it.

thanks a lot

Pod Farm Platinum Realtime Effects Monitor? Recording Software Recomendation?

support@line6.com — Mon, 30 Mar 2009 17:44:44 GMT

Howdy do,

I own Pod Farm Platinum for iLok. Does anyone have any recomendations for recording software that will allow me send the signal into my Pod Farm Platinum and hear it before I record it? I currently own Acid Pro 6 and I have a copy of Acid Studio Pro7. It seems that I can only apply effects to a track that has been recorded. There doesn't seem to be a way to play my guitar and monitor the effects with my Pod Farm Platinum iLok activated software. I connect my guitar using a Line 6 Guitarport. I also own an Alesis Multimix Firewire mixing board. Using either of these I can her my signal, but when I activate my Pod Farm Plat Plug-in It's still a clean signal. Is there a way to actually hear Pod Farm Platinum effects realtime monitoring before I record? I am a rookie. =)

Or maybe that's just how Pod Farm Plat iLok works? You can use it to apply to tracks already recorded? Maybe Acid Studio 7 just doesn't have that feature and maybe I should use different recording software? Any recomendations or advice would be cool. I am new at this.

Thanks!

POD x3 pro and sonar 4 producer edition

support@line6.com — Sat, 21 Nov 2009 12:41:18 GMT

Alright, here's my problem!

I've installed sonar 4 on my pc. I ca record but i have no sound while recording and no sound when i playback the recording. My sound card is a Creative SB Audigy 4.

settings in sonar 4 are the following (see attached jpg).

Can anyone help me

2x12 4x12 missing on pod xt pro

support@line6.com — Sun, 22 Nov 2009 01:07:27 GMT

when i press the i/o dig i get to the page what are you connecting to and i cannot get the studio direct to change to 2x12 ,4x12 also the series fx loop and spdif digout are missing from the same page.

the firmware is version 3

do i have to set this to turn the mics and room components of air ?

and if i wanted to go back to an earlier wesion of the firmware how would i do this.

podfarm as a plugin

support@line6.com — Sat, 07 Nov 2009 19:58:08 GMT

hi, i recently had to format my HDD and reinstall all my music software. I was wondering how I go about using podfarm as a plugin again as I paid my license a while back but now dont seem to have the option to use podfarm as a plugin anymore after the reinstall

any advice will be great

Control An SV112 and Flextone IIIXL from a Single FBV Shortboard (IT LIVES!!!)

support@line6.com — Thu, 12 Mar 2009 17:07:08 GMT

I have one of these,

one of these

and one of these

Holy Crap! I can't control patch changes!That is most perturbing!

DING! [AhHa Moment] I have an idea...

So I went to Frys...I wonder what is in the bag....

Why it is an RJ45 8Y connector, of course>>>

hmmmm....Let's see...How can I get this thing open....[smash!!!]

THIS HAS BEEN EDITED...The picture is NOT correct...You must clip the wire on pin 8 also (white wire in the pic)
Now that it is open we need to clip wires attached to pins 1, 2, 3, 4, 5, 7 and 8...Yes, only 6 stays attached on one of the Y female RJ45s...hmmmm....

install the modified 8Y RJ45...booted blue runs to the FBV and the other (no boot) is running from the modified side to the Spider Valve 112...

So I call up 2a on my Shortboard...

Wow! That works...how about 2c?

The pictures above demonstrate using the two amps with the banks offset...You can acutally line up any bank to any bank which is you program you tones in a consistent mapping like A is always a clean tone, it opens up some possibilities...To line up the banks just navigate the SV to the bank the Flextone is on....This also works with a POD XT and there is no reason this should not work with an X3...

...Ok, looks like I will be moving some patches around after I rock out for a while...

podx3live

support@line6.com — Sat, 11 Apr 2009 18:32:38 GMT

My podx3live just started to toggle between patch and parameters.How do I stop this,I've tried the reset user preset but it still does the same thing.It will ack normal for while then it will toggle between the two screens.

HP laptop vs. POD Studio UX2

support@line6.com — Wed, 01 Apr 2009 01:05:19 GMT

Hey, I have a Line 6 POD Studio UX2, and also have a HP laptop. But everytime i got to use my UX2, theres big time glitches comming from my headphones. I tried everything that other people told me, and also what the manuels told me to do, i also called the support line, and still didnt help. So now im wondering if there something i can change in my computer, for it to not have any glitches sound? Because one of the guys told me from support is that POD studios dont work well with HP laptops, witch I find rediculouse, so any help would be awsome. Thanks.

Second owner guitar port online registration?

support@line6.com — Tue, 17 Nov 2009 04:15:00 GMT

Well i have put this on a few times and have been unavailable once i was contacted so i am gonna try it again. i have a guitar port that i was given and the original owner is not available to reset the serial number. Please someone set up a support ticket for me so i can finally get my name on this thing and update my programs. thanks

4 method cable with a Pod X3Live

support@line6.com — Thu, 30 Apr 2009 12:33:07 GMT

Hey,

What is this 4 method cable all about?

Can I use this and still use the amp simulations on the pod?

What should I change on the output mode?

My amp has fx loop, so I know that this is possible with my amp.

What are the pros & cons?

Inblut

DL4 delay pedal not turning on at all

support@line6.com — Wed, 22 Apr 2009 09:32:42 GMT

Hi I have just purchased this DL$ delay pedal 2 weeks ago and it was working fine and then i went to plug into the pedal today and nothing. I assumed the batteries were dead so i put brand new batteries in the DL4 and still nothing. I Have got my guitar lead pluged into the mono/L input and my amplifier plugged into the Mono/L output as i did last week but now nothing, no lights show up no delay effects or anything? Has anyone experienced the same problem>?

Use paypal?

support@line6.com — Thu, 09 Apr 2009 20:13:58 GMT

Model Packs.

POD Farm.

Can they be bought using Paypal?

Thanks.

What are the MIDI capabilities of POD Studio/TonePort gear?

support@line6.com — Tue, 04 Aug 2009 12:51:57 GMT

I can't find anything that'll tell me about the MIDI capabilities of POD Studio/TonePort equipment........could I use a POD Studio GX, UX1, UX2, KB37, or TonePort UX8 to replace a standard MIDI interface in a recording setup?

bass pod pro

support@line6.com — Fri, 20 Nov 2009 21:10:15 GMT

Which, if any, of the fbv series pedals will work with a bass pod pro rack unit. It is not the xt series. I am looking to add a pedal board to mine.

Voltage for podxt live

support@line6.com — Thu, 12 Mar 2009 16:47:45 GMT

the ac/dc power converter for my xt live says that it is rated for an input voltage of 100 volts. Is that right? Nothing is wired at 100 volts.

Update

support@line6.com — Thu, 19 Nov 2009 21:09:54 GMT

Hi guys, Im sure this has been answered a million times and so Im sorry to waste peoples time and the space on this forum.

Can some one direct me to a site in England that is selling the necessary cables to do the update ?

Thanks

Variax Les Paul Transplant Help

support@line6.com — Sun, 22 Mar 2009 05:21:57 GMT

Hi I am wanting to do a les paul transplant but want to use a 3 way switch instead of the 5 way to keep it looking original I know I will lose 2 positions. What 3 way switch will work for this the les paul switch will not work because the middle position turns position one and two on?

PODxt

support@line6.com — Sat, 21 Nov 2009 23:39:41 GMT

what free software download do I GET ? I JUST BOUGHT THE PODXT ANDWHAT I DOWNLOADED DIDN'T WORK AND HAD ISSUE WITH JAVA---AND MY JAVA IS UP TO DATE VERSION. ALSO I WANT TO STOP THE COMMUNITY MESSAGE AND DON'T REMEMBER HOW I TUNED IT ON. THANK YOU !

Spider Valve 112 Knobs

support@line6.com — Sun, 27 Sep 2009 02:36:31 GMT

I lost a few knobs on my spider valve 112. I know Line 6 can send you new knobs that just slide on but the whole shaft for my drive knob broke off. What is the contact info for the department of the company I need to contact and what advice can anyone provide on the broken shaft for the drive knob?

Gearbox tells me that my POD X3 needs updated but monkey does not have any available

support@line6.com — Mon, 19 Oct 2009 21:09:24 GMT

Hey guys,

i can use gearbox etc fine but every time i open it it says that i should run monkey to update it and when i do monkey doesnt show anything in the box on the update page.

How can i get this update or make the message go away if it is not one?

Thanks

Spider 4 question

support@line6.com — Wed, 04 Nov 2009 04:08:04 GMT

Is it possible to control gain with the pedal of the FVB shortboard MKll when writing patches for the Spider 4? Thanks

Mixing down to a wave file

support@line6.com — Tue, 10 Nov 2009 02:54:37 GMT

Everytime I try to mix down my song to a wave file I get a SD card write error. It won't transfer .JAM files either. I bought a new SD 2 gig card and formated it in my JM4 and still I can't write to it. I set the security tab so it is suppose to be writable. I even reset all the factory defaults and tried again to no avail...What am I doing wrong?

James Taylor

Line 6 DL4 - Problems

support@line6.com — Tue, 03 Nov 2009 13:14:24 GMT

Hey. I bought a Line 6 DL4 with the intent of doing something similar to this with it.

I used a Quarter Inch to 1/8th inch converter so I could hook up head phones to the Mono Left Output. All I hear is on the left side (this makes sense) and it is very quiet even with Mix capped out.I hooked it up to my surround sound and it is louder but still very quiet in relativity to how loud my stereo gets.

So I guess I have two questions.Is there anyway to increase the volume... and is there any cable that I can use that is Dual Quarter Inch Males to Mono Quarter Inch Female in the hopes that I can connect the two Left and Right Outputs into one mono cord and hook it up to headphones so I get sound in both ears?

Or is there any other way I should do this?

I'm just curious... Has anyone ever seen the X3L clip light?

support@line6.com — Wed, 29 Apr 2009 19:07:18 GMT

i have a really high gain patch in my X3L... and I'm sure I can hear a slight digital clipping going on... but my clip light doesn't come on...

so i know that there's certain FX's setups in my XT that used to sound like that and not show a clip light, whereas others would show the clip light... but the problem i have is that even if I turn up all the vol and gain knobs on an amp and stomp I can't get the clip light to show on my X3L.

I'm assuming it's broken, but does anyone know of an FX/amp combination on their X3 that will always get teh clip light on so I can test... I have high gain pickups in all my guitars so I have the power to clip... so to speak, lol

Cheers

Rowbi

Preamp In Question

support@line6.com — Sun, 22 Nov 2009 04:20:11 GMT

Ok I just got the SVHD100....What the heck is the preamp in for? Please tell me if what I wrote below is correct.

---- It is for inputting another amp's speaker out or direct out and using the SV's cabinet models????

Dual Tone switching (I can't hear Tone 2)

support@line6.com — Wed, 01 Apr 2009 20:04:21 GMT

Hello

I guess I'm doing something wrong, so please correct me ; )

anyway, my problem is - I can't hear the second tone. ever.

If I press the "Tone2" button, Tone 1 continues to play (for instance with a long reverb - which is great for me), but no sound at all comes when I select Tone 2!

This applies to all tones, including the factory defaults, so its not that I messed up with something ; )

I really need this, especially for delay. I set a very long delay on Tone 1 and would like to play a lead on top of it using a different preset.

Thanks

P.s. the dual tone feature works well when recording via usb, but I'd like to use it live with an amp as well

hi

support@line6.com — Sun, 08 Nov 2009 10:22:15 GMT

hi skystar 100 here ,would like to thank you for getting me thee info, on repairs to my line 6 AX2 212 AMP in Australia,will ring them tomorrow ,again thanks for the info.

Regards.Roy.

Does Pod Farm work with USB mixers or other interfaces?

support@line6.com — Sat, 14 Nov 2009 20:31:57 GMT

Hi, I was wondering if Pod Farm will work with USB mixers or other interfaces such as the M-audio fast track; or does it only work with Line 6 products?

Pod XT Live &Windows 7

support@line6.com — Sat, 21 Nov 2009 09:07:52 GMT

Hi everyone,

I'm just bought a new laptop with Windows 7 on it and I can't seem to connect via USB. I've pulled out my old Vista laptop and everything is fine so I've updated all the drivers (not sure if it updates drivers within the Pod) and still nothing.

All I'm getting is the 3 duh duh duh's, so it's not feeling the device at all.

If anyone can help, I'd be grateful.

Regards

Steve

Amp vs Line Switch

support@line6.com — Thu, 22 Oct 2009 18:57:12 GMT

I created all my tones while having the switch button on AMP (not Line)---and I was using an amp.

But I recently started reherasing going to a PA. I switched to Line and all my patches were clipping like hell/digital screeching.

What do u think is happening and what do u suggest?

thanks!

Installation Problems

support@line6.com — Sat, 21 Nov 2009 11:33:19 GMT

I have had 2 problems:

1. The following error message appears at install: "The system extension " / system / Library / Extensions / Line6Audio.kext" was installed improperly and cannot be used. Contact the product vendor for an update" I have attempted instal 4 times with the same result

2 The software does not detect the hardware. When the USB is connected a message appears: "You need to restart your computer hold down the power button.." On restarting the computer and reconnecting the USB the message is repeated.

my XDS95

support@line6.com — Sun, 22 Nov 2009 03:42:45 GMT

My family bring me a new XDS95，but when I open this, one part is gone!Threaded Input Jack Socket is gone! I am in Taiwan， Please help me to get this part, It should not be like this!

X3 patches

support@line6.com — Tue, 27 Oct 2009 01:15:37 GMT

I just bought the X3. I am on Apple with OSX 10.4.11. I am trying to download patches from the internet but when I download them as a ZIP files & they will not open.

This is a key feature for me. Lincoln Brewster has his patches available on his website under gear. I download the file as he specifies but I can't open it. I REALLY want to be able to download other peoples patches to help me with my sound.

What can I do?

Also, I HAVE downloaded Line 6 Monkey which is up to date ( and POD Farm as well).

Tube Tone Snobs...GRRRRR!

support@line6.com — Wed, 08 Apr 2009 13:15:49 GMT

I had time to kill yesterday after work before heading to a band meeting so I poked my head into the bigger music stores in town to post some ads (looking for a new lead player). One that I went to is a large, non-chain store that generally thinks they are the city's gift to the music community. All the guitars bear tags that say "Do not touch - ask for assistance". Even the cheaper ones. Forget about playing a real LP or PRS unless you can demonstrate you have cash in hand. Piles of various lines of amplifiers are arranged in the center of the store: Mesa, Dr Z, 65 Amps...get the picture? Fender and Marshall are reserved small space next to the solid state Crates. None of the amps are being demonstrated. I almost never go there and nobody at the store knows me.

Anyway, a pretty nice sales dude (rare for this store) struck up a conversation over pedals and I wanted to try some out. Unfortunately they were out of stock on the two I'd like to try. During our talk, he asked what kind of amp I play through. Uh oh...here we go. I told him I have a Spider Valve HD100 and 112 combo. His response was along the lines of "yeah, those are pretty good starter amps, but not nearly the same quality or tone as a Mesa." I allowed that sure, you're not going to get Mesa quality from something costing so little.

He then told me that "those new Bogner amps from Line6 are pretty cool, though." Okay, dude...the Bogner amps ARE the Spider Valves. Oh really? Yeah, well, still, I don't think I'd be using something with a DSP in it in a live situation. And while he's saying this, he is walking me toward the door of the shop. He leaves me at the exit, but I've still got time to kill. So I say goodbye to him and amble back toward the amp section to check out some of the more obscure offerings they have.

Manager comes over to ask me if I need help. Nope, just browsing. Cool amp lineup you have here. Yeah, he says, we try. What kind of amp do you have now? Oh boy, here we go again. I have the head and combo versions of the Bogner/Line6 collaboration. Oh, he says, cool stuff. But if you're looking to get out of the bedroom and onto the stage then you really need something from Mesa.

This is where I almost lose my cool. Almost. I said, well, I haven't played in my bedroom for about 25 years now. And I already do play many of the larger stages in the tri-city area. And again, I find myself being walked to the front door. He says, yeah that's cool, I guess. Well, have a nice day...and I'm at the front door again.

WTF???

Multiple guitars and X2 series

support@line6.com — Thu, 05 Nov 2009 00:46:12 GMT

I hope to get a Line 6 wireless unit for Xmas. I was wondering what you do when you have to switch guitars?

Is the unit clipped to your belt so that you just unplug the guitar you're wearing, strap on the new guitar and plug in?

I mean you don't have to buy a body pack for every guitar do you?

Benee

XDR95 wireless bodypack

support@line6.com — Sat, 07 Nov 2009 17:27:18 GMT

Hi,

I've managed to break the bodypack for my rack XDR95. Can I buy another from anywhere eventhough they're now discontinued? I'm in the UK.

Regards,

John

UX2 recording

support@line6.com — Tue, 17 Nov 2009 12:16:31 GMT

I recently bouhgt an UX 2 from someone else.

I wanna record 3-4 instruments at once an than also that recording goes to seperate channels.

I didn't get the Ableton application or do I have to download this.

Thanks for answering.

R. van de Velde

Netherlands

Tuning down half a step?

support@line6.com — Mon, 16 Nov 2009 11:09:14 GMT

Can someone help me. I have an X3 Live and need to tune down half a step for my next practice session. From memory, the X3 Live only seems to have major notes ie E A G B D E and i need these to be Eflat, Aflat etc.

Anyone know how to do this? i am sure that this is really easy and i am missing something but for the life of me i cant work it out.

Thanks

Lee

Variax 500 will not "hold" default models

support@line6.com — Thu, 05 Nov 2009 00:36:54 GMT

I have a variax 500 that I can't get to hold (or save) the default models. I tried to put it back to the original factory models via workbench and I can see the original defaults but as soon as I disconect the system they all go away and the guitar sounds the same on every selection. I reconnect it to the workbench and see that they are all gone (no models on any of the settings). Ideas anyone? Am I doing something wrong? I'm new to both the variax and this software, so it's a good possibility that it's just something I'm missing..................

Pod 2.0 - Noise every time "Tap(Hold)" button flashes

support@line6.com — Wed, 04 Nov 2009 13:42:14 GMT

Hi, just a quick question. When the "Tap(Hold)" button flashes, there is a pulsing noise with each flash. Is there a way to eliminate that sound? The POD Version 2.0 has been great in the studio apart from that noise that is very distracting during quiet parts, so much so, that it makes the unit unusable. Thanks in advance for the reply and, hopefully, the solution.

Sincerely,

Pod xt to ILOCK

support@line6.com — Thu, 28 May 2009 09:36:06 GMT

Hello guys

I just bought podfarm to use at the side of my pod xt.

I wonder can i transfer the activation done from my pod xt to an ilock?

i want to do this so i can have the pod xt on the road and have the ilock for podfarm when recording.

// Jesper

No Sound: RD-700GX Balanced Out + UX8

support@line6.com — Tue, 12 May 2009 01:12:19 GMT

Hello,

I'm using an RD-700GX and am receiving a VERY faint sound when I put the 2 XLR's (Balanced Out) into my UX8 (in any set of inputs).

I can hear things when I put my other instruments (bass, vox) running through my UX8.

I've tried multiple cables with no luck.

Any ideas?

Chris

Toneport UX2 and Expression Pedal

support@line6.com — Sun, 17 May 2009 23:53:17 GMT

I have read enough negative reviews on the EX-1 to sway me from wanting to purchase it for use with my Toneport UX2.

Is the Toneport UX2 compatible with other expression pedals on the market? If so, can you provide a recommendation of a specific pedal known to work with the Toneport UX2 hardware?

Thanks!

Unwanted noise gate

support@line6.com — Sat, 03 Oct 2009 19:13:07 GMT

The Tweed and Blackface amp models seem to include a noise gate which cuts off notes instead of letting them ring on. I play instrumentals using these clean amp models and find the notes cutting off prematurely most frustrating.

I can find no way of adjusting the noise gate to eliminate this effect. I do not use overdrive / distortion so have no need to use a noise gate.

Has anyone else found this effect? Does anyone know how to eliminate it?

Thanks

Vetta HD 1 vs. 2 cabinets: speakers comparison

support@line6.com — Thu, 09 Jul 2009 06:39:11 GMT

why the cabinet relative to Vetta1 HD has Custom Celestion speakers while the Vetta2 HD relative one has V30s? is there any difference in sound generation between the two heads to justify that? if yes, this difference can be overcome with the update? when using the V30s loaded cabinet you still allow CAB/A.I.R. emulation or bypass it to get the full potential out of the V30s?

i'm about buying a 2nd hand Vetta1 HD and i'd like to know if my 2x12" Celestion Classic Lead cabinet is "rubbish"...

thanx, bye

Upgrade to 3.01 - Can not find new wah and amp models

support@line6.com — Sun, 08 Nov 2009 22:14:03 GMT

I've just reflash memory in my PodXt live, in order to get this list of news features in version 3.0, but at the end of the upgrade, I cannot find them inside my Pod. ? I've tried to upgade from a file, directly from the server, erasing my old patches but never reach to see this new features. Some help?

By the way, no problem with midi connection, no problem with Line 6 Edit even Monkey.

Thanks!

STOMPBOX EFFECT MODELS:

Bass Overdrive (based on* Sans Amp Bass Driver)
Bronze Master (based on* Maestro® Bass Brassmaster)
Bender (pitch bend effect)
Sub Octaves (synth effect)

SELECTABLE WAH MODELS BASED ON*:

Vox® V847
Custom Vox® V847
Colorsound® Wah-Fuzz
Maestro® Boomerang
Cry Baby Super – Jen Electronics
RMC Real McCoy 1
Arbiter® Cry Baby

AMP MODELS BASED ON*:

Marshall® 1974X (18W Reissue)
Marshall® JCM 2000
Orange AD30TC
Vox® Fawn Non-Top Boost AC30
Dumble® Clean (from POD® 2.0)
Soldano SP88 (from POD 2.0)

Vetta2 HD Stereo Chorus settings for lead sound

support@line6.com — Thu, 05 Nov 2009 10:41:05 GMT

has stereo chorus effect something to do with the lead parts of this (http://www.youtube.com/watch?v=Bvvl7WwxM9g) song?

if yes: how to set mix/depth/rate/pre-delay/feedback to get nearer to the lead sound above?!?

thanx

Problem getting flash drive update on vetta II combo

support@line6.com — Thu, 09 Apr 2009 20:09:30 GMT

I have a m-audio uno MIDI interface cable with the latest drive version (5.2.3.016) for windows xp, the problem is I have tried numerous times to update the flash drive on my amp but when I get to the part where it is complete I hit the save button and nothing happens, I then power the amp off the on, still a blank screen. I have tried everything I can find on the web and everything else I can think of, Please if anyone has any ideas please let me know I am very frusterated that I can't play my amp... Thank You.

Strings / Keys & Misc Effects

support@line6.com — Fri, 17 Apr 2009 15:09:48 GMT

Does anyone know how to get good strings or keys sounding effects out of the x3 live? I tried the one strings effect and it doesn't sound good. I want to sound more like a violin. As far as keys go, it would be nice to have an effect that comes close so that some keys riffs could be incorporated into lead parts. As a general note, I really haven't found any use in any of these effects, and any comments on how you use them would be much appreciated! :

76. L6 Clean Sweep
77. L6 Seizmik Synth
78. L6 Double Bass
79. L6 Buzz Wave
80. L6 Rez Synth
81. L6 Saturn 5 Ring Mod
82. L6 Synth FX
83. L6 Synth Harmony
90. L6 Hi-Talk
91. L6 Sweeper
92. L6 POD Purple X
93. L6 Random Sample and Hold
94. L6 Tape Eater
95. L6 Warble-matic

I hope this isn't a RTFM kinda thing...

support@line6.com — Mon, 13 Apr 2009 13:07:28 GMT

Anyone have an issue like this? I make a tone I like on my X3 and connect the thing to the computer, open Gearbox and in the Hardware Memory screen when I try and select it, the F*in name and settings changes??? Things turn red, nothing saves right??? Help???

UX1 Recording Acoustic

support@line6.com — Tue, 17 Nov 2009 02:56:14 GMT

Hello,

I have recorded with my acoustic using the 1/4 inch standard input but it sounds rather electonic.. I'm not sure if it's the pickup which is a piezo or if there is a better way to record. My Strat sounds great though with no issues there.. Can I use a mic in the xlr port or can I use an acoustic directly connected using an xlr output? What type of mic would be recommended? Also I see that the UX1 does not supply phantom power can a separate power supply be used? Any info on this would be appreciated.

Thanks,

Bob

Spider valve Mk II Cabinet Modeling?

support@line6.com — Fri, 20 Nov 2009 16:23:14 GMT

I'm thinking about getting the Spider Valve Mk II HD, but I won't be getting the line cab with V30's to go with the head. Does the SV mkii model cabinet sounds like many of the other line 6 products. I own (or have owned) the Flextone III XL ( which as a wonderful combo!), Vetta II, HD147, and the spider II. I hope it does not model cabs. I have had problems with the Vetta II and HD147 not sounding great with my two genz-benz g-flex cabs (even when I turn the cab models off).

pod farm platinum activation

support@line6.com — Wed, 18 Nov 2009 01:59:41 GMT

Hi line 6

I already have Pod Ux2 studio.

I bought Pod Farm Platinum and an ilok Usb Key.

I've registrated the program on web site, i've activated the ilok license and download it in the key.

I tried to open Pod farm Platinum with ilok plugged in but the program that run it's the normal Pod farm.

I'm sure that i missed a step.

Please show me what do i have to do for activate Pod farm Platinum.

Kind regards

Stefano

I am trying to register my spider111 15

support@line6.com — Sat, 07 Nov 2009 01:50:00 GMT

they said to many #

pocket pod install problems windows xp

support@line6.com — Fri, 20 Nov 2009 16:07:03 GMT

When I connect my pocket pod windows says found new hardware line 6 but then says it can't install.

Also I have installed line 6 monkey but when it starts up it does not list pocket pod in the hardware list.

How do I resolve?

Thanks

Presets

support@line6.com — Wed, 10 Jun 2009 01:34:04 GMT

I recently bought a Spider Valve 212. I honestly bought it strictly for the Cliffs of Dover preset. As soon as I bought it and got it home I saved the preset in the memory bank. Today I tried to make sure that the setting hadn't been changed so I compared the original preset location to what was saved in the channel.

The orginal present in the 90's memory bank no longer showed 'delay' as being an effect in the tone, instead the 'tape echo' lights up. It sounds nothing like the original setting.

I tried doing a factory reset and that just cleared out the channels where I had things saved, meaning I lost the Cliffs of Dover settings saved in the channel bank.

I really need that setting back in my amp.

Please tell me how this could have happened, and how to get it back.

Thank you very much,

Ben

When i turn up volume pots (master and tone), sound is getting distortion!?

support@line6.com — Mon, 29 Jun 2009 12:30:10 GMT

I'm sorry for my bad english. I'll try to tell my problem.

I have pod x3 live. I use pod x3 with 5+1 sound system and 15w marshall amp. I downoaded a few samples from customtone. Those are very high gained and overdrived distortion tones (one of them is "Pantera" tone).

And.. my problem....

Firstable, i have to seperate this.. Distortion1 : this is what we want. The good distortion. We pay for this a lot of money..

Distortion2 : This is Bad! This is czzzzzz This is rustle....

Tone volume and master volume pot is on 4 (I mean 12 o'clock or North, ok?) - The sound is okay. Great distortion (distortion1)

But i turn it up. Tone volume and master volume is full. (last level) - The sound is distorted. (distortion2)

I know these.. The problem certainly not come from Soundsystem or amp. I tried every combinations. The problem is on pod.

I'm asking this. "Is this normal?" When i use very high gain samples, it's must be happen? Are all pods doing this or is my pod broken?

I hope, I could tell..

licencia para riffworks

support@line6.com — Wed, 04 Nov 2009 03:03:45 GMT

tengo un problema, como soy nuevo en esto no se que hacer, tengo una pod x3 live y ya tengo todos los programas instalados, pero el riffworksline6 edition me pide una licencia y no la tengo, ¿ hay que comprarla o puedo realizar mis grabaciones en demo mode? gracias por su pronta respuesta

JM4 Stereo wav files?????????

support@line6.com — Wed, 14 Oct 2009 20:08:40 GMT

Well I feel a little short changed!!! I've just spent the last three weeks reviewing all the various loop pedals (Boss, Digitech, Eventide etc)
and came to the conclusion that nothing came close to the Line 6 JM4. The overiding factor which made me purchase it, was the fact that you could play WAV files on the unit which meant that I could import work from my PC and use it live. However, when I tried to play the WAV files the unit tells me that it will only

play stereo files. I really think this is something that should should have been documented in the various documentation distributed regarding your product.

I really dont see the point of having SD capability only to sacrifice stereo functions. Can I ask if I can expect a firmware upgrade to change this?ed

If not I'll have to sell my JM4 (which is a shame because its so good) and go back to the drawing board.

A dissapointed JM4 fan

Brad

Spider 3

support@line6.com — Sat, 28 Mar 2009 12:54:38 GMT

Is there programing updates on artist and amp models for the spider 3 amp?

New POD X3 Live - presets seem corrupt

support@line6.com — Thu, 26 Mar 2009 12:45:20 GMT

When the POD X3 Live came out a year ago, I was one of the first to buy it. Back then, I had issues where in the middle of a live performance, it would simply stop producing audio, so I returned it and stuck with my former setup for the past year. With pedals starting to wear out and amps not getting any lighter, I decided to give the X3 Live another shot. After getting the outputs set up and levels set, I began running through the presets. It appears that I'm getting some digital-sounding noises on most tones that use modulation effects. The firmware was at 1.15 when I got the unit, and through the Mac OS X version of Monkey, I flashed it up to 1.21 and updated to the latest drivers. This did not change the issue.

I've hread that there is a chance I will need to re-flash to 1.0 and then back to 1.21 to resolve this. Is that correct, or am i looking at something else going wrong here?

Thanks for your help,

-Brian

Help! Having trouble with the XLR outs on a SV Mk II 212

support@line6.com — Mon, 09 Nov 2009 01:00:26 GMT

All,

So far, I love the Spider Valve MkII 212. I'm not getting the vibration issue in the 212 like people are seeing with the 112, but... I am having a problem. Because the amp and cab are VERY bass heavy, my patches typically have the bass turned WAY down. The problem is, the XLR outs now sound like @#%$#@$%. WAY too thin as to what I am hearing out of the front of the amp. I don't mind mic'ing the speakers, but I would like to use the line out so that I can use the master volume as my stage volume and not trouble the sound guy.

Any ideas?

Need help with AX2 212 unresponsive wah problem

support@line6.com — Tue, 05 May 2009 19:42:38 GMT

My wah has become unresponsive on my AX2 212. It comes on, but the pedal does not change the frequency of the wah.

There was a thread in the old forums that identified the possible fix and the part I needed to change out (an 8 bit converter I believe) according to Lemmie who helped everyone out.

It was a simple swap out of this specific A/D converter I think in the amp head.

Of course we can not access the old archived forums from last year the last I checked so I lost the specific instructions about the procedure and part to replace to try and fix this. Not happy when I came back here and saw the new forums with all previous data destroyed.

Does anyone know what part this might be and where it is located in the head?

The amp works fine otherwise-all patches without a wah are fine.

The volume pedal works fine.

Any help is appreciated. I know Lemmie headed for the hills after the forum change so am wondering if anyone else knows what this part replacement is.

It seemed pretty common.

I do not suppose there is a way to now access the old archived forums is there?

There was not a couple months ago. Pretty surprising that Line 6 would make the switch and dump years of knowledge.

Spider valve MkII and the spider IV criticisms and great amp musings.

support@line6.com — Fri, 14 Aug 2009 11:37:23 GMT

Ive been thinking about these and all the info ive seen on them looks, "Too good to be true".

Firstly the spider valve was always a good amp in theory. But as i found with the first, the sheer amount of processing inside the amp made it sound closer to solid state rather then the valve. Also, more on valves, if they truly wanted a flexible valve modeling amp, i dont think 6L6s for the power stage was a great choice, well by themselves atleast. Look a mesa road king (Or just about most of the mesa amps) they utilise both 6l6s and EL34s to give a more versatile sound, and imagine that, when programing your presents you can actually change the combination of type of valve being used. (I shouldnt give ideas like that for free!) however, theres no info i can find on the type of valve being used in the MK II so we could see something like this. (Mind you it probably would have been boasted about by line 6 if they did it).

Now then the spider IV i feel is just another bedroom guitarist amp, im sorry if thats a bit bitter but i do feel like they're they're beating a dead horse. Its just a bit updated and thats it, i thought it would have been better to focus on something more groundbreaking but hey ho, its probably their most profitable line so it does make sence for them to keep making them

In conclusion:

I dont want to seem bad this and bad that, but i would love to be proven wrong (By both amps) but just like the first spider valve which was, "over hyped" the MK II i have the feeling will have the same effect and as for the spider IV, i think its not gonna be anything, "Earth shattering".

In my opinion line 6 (If they want to make an insane valve amp) should start from the bottom up, find a great combination of pre amp tubes and power tubes then add some unique features, Such as the preset controllable valve changes i mentioned earlier, so i'll give you a good example to drive the point home.

Lets say we're making a 2x12 combo, with 3 12Ax7 for the preamp, 1 L6L GC, 1 EL34 and 1 EL84 for the power section. Now then, right there we already have something thats a lot different with three types of valve in that we will be able to assign to channels. Now, add say, a spring reverb on there, then MM4 modulations and an analog delay exactly after the preamp. Now, to take the heat up more, since theres already a valve switching system, why not be able to use two together in stereo. so there we've got three things thats not seen before in a valve amp, or very rare. Valve switching via a controller, three types of valve for ultimate versatility and stereo in a valve amp which is very rare. However its important that each part of the amp is kept as seperate as possible so not to make it sound too processed. I make it sound easy but its probably alot harder then i make out.

Love line 6, they go alot further then most companies which are afraid to step out of their own skin.

Please help!! POD X3 Live Issue!!

support@line6.com — Fri, 10 Jul 2009 21:50:41 GMT

ok so I traded my POD xt Live for a POD x3 Live.....I get it home and load a tone into a user patch 32A-tone 1 then save it and it works fine....then I create a sound for patch 32A-tone 2 and save it and every tone 2 in the whole unit is named that and and set as that......and when I switch back and forth it may or may not load the patch right....can anyone tell me what the deal is or more importantly what the fix is.....did I get screwed?? please help I need it to work very badly.....also I just tried to create a patch in 32B and when I finished i switched to another patch and back and it was gone.....what am I doing wrong??

DL 4 not saving multi-head preset.

support@line6.com — Sun, 07 Jun 2009 20:49:29 GMT

Hi!

My DL 4 won't recall my multi-head presets. Though, if I have the expression pedal hooked up, it kind of snaps out of it, and 'remembers' what I had stored. The pedal is bought used, and is an old version, v1.6. Is there a way of updating the software somewhere? Could this take care of the problem?

Thanks,

Jonah

FlextoneII plus

support@line6.com — Fri, 27 Mar 2009 18:33:00 GMT

I can't seem to find the answer I am looking for! Is the standard guitar input a stereo input or a mono input? I have a stereo guitar and was wondering.

I would appreciate an answer!

Thanks in advance for your responses!

Scott

greatscott2005@comcast.net

No Sound: Toneport DI-G

support@line6.com — Wed, 19 Aug 2009 19:33:00 GMT

Hello,

I have recently purchased a new Toneport DI-Gold. The program opens up and installs just fine, but when I proceed to plug in my guitar (which works on other amplifiers), I hear no sound. My guitar cord is brand new as well. I have installed all the latest drivers for the program, and done every update Line6 Monkey has to offer. I have checked to make sure that the USB drives are functional, as well as making sure the gearbox is using the sound card on my laptop for playback. My gear is registered, I have looked at threads for help, I have extensively read the PDF (though I may have missed something), and I am out of ideas. I have checked everything I can think of: my sound works, my headphones (should I choose to use them) work, and everything seems completely functional with the toneport. I am even considering setting it as my default speaker and buying a headphone adapter (size 1/4 inch) so I can plug into the toneport and listen directly from there. However, I don't want to have to do that.

I also feel it is important to let you know that the GearBox indeed detects my guitar: When I strum a note, it shows up on the meter, as well as on the tuner.

After running a compatibility check, everything passes but:

- the chipset (it says I may have limited privelages, but I doubt that means no sound)

- My processor, Intel(R) DuoCore P6800 @ 2.4GHz (I read from one of your support threads that I need not put too much weight on what the monkey says)

- Drive DMA mode (Apparently mine is in PIO, but I don't know how to change it. Perhaps the problem?)

I may be able to take into a different room and use it with a desktop for troubleshooting's sake, but it cannot stay there.

I am using a 2 month old dell laptop, with 32-bit version of vista.

Thanks,

Steve

POD Farm "Platinum" license for used POD X3

support@line6.com — Fri, 20 Nov 2009 17:56:31 GMT

I just got my first POD X3 from craigslist ( pod x3 and power supply only) and I'm newbie in this forum.

I installed all latest and greatest SW using Line6 monkey utility and basically I'm in a learning process.

The question is about POD Farm - looks like I'm having not a full version ( "Platinum" I beleive) which suppose to be compatible with my POD X3.

Is there any procedure how to re-activate ot obtain the license for POD Farm Platinum ?

Thanks much!

what do i need to access my ux2 on 2 pcs.

support@line6.com — Fri, 06 Nov 2009 14:27:31 GMT

I split my time between a desktop at home & my laptop when away. I want to use mu newly acquired ux2 & software on both of these

machines. Is this possible & if so, what do i need in addition to my ux2 & supplied software

how to handle riffworks

support@line6.com — Thu, 23 Apr 2009 15:48:38 GMT

I own Guitar Port Rifftracker for several years now.

After a period of trying to work with Riffworks, I gave up. I'm not the youngest user and like many others of my generation

I have many difficulties in managing digital programmes.

There was no user manual, the help of the Dutch importer was VERY friendly but much too fast for me.

So I closed the case, there was more to do in life than Riffworks!!

This week I made a re-start. Installed Riffworks for the second time and tried to climb the mountain again.

But how dissappointing this is........................

Isn't there any SIMPLE, STEP-BY-STEP method to learn how to do the most basic things?????

How to build a song with different riffs, how to save such a song, how to drag it to a cd etc.etc.

I tried "click here to see the overview movie" in Riffworks HELP but there isn't any audio...............HELP!!!!!!!!!!!!!!!!!!!!!!!

robart_mulder@hotmail.com

Support Ticket: no respons

support@line6.com — Mon, 23 Mar 2009 22:00:00 GMT

Dear Line6,

A support ticket was opened for me over a month ago and I haven't had a respons up to now. When can I expect an answer?

Regards,

Rene

How to avoid preset sounds fighting with manual settings on Spider Jam?

support@line6.com — Tue, 21 Apr 2009 21:45:53 GMT

Hi 6-Liners!

If I turn the "Amp Models" button the amp will choose preset sounds with every little turn. Even if the "Chan Vol" button is set very low (or even at minimum) the actual volume might be quite loud, depending on the preset. If I then turn the "Chan Vol" button only slightly it will take over the volume control and the guitar volume might drop as a stone. Quite irritating if you are in the middle of something! I want to have the "Amp Models" working as a manual tone control so it only changes the sound and not the volume. I have set "Fx Auto Select" to "Off" but it doesn't change a thing. Have I missed a point somewhere or is the amp playing games with me? Thanks for your help!

ecc83s or ecc803s ????

support@line6.com — Sat, 21 Nov 2009 20:23:52 GMT

hi all,im gonna change the pre amp tubes in my mk1.i was looking at the jjs.does anybody know what the difference in the two are?or what are the prefered tubes.i also have the sv pre and the bass mod,which i like alot(thanks mtrash)....anyway, just looking for some opinions by some of you more experienced dudes

thanks

backtrack + mic playback

support@line6.com — Tue, 03 Nov 2009 21:48:25 GMT

my backtrack will not playback (light is flashing green).

POD Farm Plugin Audio Cuts In/Out When I Edit- But Works Otherwise???

support@line6.com — Tue, 17 Nov 2009 19:13:38 GMT

I have a registered POD XT Live, which I use (as a dongle, effectively) with the basic POD Farm, which was a free download in September. When I instantiate the plugin inside Cubase (4.52), all is well. The sound is fine and works as it should.

THE PROBLEM: When I open the POD Farm Plugin GUI to change an amp tone, or otherwise edit the sound, I get audio dropouts lasting several seconds at a whack, interspersed with an occasional (brief) bit of sound. It makes editing the tone virtually impossible. Once I close the GUI, the plugin works fine again.

THE SYSTEM: It's a Quad Core AMD 2.8 w 4 gigs of RAM. I have Guitar Rig 3 and a few other amp sims that work perfectly at the 256 buffer setting I use. The size of the project doesn't matter, I get this problem even if it's the only track in the project.I also have a UAD Duo and Liquid Mix, which both operate without issues. Bottom line is that the system is brutally powerful and this is the only glitch. I have uninstalled/reinstalled the POD Farm, as well as all of the other drivers.

I would really appreciate a fix for this, as I'm very pleased with the sound of the POD Farm and would like to be able to rely on it. As it sits, it's worthless. Please help.

I tryed to activate pod farm platinum but I can't did it

support@line6.com — Tue, 17 Nov 2009 19:06:19 GMT

I already have Pod studio Ux2.I bought Pod farm Platinum, I bought Ilok Usb key, I activated the program on web site, i download it on my ilok the license, I download pod farm from line6, I tried to open it with the usb key, but the pod farm that i opened was the normal pod farm. What do I have to do for pod farm platinum? Please help me!

Kind regards

Stefano from Italy

Lowdown as monitor

support@line6.com — Thu, 21 May 2009 06:54:07 GMT

Hi there!

I bought a lowdown 150 combo. I need much power so I decided to use it as monitor. Can I connect de direct XLR output to another bass head, or it can only be connected to a PA Mixer?. Are there any options to use the lowdown as monitor with other bass cabinets?.
Tanks a lot,
Felix

How can I get an iLock?

support@line6.com — Tue, 22 Sep 2009 15:32:26 GMT

I have a Toneport UX1 that I only use to authorize PODFarm these days. I use another interface so it's, effectively just a REALLY big iLock. I sure would like to get an actual iLock for convenience. Is this possible? Can I get the device somehow and transfer all the stuff I already have in the TonePort?

Thanks in advance,

Greg

"There on no MIDI IN Ports selected" when start in Vyzex Editor

support@line6.com — Sat, 28 Mar 2009 22:19:24 GMT

I just bought my pocket Pod today and downloaded and installed VyzexPocketPOD1p05Setup.zip. When I plug my PocketPOD into my laptop I get the windows message about finding new hardware and it being intalled ok. However, when I start the Vyzex Editor I get the dialog "There are no MIDI IN ports selected! ..... " and the editor does not find the pocket pod.

I have a Dell Inspiron 9400 with Windows XP professional version 2002 service pack 2.

This sounds like the same problem as posted by quicklan " 'Error message "AutoSense could not find the line 6 Pocket POD"' in Vyzex Editor".

I would be grateful for your assistance.

How do I get Pod Farm and then How do I use it with my Pod X3 and Propellerhead Record?

support@line6.com — Fri, 06 Nov 2009 17:22:20 GMT

Hi,

I recently bought a POD X3 specifically for the job of enhancing the Line 6 amp devices in Propellerhead Record. Various documents state that a free version of POD Farm can be downloaded if you own a Line 6 hardware device and that this can be used to create presets for the Line 6 units in Record. I managed to download POD Farm but I never got it to recognize my POD X3. Since then I have upgraded to Windows 7 and have lost the setup file.

Now when I visit Line 6 website there no longer seems to be a free version of Pod Farm to download.

This is all getting very complicated so please would someone from Line 6 post a step by step guide of how to use Line 6 hardware with Record and what we can expect to do with the Hardware and the various versions of the Pod Farm Software, (protected and not protected) and would it be possible for both Line 6 and the partners that they licensed their technology to i.e. Propellerhead to get their heads together and create a straightforward advertising policy so when we buy these products then we know what can be done with them?

Thanks

Jonny

A few ideas for the X3, what's everyone think?

support@line6.com — Tue, 28 Jul 2009 19:10:21 GMT

I've been using the POD X3 for a few months now, and I have some ideas/suggestions for new features on the X3 and I was just curious what everyone thought of them.

1) When you have a dual tone, it would be nice if there was some way you could activate an effect for both tones at once. For example, if I have a dual tone, but I want the rotary drum to start on them both at the same time, it's impossible to do since I have to press mod, go to the second tone and then press mod there. Maybe this could be accomplished by pressing mod and tap at the same time, or stomp/verb/delay/the on off button at the same time as tap for whatever you want to activate. Of course, it doesn't have to be the same effect... like if someone wanted to have a phaser and a rotary drum, or an octaver and a distortion activated at the same time on the dual tones. For something like the X3L, maybe pressing the button on the board and holding it for a second could work.

2) Sometimes when artists record, they use more than one microphone. It would be cool if there was a way to add more than one microphone to a tone and place them at different distances. This could possibly be accomplished on the amp page of the X3, where on the second row and possibly a third if required (Maybe differently, I don't have my POD in front of me ATM. But, just to give a general idea...) it would say Mic 1 Type, Mic 1 Room, Mic 2 On/Off, Mic 2 Type, Mic 2 Room, Mic 3 On/Off, Mic 3 Type, Mic 3 Room, etc. In Gearbox, show all the mics with the disbled ones greyed out. And then click on a mic to select it, and then press a button where you select the mic type to turn mics 2/3/etc on or off. And then move the mics back and forth by dragging them as usual. Or, select mic 1/2/3 via a dropdown menu since they might be all cluttered together, and someone might accidentally click on and edit the wrong mic.

I also have some more ideas, but I'll post them later.

Anyways, just my suggestions/ideas for L6. I know that there is other higher priorities for POD Bug Updates, but just some ideas for later on down the road.

Let me know what you think!

Floor Pod Problem

support@line6.com — Sat, 11 Apr 2009 02:21:44 GMT

Sometimes my floor pod would be working normally, and then suddenly go into a soft, muffled tone without any changes being made to the settings. This isn't just for an individual preset, even when i change patches the problem still persists. In clean patches there is virutally no sound. When i turn off the power to the floor pod and turn it back on again the sound reverts back to normal.

Is this a problem with my unit?

POD Studio UX2 - Crackes & Pops

support@line6.com — Wed, 04 Nov 2009 14:00:08 GMT

I've just recently bouth the UX2, I installed all the drivers and such from your website and whenever I open it up with POD Farm or Gearbox all I get is crackles and pops. Help please?

PodXT Live and POD Farm

support@line6.com — Fri, 20 Nov 2009 21:17:59 GMT

I have a PodXT Live. If I purchase the POD Farm upgrade for my unit ($49), this should provide me with some bass amp models and cabs (5 each I believe). My question is: are these new bass amp models available to me when I am not hooked up to the computer and Pod Farm? While I may indeed use PodFarm from time to time for recording with Riffworks, etc, I am looking at this as a means to get a few bass amp models on my Pod XT Live without having to spend $99 for the bass expansion pack.

In short: I want to be able to use the bass amp models provided via the Pod Farm upgrade in a live situation, without any link to Pod Farm.

Thoughts?

Return Process

support@line6.com — Sat, 21 Nov 2009 17:39:24 GMT

Hi can I cancel the return of my credit for the Classic Collector package that I've returned so I can use it to purchase the FX Junkie instead, I'm sorry I know it is my fault, but I will greatly appreciate if you can assist me with this. I will like to use that money to purchase the other package. Thanks, I have a podxt,Spider IV 120, and a FBV shortboard, and let me tell you those devices are great!Please help!!

UX2 Tone Port with Pod Farm and Logic 9.01

support@line6.com — Thu, 19 Nov 2009 18:44:47 GMT

I have a couple issues with the UX2 on my Imac.

Monkey tells me that i have all the current drivers etc.

1) Although it works for the most part,

When opening Pod Farm as a stand alone, I always have to choose the UX2 if I start Pod Farm where it used to be able to find it.

2) If possible, How can i get the UX2 to record two inputs at the same time, on seperate tracks in logic 9 ?

for example: Mic 1 and Inst 1 (Gear box seemed to offer this, although I never tried it)

3) Is it possible yet to choose the UX2 inputs within the logic as the host app?

Thanks, Todd

GPO Renewal Without My Consent - cancelled and still no refund

support@line6.com — Wed, 18 Nov 2009 17:24:50 GMT

Hi,

I can't believe there is no way to just email support. I have to post this in a forum?

In any case, I see that you charged my credit card $79.99 for what I am assuming is a renewal of my GPO subscription. This was without my consent and my online account states that you have no credit card on file for me?? The next day (10/31/09) I cancelled my subscription online. Almost 3 weeks later and there is still no refund. When can I expect this?

Im not receiving password resets!!

support@line6.com — Thu, 19 Nov 2009 20:49:07 GMT

Hi, I have another account Username: Gibbo47n which I think is linked to email account Gibbo47n@yahoo.co.uk. I have been trying to log in for the last week or so to download Variax Workbench as I have recently purchased a Line 6 Variax 700 Guitar, but unfortunatly I m having trouble remembering my password and Iv reset it several times but still I have not received an email with my password reminder to the above email. I have tried to re register myself and I have been successful but when Iv tried to re register my POD XT LIVE Iv been unsuccessful as it is currently registered with other username. Can you please advise me of what I need to do to be able to reset my password? I can supply other security information iif neccessary. Thanks

Having problem with registration of Guitarport - can you help please.

support@line6.com — Fri, 20 Nov 2009 23:23:12 GMT

I've bought a Line6 Guitarport on Ebay - and have asked seller to remove his registration for it - he says he's unable to do this - can you help please.

Vetta combo - Gone crazy

support@line6.com — Sun, 17 May 2009 15:14:59 GMT

Hi there

Just had a strange experience today. The amp buttons + Save, User and Factory buttons started to flash very quickly, and the amp sounded very strange. I tried to switch to another patch using the board, but it returned to the patch and continiued to flash.

Anyone knows about this issue ?

X3 Pro + shortboard footswitch questions

support@line6.com — Tue, 17 Nov 2009 17:12:39 GMT

I've been thinking about selling off my X3L and getting an X3 Pro + shortboard. I have a couple of questions about footswitch controls...

First question: Can I set up the reverb switch per patch to control comp/amp/loop/verb? Or am I limited just to turning reverb on/off with this switch?

Second question: Can I use any footswitch in the same way I use the "TONE 2 / HOLD FOR DUAL" switch on the X3L?

Difference between Spider IV and III

support@line6.com — Sat, 10 Oct 2009 06:49:53 GMT

What is the difference (soundwise)? is it better?

Non-working power adaptor

support@line6.com — Thu, 19 Nov 2009 21:28:59 GMT

Hi Line 6,

My name is Robert, and i'm from Wollongong Australia. I recently purchased a brand new Pod X3 off of an american ebay user, which arrived here two days ago. Due to the difference in power supplies between the US and Australia, i bought a 240->120 step-down transformer to be able to use the power adaptor for your product, however, upon plugging it in today, i found that my Pod did not work. I got out an electrical meter, and discovered that there is no voltage coming out of the Pod X3's power adaptor that arrived with the product (the seperate transformer was putting out the correct amount).

My question is two-fold in nature: Firstly, does this non-working adaptor get covered under warranty? If so, how do i claim this warranty? Furthermore, are there Pod power adaptors that are specifically made for the australian 240v power supply?

In case it's of any assistance, my X3's registration number is (21)X3B1S5931002196.

Robert Anderson

Where did the red dots go? How to keep track of what is new

support@line6.com — Sun, 15 Mar 2009 21:20:29 GMT

With the older forum there were red dots to tell us which threads & responses were new for me. I now miss that!! Is there something new that is equivalent to the red dot system? I am wasting lots of time reading things I have read before.

Problem with the displayb on my XTpro

support@line6.com — Mon, 02 Nov 2009 01:45:54 GMT

Hi,

Every once in a while the display on my POD xtPro malfunctions, the screen completely lights up (all the pixels are lit) instead of showing the line 6 symbol. I fear that this will have to be serviced, any ideas?

Thanks,

-George

M13 patchdatabase Online!!

support@line6.com — Wed, 17 Jun 2009 23:48:49 GMT

http://vettaville.net/m13%20patch-example.jpg

http://www.vettaville.net/m13%20patch-edit.jpg

more tomorrow, first gotta have some sleep...

High Frecuency Noises from USB connection on UX8 and POD X3Live

support@line6.com — Sat, 18 Jul 2009 00:16:19 GMT

Hi:

I'm experiencing two similarily annoying problems with my Line6 gear and USB connection.

The UX8 make a high pitched noise with some kind of cyclic pattern, and the X3Live makes just high pitched noise.

Looking at the forums, I tried the "Balanced Cables Solution" with no luck on the UX8, and seems to be no solution to the X3Live noise.

I have very common gear: iMac 2.0 Intel running leopard, Behringer Xenyx mixer, Logic Pro, Gearbox, Alesis passive monitors driven by an Alesis Amp. TRS Balanced cables from the UX8 to the mixer, and from the mixer to the amp.

I run the computer default audio (alarms, iTunes, Quicktime) through the headphone output of the iMac to the mixer tape in, and the "Studio Audio" through any of the Line6 units.

The problem gets worse when using "default audio" at the same time as the studio stuff.

How can I get rid of this?

Please help!!

Pod Farm iLok and Hardware Authorization

support@line6.com — Tue, 14 Apr 2009 12:41:48 GMT

For many reasons I need to have Pod Farm plugin with iLok Authorization (quik works) and Pod Farm Platinum (PODxt authorization) for more complex work.

How can I switch from iLok Authoriation to Hardware Authorization?

Running both as RTAS Plugin for Pro Tools 8 DAW.

Thanks!!

Apple Snow Leopard compatibility

support@line6.com — Sat, 29 Aug 2009 12:18:15 GMT

Hi guys,

I've just installed Snow Leopard on my Mac and have discovered that the Guitar Port/Gear box interface does not seem to be compatible with it. Is there gonna be a software update anytime soon to rectify the problem? When i plug the Guitar Port into the mac it doesn't seem to be showing up and when i run Monkey and it asks me what interface i want to configure, the Port does not show up in the window.

Cheers,

Paul.

Guitar Port driver error

support@line6.com — Thu, 19 Nov 2009 20:18:45 GMT

Hi,

Something is wrong here. When starting Gear Box the message "Ignoring connection to GuitarPort. This device has an incompatable driver installed".

Running GuitarPort as such works, but still displays message "Please upgrade to latest version of GearBox" (allready installed).

Monkey reports driver update from 2.0.0.0 to 3.4.3.8 but after running the update (GuitarPort USB disconnected and connected as required) things doesn't change. The result is the same as above, even the Monkey report even if I just updated.

What might be wrong here?

This is the installation chain:

In bottom my original GuitarPort installation from CD version 1.12

Then the installation of Monkey 1.31

Then upgrade GuitarPort to version 2.01.1

that when opened recommended installation of

GearBox 3.70

Anything wrong with this order?

Anyhow, it all ends with a GearBox that can play files from inline but doesnt include the GuitarPort input.

Not really what I'm after.

Can you please help?

Regards

Michael

X3 Live - Stereo Digital Delay Available?

support@line6.com — Sun, 09 Aug 2009 03:03:29 GMT

Is Stereo Digital Delay available for the effects for Pod X3 Live? I've owned this for a few months and haven't really found all the cool things this unit will do. I'm just trying to be a guitar hack and sound like some players/songs I like (Edge/U2, David Gilmour, Tom Petty, Green Day, etc.). I haven't found a good discussion/group on what is the best amp and/or effects that doesn't cost in the $1000's. I see that the DL4 has stero digital delay and other Line 6 units look like they have a lot of features. Again - is the X3 Live up to sounding like these types of players rigs or should I start over and go analog for amp (marshall, fender, or vox), pedals and try to find out to do this on these tools instead of something like the X3 Live?

Potential M9 bug

support@line6.com — Tue, 17 Nov 2009 14:13:47 GMT

Hi all. As I've stated before, I own both the M9 and the M13. The M9 currenty resides on my small board which I use at church, where we play mainly a blues/gospel style. Anyway, last night at rehearsal, I noticed something that I think is probably a bug. I noticed that when I'm in a scene and I hit the buttons to go into the scene selection menu, the tail of the effects that I'm running cut out before I select the next scene. They cut out as soon as bring the menu up (the menu showing the A's and B's in the circles). I know that that the tails cut off when going from scene to scene, but I would not expect them to cut out from just going to the menu. This happened in both momentary and latch mode.

Can someone from Line 6 confirm this is bug?

How do I transfer my activated Riffworks 2 Line 6 Edition to a new computer

support@line6.com — Sat, 02 May 2009 18:24:14 GMT

How do I transfer my activated Riffworks 2 Line 6 Edition (upgraded from Riffworks) installed on my old laptop (w/Windows XP) to my new desktop (w/Windows Vista 64)? The instructions for license transfer seems to apply only to the Line 6 hardware (I have a Guitar Port), not computers.

Vyzex Pocket POD Software 1.17 never worked

support@line6.com — Thu, 15 Oct 2009 09:05:46 GMT

hello,

i have a apple power book 15" 1.67ghz. MacOSX 10.4.11

i bought my pocket pod in 2007. in time i installed the Vyzex Pocket POD software (i can't remember what version)

but the Vyzex Pocket POD software never started up cause a dialogue window said there's no midi or something choose ...

when i pressed the ok button in this window the turning wheel from MacOSX turned forever and the Vyzex Pocket POD just didn't started up.

then i had enough from all these troubles with Vyzex Pocket POD and i didn't try used the Vyzex Pocket POD software anymore until

today more than two years later. cause today i tried to install the actual version of Vyzex Pocket POD 1.17 (after reinstalling my whole MacOSX system at least 2 times in the meantime).

today with another MacOSX Version (10.4.11) and the new Vyzex Pocket POD version 1.17 the same problem happen as in 2007.

i tried to get information in the Vyzex Pocket POD forum but i couldn't find help as in 2007. i deleted all the files and preferences who belongs to Vyzex Pocket POD from my system and reinstalled the Vyzex Pocket POD software but nothing happen the same problem as in 2007. i replaced the MQL6T.dylib file and so on but still nothing happen the software won't start up.

i'm really really disappointed about Vyzex Pocket POD and the Pocket POD hardware.

please help me to get the Vyzex Pocket POD software working. this is really the last try before i'll resell the Pocket POD cause there's no use for it without a software.

thanks

jürgen

Can not down load music files to CPU (marked or unmarked) ?

support@line6.com — Mon, 02 Nov 2009 22:21:34 GMT

What to I do?

xtlive won't update drivers

support@line6.com — Fri, 06 Nov 2009 20:49:10 GMT

I've installed line6 monkey, and when I run it, it says there are updates available for my drivers. So I highlighted the drivers section and clicked 'update section'. It ran me through the process, and when it was done it said drivers were installed to my computer. So I ran monkey again, and it said drivers werem't updated. So I did it again and the same thing keeps happening. It successfully downloads the drivers, but they won't downlaod onto my pod. money says my device isn't connected. So I chose the device i wanted to connect, pod xt live, and clicked ok. it led me back to the monkey page and nothing happened. this too, repeats when I try it. my computer recognizes that it's connected, but monkey doesn't. I have the latest version on monkey, if that makes a difference. I don't know if my gear is registered, but when i first tried to update the drivers it said checking gear registration and then did the download, so it must be registered.

Possibility of effects unit blowing amp?

support@line6.com — Sat, 21 Nov 2009 03:04:24 GMT

I use the M13 with my Mesa Boogie Dual Rec, I was recording and I wanted to record some feedback for ambient noise tracks, so I switched on a delay and a reverb on the effects unit. For a second it was feeding back nicely, with the decay and mix controls turned up quite high on both effects, but it began to build and build, louder and louder (feedback loop?) until I had to hit the effects off. Instantly after my amp was noisy as hell, humming very loudly and making scratchy noises when I adjusted the knobs on the front of my amp. I hit the standby button off/on and there is a THUMP that is ridiculously loud coming from the speaker. I know for certain this isn't a speaker issue, it's either my amp (which has been sent in and diagnosed before when I experienced the same problem, they replaced my loaded power tube board because the screen capacitors were fried...but by what? After that it worked fine) or my effects pedal having some weird issue and loading my amp down when I use too much delay and reverb at the same time. On a timeline basis, there is a correlation because this never has happened before I owned the M13, and since I've had it this is the second time this has happened. When it does happen, it blows the loaded power tube board, the screen caps, the power tubes, and the diodes. Add to that the price for it to have the parts replaced at $100 an hour, the cost of parts, and the cost of shipping...it's a small fortune. I can't afford it this time, and I'm really frustrated. Ideas or suggestions? I'd be very greatful if a Line 6 tech employee would join in on this little discussion.

FBV2 Troubles

support@line6.com — Tue, 10 Nov 2009 06:09:10 GMT

Does anyone have a schematic?

I really can't afford to send it in, and I have the skills and tools to fix it my self. but i need a schematic.

Thanks in advance.

unregister a pod XT pro

support@line6.com — Mon, 09 Nov 2009 14:29:09 GMT

Hi, I've recently sold my pod XT pro, and I need to unregister it from my account so that the new owner can register it to his account. However, it seems to be the only product that isn't appearing on my profile. any chance someone could tell me where it is registered? thanks.

variax 300 acoustic steel pickup

support@line6.com — Fri, 03 Apr 2009 13:01:13 GMT

I bought a used 300 and there's a noticable difference in the volume of the lower 4 strings compared to the 2 high ones (the two high ones are very sensitive, while the lower ones are kinda dead). This is in respect to volume on the amplifier, if played without plugging it in, there's no noticable difference. Even the 2 in the middle are less volume then the lowest 2 strings. I've replaced the strings 2x now, and although with each try I noticed a different sensitivity in each string, they're still not the same and the low ones are not "loud" enough.

Is there a gain control per string? Is this a common behavior or is there something wrong that needs repair? Someone told me the piezo pickup may need to be replaced, however I can't find any store (including the line 6 online store) that carries them. Any advice/help is appreciated - thanks :-)

Including the X3 live in different signal chains

support@line6.com — Thu, 19 Nov 2009 23:26:11 GMT

So I've been trying to figure out some different setups for the X3 Live..What I want to know is how could I used the X3 for basically just delays, phasers, flange, and thats really it...I would use external stompboxs for distortion and overdrive (ie a TS-9 or Sparkle Drive)...then I would want those tones to come out of my amp (let's say a Vox AC-15)..to be more clear I would want this signal chain: guitar, delays (X3), overdrives, amp....or how could I do guitar overdrives, X3, amp..just some questions about setups hope you can help thanks.

No sound from Pod Studio GX

support@line6.com — Tue, 09 Jun 2009 19:50:29 GMT

I can see the levels responding to my guitar, but I am getting no sound from by PC. Even when I plug headphones into the unit - still no sound

I have bought BackTrack + mic, and loaded Backup Setup Utility, but am unable to access the settings software (ie shown on page 11 of manual. Help! Thanks. Terry Kelly

support@line6.com — Wed, 05 Aug 2009 14:40:52 GMT

I have bought BackTrack + mic, and loaded Backup Setup Utility, but am unable to access the settings software (ie shown on page 11 of manual). Help! Thanks. Terry Kelly

Possible to add a "Preset Mode" in next firmware update?

support@line6.com — Sun, 05 Jul 2009 01:49:51 GMT

Would it be possible for the M13 to have a Preset Mode in the next software upgrade? Try to visualize this:

Row A & B: You can program each individual footswitch on Rows A & B to have a preset. You could have up to 4 effects per footswitch on Rows A & B.

Row C would show the effects chosen for each present. You’ll have a total of 8 presets per scene. You could even program one preset to be blank. Kind of like a bypass button where you only hear the sound from your amp with no effects.

Let’s just say you programmed FX Unit 1/ Row A for your solo preset. On Row C you would see all the effects that are being used such as (Reverb, Delay, Phaser, and a Boost).

ROW C could be used for “Stompbox Mode”, where you can use the M13 as stompbox on/off controls. The way the M13 is used now. You’ll have 4 individual effects on row C where you can just add an effect on the fly. This would be perfect playing a LIVE gig!

I know you can do something like this in Latch Mode, but you can’t add or tweak an effect (time-based effects) in Latch Mode. For those of you that play live you all know that the songs are not always the same tempo (unless you're using a drum machine). In Momentary Mode if you want more than one effect you have to step on 3 to 4 effects. Then you have to step on all 3 or 4 effects to turn them off. I wanna concentrate on playing, not tap dancing.

Having it set up this way would be like having a Loop Master/Effect Switcher that you see on huge, professional touring pedalboards. Here is Tim Mahoney’s pedalboard set up. You see he has a lot of effects, but he controls them all with a Loop Master Switcher. He can configure each button on his Loop Master Strips to play different combinations of effects. You'll see his pedalboard at the 4:25 mark of the video:

Buzz in Spider III 15 amp

support@line6.com — Thu, 05 Nov 2009 02:40:57 GMT

When I first start the amp, it will get a loud buzzing sound, but if I move the Channel Volume knob a little either way, the buzz goes away. What could be the cause of that?

Output Transformers...(Marshall vs. Line 6)

support@line6.com — Fri, 22 May 2009 18:20:52 GMT

I've always been a Marshall lover for a long time. But after listening to someone performed an SV112 I fell in love with the tone. I bought one but when I started gigging with it, I soon felt there's something missing on the overall sound. I missed the Marshall timbre so retubed my SV with EL34L. Retubing drastically changed the voice of the amp obviously. Now I'm in a process of swapping output transformers. I have a bit of knowledge in electronics so you can say I'm quite brave in modding my 8-month old SV.

http://line6.com/community/thread/8151;jsessionid=FF5E022ED3FD5FC98D56F6EE97EEEAC2?tstart=0

The Marshall OT is a direct swap.I will be using the 16ohm tap so I can use my Marshall 4x12 cab when needed. I'm expecting a lot more punch and clarity when mod is done.

Check out the side-by-side photos of the stock SV112 OT and my old spare 50W Marshall JCM900 output trans. The peuny SV112 OT has gotta go (it's made in Taiwan).

Gear box doesn't act as POD XT GUI

support@line6.com — Wed, 08 Apr 2009 10:35:15 GMT

Last days I was playing with Line 6 various software (Gear oxB, Pod Farm, L6Edit) in order to evaluate which one works best for me, since now I've almost played with POD standalone; pretty happy with that but I would like a better UI ;-)

Now I have a problem with Gear Box: as title says, it doesn't work as GUI for my POD XT; I mean that it loads my tones from HD and send them correctly to POD but when I try to change any parameters in Gear Box they are not sent to POD.

The reverse route works as expected, I mean that tweaking POD knobs or buttons makes correct changes to Gear Box GUI.

L6Edit works correctly, as well.

any ideas

thanks in advance

Substitute for Line 6 EX1 Expression Pedal

support@line6.com — Thu, 03 Sep 2009 17:00:11 GMT

Can anyone recommend a substitute for Line 6 EX 1 Expression Pedal for the POD XT Live !?

I read the reviews for the Line 6 pedal and they are really poor. So I thought may as well go in for a different brand of external expression pedal to attach to my Line 6 POD XT Live !

DI on spider valve

support@line6.com — Wed, 08 Apr 2009 22:33:05 GMT

Is it possible to raise the DI level because its really low. Thanks!

Line 6 Pod XT live Registration

support@line6.com — Tue, 22 Sep 2009 01:14:34 GMT

ok so i forgot my email and password and i have already registred my pod in an old account, i've made a new one im trying to registr it in my new account but it wont let me, so how do i do that?

how to get a signal on my digidesign 003 from kb37?

support@line6.com — Sat, 07 Nov 2009 00:05:22 GMT

Hi,

i just purchased the kb37 with pod farm 1.03 and get it to work .

im using a macbook pro ,a digidesign 003 rack with pro tools 8.

a few questions:

how do I get a signal from a guitar through the kb37 in a way that i can use the pod farm as a plug in on pro tools to record stuff .where should i plug ins and outs so i get to record ?

how do i get to use the kb37 as a midi controller through pro tools 8 ,or through digidesign 003 rack?

please help me ,it's so frustrating to have the gear and not being able to use it.

thanks a lot!

Information on the new eq's

support@line6.com — Mon, 09 Nov 2009 06:48:50 GMT

In our last update, we got 4 eq's and I do use them, they enhance my tone significantly, but I feel like I can't take full advantage of the eq's, due to my lack of knowledge of eq's.

So; who can tell me the specifications and use of the eq's?

Lefty variax

support@line6.com — Thu, 02 Apr 2009 13:30:27 GMT

Can you produce a lefty Variax 700 and a lefty Acoustic Variax, via a custom order, for me?

Line 6 Toneport ux1

support@line6.com — Sun, 30 Aug 2009 17:39:37 GMT

I bought this a long time ago. i never really used it, but now i just tried to make it work, but my computer doesnt recognize it. i only plugged in the usb, and i dont know if i am supposed to be using any other wires. i want to know how i can fix/install this.

Power supply for EU, DC or AC or both?

support@line6.com — Tue, 09 Jun 2009 23:22:07 GMT

Hello,

I am disappointed that the line6 jm4 looper ships with a very limited and heavy power supply. I ask that line 6 ditch this 80's style giant brick and move to a light modern supply that can handle North America, South America, and Europe standard voltages.

I am in the EU and bought 220v to 9v 3A DC supply. I just noticed on the line 6 unit it say 9v AC minimum. Does the line6 work with a 9v DC input as well, or only 9v AC?

Don't want to blow up the unit, so please lmk asap.