Community : Thread List - All Communities

help with tones please.

support@line6.com — Sun, 22 Nov 2009 01:59:45 GMT

Alright when I bought the xtlive, I was told that all of the tones from the pod 2.0 were also on it. I really like 2 drink minimum and back in black. Before someone says to just use the gearbox, I am legally deaf, I can't differentiate tones really well. Can anyone tell me how to get those tones or what the settings are?

thanks

brett

Where do I go to download specific artists' sounds to put onto my POD version 2.0?

support@line6.com — Sun, 22 Nov 2009 01:30:41 GMT

My friend sold me his guitar a few months ago and he gave me his POD version 2.0 with it. He told me a long time ago, he downloaded sounds from bands like The Smashing Pumpkins and Nirvana from online and was able to transfer and save those sounds into his POD, but this was not the POD he sold me. He did this with his other POD, which might be an more recent version than the one he gave me. I really want to be able to play specific sounds from my favorite bands through my POD, but my question is where online would I go to get these sounds and is it free? My guess is that my POD version 2.0 is too old to even support this function and that I would need a newer version of the POD and a program like POD Farm? I really want to know the answer to this. I would appreciate any help.

Thanks,

POD user: Robert

2010 Free Update ! Models and More for M13 - YES O NO ?

support@line6.com — Tue, 10 Nov 2009 06:26:36 GMT

Line 6 will give us a surprise to users of m13 with a new firmware in 2010 ? A new free update! and new models and more .....

thank you! I love my m13!

m13 will change the world of pedals!

line 6 give us another new update! please

Linux support

support@line6.com — Thu, 08 Oct 2009 04:55:36 GMT

Hey, Guys!

Is there some project about Linux support? Drivers? Software? Tools?

Please, the Linux users need more attention, because we are now a significant part of your market!

Regards,

Felipe.

Display has solid black bar on top line and shows Tone2 name below it.

support@line6.com — Wed, 21 Oct 2009 15:32:11 GMT

I just updated my firmware to the latest version. Fixed an issue where I couldn't toggle between Tone1 and Tone2. But now I have new problems.

When editing, I've found that sometimes when I click stompbox (or engage the Wah, or mod, or delay) the Tone2 light turns off and the display shows black bar on top line and still shows Tone2 name. So I see the name for Tone2, but it seems I might be actually in Tone1 (or neither). Where the name for Tone1 would be, it's just all blacked out.

At that point engaging or disengaging any of the effects (stompbox/mod/delay) doesn't seem to do anything. I have to either switch to another patch, or toggle Tone1/Tone2 back and forth to get back.

It's getting very frustrating when trying to edit patches because of this glitch. It did not used to do this before the update.

It's also begun to change screens sometimes while I'm editing. I read in another post a suggestion to move all pots and park them, which is good advice for minor corrosion and buildup on the pots. But I didn't have this problem at all before the update, and now it's happening a lot.

I'm afraid that it seems I've traded one problem for two other problems.

Any help, or ideas, or ways to fix these problems?

Thanks in advance.

phil

Check out our recording

support@line6.com — Sat, 21 Nov 2009 23:53:40 GMT

Hey, guys, hopefully someone will see this eventually and check out the recording of my band's song Shudder.

The reason I created this is that the other recording groups were basically about home recording and I wanted a place where you could post clips of your band's recordings. All the guys in bands need a place to show off their tunes as well.

Hopefully, there are some like me, who are recording their band themselves and can ask advise and spread some knowledge about the whole process.

All that being said, check out Shudder. We recorded all the tracks at my drummers apartment and I took them home, brought them into Sonar and started mixing and this is the result so far. The vocals are going to be redone-we may go to a pro studio for the vocals. I actually screwed up the first time I mixed this and put the vocals in the wrong place, but I like the result so much I brought it to the band and I think we're going to use this version. Originally, the vocals come in much earlier.

Please give some constructive criticism. There's always work to be done, but I think we're pretty close with this.

Spider Valve 112 Knobs

support@line6.com — Sun, 27 Sep 2009 02:36:31 GMT

I lost a few knobs on my spider valve 112. I know Line 6 can send you new knobs that just slide on but the whole shaft for my drive knob broke off. What is the contact info for the department of the company I need to contact and what advice can anyone provide on the broken shaft for the drive knob?

2x12 4x12 missing on pod xt pro

support@line6.com — Sun, 22 Nov 2009 01:07:27 GMT

when i press the i/o dig i get to the page what are you connecting to and i cannot get the studio direct to change to 2x12 ,4x12 also the series fx loop and spdif digout are missing from the same page.

the firmware is version 3

do i have to set this to turn the mics and room components of air ?

and if i wanted to go back to an earlier wesion of the firmware how would i do this.

pod farm and reaper

support@line6.com — Sun, 22 Nov 2009 01:06:28 GMT

reaper recognizes podfarm in my vst and when I turn on my fx (green) and add podfarm I get complete silence and cannot adjust sound fx. I add another fx and uncheck podfarm and I can work my fx and adjust, then I turn on podfarm and get silence again, no possibility to adjust. What's up with this

UX1 Stalling Propellerhead Record on Launch

support@line6.com — Sun, 22 Nov 2009 00:46:07 GMT

Hi Guys,

I’m pretty unsatisfied here and completely under awed with with my UX1 so far...

My intention was to initially use the UX1 as a dongle to expand the Line 6 amps in Record but I have several issues. I shall sent these out.

1) I now have the UX1 up and running, but if it is plugged in Record stalls when it gets to the launch splash screen. It then proceeds to crash my Mac entirely. If I unplug the UX1 Record launches fine.

2) There were not any installation instructions in the package I received, although I have so far pretty much worked it out.

3) There is now a hum on my right hand M-Audio BX5a Monitor, this is new and I am worried it may be due to...

4) When the UX1 crashed my Mac the first time I had my Lexicon Alpha plugged in and monitors on in anticipation of the great sounds I was going to get with my new UX1 and Record. However what I did get was a very loud crack which seems to have blown the inner workings of the Alpha, and possibly damaged the Monitors!!

So presently I cannot use the UX1 to listen to Record and my existing soundcard is blown.

Pod Farm issue

support@line6.com — Sun, 22 Nov 2009 00:39:59 GMT

Hello,

I downloaded Pod Farm and it is preventing me from using the Model Packs that I have purchased and that are available in my POD X3.

I cannot remove my iLok as I will no longer be able to use much of my software and so I can now no longer use my POD X3.

Is there a way to fix this?

Thanks