Community : Thread List - All Communities

Collection Feature in Vyzex Editor not working

support@line6.com — Sun, 22 Nov 2009 09:01:02 GMT

I can't seem to get the "Collections" feature of Vyzex Editor working.

I can open the Collection View in Vyzex Editor. I can add tone patches to the Collection View, and they appear in the list. But when I quit Vyzex Editor, the Collection View pane is always empty the next time I start the program. What could be causing this?

I'm using Vyzex Editor 1.17 on a current model MacBook Pro (Mac OS 10.5.7). I'm using this with a Pocket Pod with firmware 1.01.

Thanks.

I recently purchased a Spider Jam Amp. Is the FBV Express MkII the best pedal available for this?

support@line6.com — Sat, 21 Nov 2009 23:15:34 GMT

I recently purchased a Spider Jam Amp. Is the FBV Express MkII the best pedal available for this amp, and does it work with this amp?

Spider Jam questions

support@line6.com — Sun, 22 Nov 2009 06:46:54 GMT

Hello,

Is the Spider Jam amp in the same family as the Spider IV line or is this a Spider III line? Is there such thing as a Spider IV Jam amp?

Also is the Shortboard (older version) compatible with the Spider Jam amp or only is the MKII unit?

Thanks

Change your patch on the Spider 3?

support@line6.com — Sat, 21 Nov 2009 16:37:16 GMT

Is there a way to change the patch on a Spider 3 amp without using the buttons on the amp? I remember using an FBV4 with an ethernet cord to my amp and it didn't acknowledge it. I'd love to find a way. Thanks for any help!

Benefits of running latest Gearbox vs. an old version?

support@line6.com — Sun, 22 Nov 2009 02:41:50 GMT

After not using my recording/practicing computer for a long time, I blew the dust off and fired her up again, but the old UX2 drivers didn't want to load for some reason. Long story short, all that's fixed, and I'm now running the 3.4.3.8 driver, 1.01 firmware, and Monkey 1.31.

The only question is whether there's any benefit to updating the old Gearbox from 1.02 (yeah, it's been a really long time... lol) to the latest 3.70. Are there any improvements to be gained in terms of functionality, stability, etc.? Or is it just simply a huge, unified driver that I don't need which includes all other Line 6 products?

Sorry if this question is a bit esoteric, but 1.02 seems to work fine, so in this case I'm somewhat of a believer in "if it ain't broke, dont fix it". Anyone happen to know?

Check out our recording

support@line6.com — Sat, 21 Nov 2009 23:53:40 GMT

Hey, guys, hopefully someone will see this eventually and check out the recording of my band's song Shudder.

The reason I created this is that the other recording groups were basically about home recording and I wanted a place where you could post clips of your band's recordings. All the guys in bands need a place to show off their tunes as well.

Hopefully, there are some like me, who are recording their band themselves and can ask advise and spread some knowledge about the whole process.

All that being said, check out Shudder. We recorded all the tracks at my drummers apartment and I took them home, brought them into Sonar and started mixing and this is the result so far. The vocals are going to be redone-we may go to a pro studio for the vocals. I actually screwed up the first time I mixed this and put the vocals in the wrong place, but I like the result so much I brought it to the band and I think we're going to use this version. Originally, the vocals come in much earlier.

Please give some constructive criticism. There's always work to be done, but I think we're pretty close with this.

Studio UX2 and Pod Farm - Freezes my computer

support@line6.com — Sun, 22 Nov 2009 07:32:25 GMT

I was trying to install my new Studio UX2 and Pod Farm.

I downloaded the latest Pod Farm for Snow Leopard and it keeps coming up with an error message:

The System extension "/System/Library/Extensions/Line6Audio.kext" was installed improperly and cannot be used. Please try reinstalling it or contact the product's vendor for an update.

What does it mean? I downloaded the latest driver as well from the "Downloads" and it came up with the same message.

Also, as soon as I plug in the Studio UX2, it freezes my system straight and I have to Force Shut Down.

Can anyone tell me why it happens?

Thank you

Anything new out there?

support@line6.com — Sun, 22 Nov 2009 07:32:10 GMT

Getting lonely in here.Just wondering if anybody has anything going on.

PODxt

support@line6.com — Sat, 21 Nov 2009 23:39:41 GMT

what free software download do I GET ? I JUST BOUGHT THE PODXT ANDWHAT I DOWNLOADED DIDN'T WORK AND HAD ISSUE WITH JAVA---AND MY JAVA IS UP TO DATE VERSION. ALSO I WANT TO STOP THE COMMUNITY MESSAGE AND DON'T REMEMBER HOW I TUNED IT ON. THANK YOU !

2x12 4x12 missing on pod xt pro

support@line6.com — Sun, 22 Nov 2009 01:07:27 GMT

when i press the i/o dig i get to the page what are you connecting to and i cannot get the studio direct to change to 2x12 ,4x12 also the series fx loop and spdif digout are missing from the same page.

the firmware is version 3

do i have to set this to turn the mics and room components of air ?

and if i wanted to go back to an earlier wesion of the firmware how would i do this.

distortion on D string piezo

support@line6.com — Sun, 22 Nov 2009 00:26:49 GMT

Hey Guys,

I was doing some recording in the studio the other day and noticed that the D-string on my variax 700 is making a buzzing sound when I record. I triple checked i wasn't getting a fret buzz anywhere. The more I looked into it the more is sounds like a distortion on the piezo.

I've attached a sound file of it. My chain is Variax > VDI > Pod X3 Pro > USB > Logic Studio 9.

I've recorded it completely clean and have included a comparison of the G string too.. the attachment kept failing so its here: http://public.me.com/sb00020

I'm guessing I'm going to need to get it replaced. Does anyone have any experience with similar problems? How long did it take to be repaired etc? I'm in the UK if that makes any difference.

Thanks in advance

Sam