Community : Thread List - Stompbox Modelers / ToneCore

Increased Verbzilla noise with trails switch enabled?

support@line6.com — Wed, 18 Nov 2009 04:29:23 GMT

Hi guys,

Just got my brand new VERBZILLA today and want to use the trails feature, but when I switch it on, there is noticable static/hum while the effect is OFF. I just want to know if this normal? I'm guessing with the trails feature enabled, the FET bypass is disabled?

My set up is:

Les Paul Standard w/ Burstbucker Pros

Boss TU-2

Ibanez TS9

VERBZILLA

into the front of:

JCM 800 2203

I tested it like this:

1) Effect is off, trails is OFF. some amp hum is audible from speaker

2) Effect is off, trails is turned ON, increased hum from speaker is audible

All pedals are powered by PEDAL POWER 2. Anyone else have this problem? Please note that I don't have an effects loop on my amp.

Thanks for your help!

Brian

Are 147 Leslie sounds in ToneCore Roto-Machine same as 147 in POD XT LIVE?

support@line6.com — Fri, 20 Nov 2009 23:02:20 GMT

Currently Being Moderated

Oct 22, 2009 4:00 PM

I have both of these units. My question is this:

Is the 147 model/patch in the POD XT LIVE the same as the 147 model/patch that is my Roto-Machine? If so, I really don't need both. I know this sounds academic, but I'd really like to hear the answer from someone with definitive knowledge. It is clear that the Roto-Machine has more controls and switches, such as the Blend and Drive, but it would seem that I could manage the speed with an expression pedal. Anyway, does someone know the facts?

Power supply confusion 2

support@line6.com — Thu, 29 Oct 2009 03:55:38 GMT

Can't edit the first post so here. thanks

I checked the line 6 power supply faq that there's an alternative to a [9VAC 1200mA minimum] power supply.

it said
"PX-2 AC: (Stomp modelers, All PODs, XT, and X3 series, XPS, Micro Spider): Output: 9v AC, 2000mA. The center pin diameter is 2.5mm.
*
Line 6 power supplies are available at you local dealer or at our Online Store.
*
Note: The Stomp Box Modelers will also work under DC (Direct Current) at 12V, 500 mA minimum. The center pin is positive (yes, center pin is positive as opposed to the DC-1 power supply)."

but then i checked the flatliner site and it said

"The Line 6 modelling pedals can be powered through the 9VDC (MM4, FM4) or 12VDC (DM4,DL4) outputs. Since these effects draw more current (150-185 mA) than average you can connect one effect with one output. The FLATLINER can power several Line 6 effects simultanously. Note: Line 6 modelling effects have reversed polarity. Use the right cable."

9VDC and 12VDC?

help? what does it really run in? I really should be believing the line 6 site, but i asked the line 6 dealers here and they said that i can't use a 12vdc adapter. can i please have a confirmation that it really CAN run on 12vdc 500mA? I'm using a DL4 and an MM4.

Plus, does it have to be regulated?

and if ever its allowed, i was wondering if i could use a 1000mA 12vdc adapter to chain a dl4 and an mm4.

sorry if im asking too much. I hope you guys answer this

thanks

Lester

DL4 powers up at home, but not at clubs...

support@line6.com — Mon, 16 Nov 2009 18:37:46 GMT

I may be missing something completely elementary, btu i've run through several different configurations, and have been completely unable to get my DL4 to even power up at a club.

At home & the rehearsal space, i plug in the power supply and input/output cables, and everythign is fine. This has been done in multiple locations, multiple wall outlets, different cables, and in different positions in my pedal array. however i have tried to gig with this pedal twice, and have been unable to get it to even power up. have tried multiple configurations, even plugging the pedal directly into an outlet rather than a powerstrip etc... it won't even light up. i can place it at the end of my effects chain and it allows signal through, but will not function as a pedaal.

I've been through numerous configurations, and have had several sound guys, both house and touring, fiddle around and come up with nothing.

any ideas?

DL4 CAN'T RECORD

support@line6.com — Sun, 15 Nov 2009 20:15:16 GMT

Hi There

Bought a Line 6 DL4 unit yeaterday but I can't get it to record as per the manual, e.g. select loop smapler, press first button , light comes on. But on mine following this nothing happens not even a light. Any help would be useful

regards

Andy

DL 4 bug!

support@line6.com — Tue, 09 Jun 2009 06:06:33 GMT

Hi!

I have noticed a BIG problem with my Delay Modeler unit. I'm not able to save any multi-head presets!

I've owned a DL 4 earlier, and I don't remember it having this problem. I peeked inside, and noticed the EPROM version to be v1.6. Could it be possible for me to upgrade the EPROM-chip to a newer version? Could it be possible for you to send me a new chip? I think I could manage the replacement myself, or at least a qualified repairman should be able to do it. This would save me so much time, since I'm a professional musician, and I really couldn't wait to much for a new pedal.

Thanks,
Joona

using verbzilla in stereo mod

support@line6.com — Sun, 15 Nov 2009 11:25:08 GMT

hi, i'm french, so excuse my poor english.

I'm interesting by verbzilla but I have a question about the stereo mod.

If I plug input1 and input2 with a stereo signal, can I have the 2 signals mix in the output1 for plug it in mono amp ?

Thank's for your answer.

Suddenly dead dm4

support@line6.com — Thu, 12 Nov 2009 21:29:17 GMT

Hi there,

My dm4 is suddenly stone dead. No power from either ac adapter or batteries. I took the circuit board out and everything looks fine, so it's beyond my ability to figure out.

I'm in Toronto, and I don't know if there is any qualified repair shop around here.

Any ideas what it might cost to diagnose and repair?

DL4 looper problem

support@line6.com — Mon, 16 Nov 2009 18:27:22 GMT

I just bought a DL4 cheap off craigslist and the looper does not work, is there a quick fix or am I out of luck?

DL4 loops gradually fading

support@line6.com — Mon, 09 Nov 2009 17:33:53 GMT

Hi, I've been having problems with the loops fading after they've been sampled. Any suggestions? Should i reset it?

Thanks,

Joey

Volume drop on just a preset button of my DL-4

support@line6.com — Wed, 04 Nov 2009 18:28:58 GMT

Hi all

I'm just enjoying my new DL-4.

However, I found that any delay that I save on preset A will noticeably drop my volume when engaged.

That won't happen even if the exact same configuration is saved on presets B or C. The volume drop is specially noticeable if distortion is on.

I'm using alternate bypass, and a original Line 6 power adapter.

Any clues on what may be wrong?

Thanx a lot!

clubacana