Community : Thread List - POD, Pocket POD, PODxt Family, FloorPODs, Bass PODs

Linux support

support@line6.com — Thu, 08 Oct 2009 04:55:36 GMT

Hey, Guys!

Is there some project about Linux support? Drivers? Software? Tools?

Please, the Linux users need more attention, because we are now a significant part of your market!

Regards,

Felipe.

2x12 4x12 missing on pod xt pro

support@line6.com — Sun, 22 Nov 2009 01:07:27 GMT

when i press the i/o dig i get to the page what are you connecting to and i cannot get the studio direct to change to 2x12 ,4x12 also the series fx loop and spdif digout are missing from the same page.

the firmware is version 3

do i have to set this to turn the mics and room components of air ?

and if i wanted to go back to an earlier wesion of the firmware how would i do this.

How do I uninstall Audio-midi control panel?

support@line6.com — Sun, 22 Nov 2009 00:27:02 GMT

I started this query a couple of weeks ago because I couldn't get any sound via my pod xt or KB37 from any program on my computer until I had started Monkey. I got ill last week and couldn't get to my computer so Line 6 marked it as answered after a couple of days .....so here goes.

I bought a new Dell Studio 1557 specifically for recording (no laughing at the back there). It came with windows 64 bit Vista SP2..(waits for howls of derision to stop). I have since ordered a free Windows 7 upgrade and now feel I am digging an even bigger hole. It's quite high spec and has the fast hard drive (7200) etc.

Anyroads, when I first installed the xt drivers, KB37 drivers, pocket pod software, Gearbox, Pod Farm, Monkey and music software (Cubase SX2, Reaper 64 bit trial, Guitar Pro), I could get no sound in or out of whatever device was connected (xt or KB37). I have no other USB devices attached, not even a mouse or keyboard.

When I played a file in the music software programs (or Windows Media, web browser etc), I couldn't hear anything although the transport panel cursor was moving.

When I opened Monkey however, everything worked, until I opened another project.

I uninstalled everything.

I installed my music software programs one at a time, tested then uninstalled them. This was without any Line 6 stuff installed.

They all performed fine using the default sound. I uninstalled everything (or so I thought)

I checked Windows media and youtube to see if I got sound from the computer. I did. I then plugged the xt in via USB (no drivers loaded). Predictably, the onboard sound ruled supreme through speakers and headphones.

Now I loaded JUST the xt drivers, nothing else. Windows found and installed the drivers, and the device. The pod is fully up to date with regard to flash, drivers etc. and connected to a 15W marshall practice stack via the Left Output. This has always worked no problem.

I checked pod xt (2 Speakers) came up in my options dialog box, which indeed they did, and were selected by default. Yippee. Device working properly etc, check.

No sound.

I looked in Control Panel (Windows), and lo, there was the Audio-midi control panel still there. It wasn't uninstalled via the Line 6 Uninstaller and there was no option in Add/Remove Programs to uninstall. Still, I opened it, changed the default rate to 24, clicked Apply and the sound came on! Through my amp.

I closed everything down, waited a while, opened windows media, started a track - no sound.

I opened Line 6 Audio-midi control panel, it had reverted to 16 bit, pulled down the menu again to 24, then changed it back to 16, clicked Apply - sound happened.

So to sum up..I get no sound via my pod xt until I open Line 6 Audio-midi control panel, then I just need to do something (anything) and the sound comes on.

I can't troubleshoot anything anymore because I cannot remove Line 6 Audio-midi control panel, there is no option anywhere.

I believe this to be the root cause of my trouble, but I can't do anything about it.

Help, please.

PODxt

support@line6.com — Sat, 21 Nov 2009 23:39:41 GMT

what free software download do I GET ? I JUST BOUGHT THE PODXT ANDWHAT I DOWNLOADED DIDN'T WORK AND HAD ISSUE WITH JAVA---AND MY JAVA IS UP TO DATE VERSION. ALSO I WANT TO STOP THE COMMUNITY MESSAGE AND DON'T REMEMBER HOW I TUNED IT ON. THANK YOU !

MY USED POD IS ALREADY REGISTERED UNDER SOMEBODY ELSE AND I have no receipt

support@line6.com — Sat, 21 Nov 2009 21:39:08 GMT

I need to register my podxt but I bought it used. I have no receipt and no way of contacting the previous owner please help. I need to get some downloads and buy some new add ons!

hello, my pod xtlive is broken!

support@line6.com — Sat, 21 Nov 2009 21:39:06 GMT

Hi...i believe I am still under warranty...hope so anyhow...the place where I plug the power source into snapped into the unit...can anyone help? Thanks so much, Jeff

Bass POD XT registration

support@line6.com — Sat, 07 Nov 2009 08:13:01 GMT

Hello

I bought the bass pod over 5 years ago and thought it was time to register it.

Unfortunately I foung out that the previous owner was still registered.

What is the procedure to undo the previous registration?

Thanx a lot

George Kakavas

Recording Music

support@line6.com — Wed, 18 Nov 2009 12:54:42 GMT

Hello,

I bought the line 6 pod farm for my boyfriend so he could record his music and burn it to a CD. When I went to Guitar Center, that is what I told them I was trying to do and they sold me the Line 6 Pod farm. And while he absolutely loves it and all that he can do with it, he still cannot seem to get it to actually record his playing to his computer in any format that can be shared or burned to a CD. Is he missing a step or is he missing some other system or program that is needed to actually be able to accomplish that part?

Thank you!!!

I bought a podxt recently and was going to do some updates and it said it required a cd of somesort to complete the update. My podxt didn't come with a cd. Where can I get one so I can update and get some add onns?

support@line6.com — Sat, 21 Nov 2009 19:50:41 GMT

I bought a podxt recently and was going to do some updates and it said it required a cd of somesort to complete the update. My podxt didn't come with a cd. Where can I get one so I can update and get some add onns?

pod xt display goes blank (unable to view settings)

support@line6.com — Sat, 21 Nov 2009 19:16:45 GMT

My pod xt display works fine then goes blank then works again then goes blank and so on.

It is very frustrating. What can I do?

pod 2.0 eprom update

support@line6.com — Sat, 21 Nov 2009 17:32:12 GMT

Hi! Is there still avaliable the Eprom update to POD 2.3 or 2.54?

If so, How can I get one? i´m in spain

thank you very much