How to resolve a blank screen on a PODxt LIVE

If you are getting a blank screen on your PODxt LIVE please try the following steps.

1. Turn off the POD

2. Turn on the POD while holding down the Save and Edit buttons simultaneously

3. The POD's LCD screen should display Init Edit Buffer

4. Push the Output mode button

5. Turn the Select / Select Page knob one click to the right

6. Turn the Effect Tweak / Change Value knob to the left or right adjusting the contrast.

If it does not solve the issue. Please consult an authorized Line 6 Service Center.

I purchased a MODEL PACK and can't find any of the new features on my device.

Please run LINE 6 MONKEY and go to the OPTIONAL ADD ONS tab. Please make sure that your model pack(s) has/have a green check mark next to it. If you do not see a check mark, please do a refresh in LINE 6 MONKEY. Click on the OPTIONAL ADD ONS tab, click on MODEL PACKS, click on ACTIVATE PURCHASE, then type in the word "refresh" (no " marks).

If this does not work, please try to type in your license key again. If you forgot that #, please log on to our website, click on MY ACCOUNT, and then go to license keys. After you see a green check mark(s) next to your model pack, please check under the respective locations to find the added AMP or EFFECTS models.          

Note: The installation of your model pack will not add presets to your device/program, it will add more AMP or EFFECTS models.

I am trying to set up my POD XT Live and on the what are you connecting to screen I cannot get it out of Studio/Direct mode.

When headhphones are plugged in, the POD XT Live defaults to Studio/Direct mode. Please unplug the headphones and it should give you the other connection options.

Q: How do I calibrate the pedal on my PODxt Live?

A: Setting the calibration on your PODxt Live pedal is simple. Just follow these steps:

1. Make sure there is nothing connected to your PODxt live aside from the power cable.

2. Power up the PODxt Live while holding down the Bank Up switch.

3. Press the Amp button to zero current settings.

4. Move the pedal all the way to the heel back position, then all the way forward until the toe switch clicks. You will want to stand up and shift all of your weight to the toe position until you see the WAH light turn on.

5. Wait 10 seconds, then power the PODxt Live off and back on again.

6. Your pedal is now calibrated.

Q: What type of pedal should I use for the external expression pedal?

A: The Line 6 EX-1 is the pedal recommended for use with all Line 6 gear.  You should be able to use any expression pedal with a 10K potentiometer if you do not have an EX-1 available.

Q: Can I calibrate the external expression pedal?

A: There is no calibration method for the external expression pedal.