If you qualify for the free POD Farm plug in upgrade (the Annual GPO subscription purchase with "free GearBox Plug-In" special offer does NOT apply), please see the steps below on how to activate.

1. Connect your Line 6 device to your ONLINE computer via USB. Launch the Line 6 Monkey software. Make sure that you have installed the latest drivers for your device through Line 6 Monkey.

2. If you qualify for the free upgrade Line 6 Monkey should immediately offer up the following message:

3. Click "OK" and then click on the "Activate Features" button located in near the bottom right corner of the screen.

4. Line 6 Monkey will establish a connection to our server and begin to program your hardware.

5. Once Line 6 Monkey is finished programming your hardware, it will alert you to unplug your device via USB for 5 seconds and then replug it back in.

6. You should now see a green circle with a white check mark inside it located near POD Farm in the list of activated packs. At this point, if you have not downloaded the POD Farm application from our website please do so at www.line6.com/software.

PLEASE NOTE: If Line 6 Monkey does not offer you the "Activate Features" button automatically then please do the following:

1. Navigate to the Optional Add Ons tab in Line 6 Monkey

2. Click on the "Activate Purchase" button

3. When the license key field opens up type the word "refresh" in the field WITHOUT THE QUOTES.

4. Press "Activate"

5. Line 6 Monkey will connect to our server and refresh your device giving you your free upgrade to POD Farm.