Community: Message List

Pod hd500 problem - Patches die

support@line6.com — Thu, 11 Apr 2013 05:19:00 GMT

Hi. I have had a problem with my pod hd500 (happens in every setting in every user. Have tried restoring the pod). The problem is that when im am on the patch, the pod suddendly sends out a loud noise (feedback) like, and then its no sound coming from the pod. I can easily get the sound back by, switching patch and going back to the original patch, but still, this it very annoying. I hppens like every month. My guitar dosent need to have the volume up, it just happes at random. Its not that often, but its still very frightening to play live because of that. Any tips?

Sound stopping from my pod hd500?

support@line6.com — Wed, 06 Jun 2012 16:45:18 GMT

Hi i got a big problem with my pod hd500... When im on my drive-patch (fs6), sometimes the sound dissapears. If i switch back to another patch, and back again, the sound is there again. When it hapens, the volume raises for a second or two, and i get no sound. It happened like two months ago, but it hapened today and yesterday. It makes me a little worried. I have noticed that all the times it happened was after i just changed the settings, before i clickked save. Please help!

Cant autorize pod farm2?

support@line6.com — Fri, 20 Apr 2012 07:28:04 GMT

Hi. When i go to pod farm 2 i get the message that my computer is not autorized , so it will run in trial mode. I also get asked if i want to run license manager and autorize. When i go to licence manager, it says that my computer is already autorized. (I have pod ux1 by the way) Please help me!!

New Line 6 amplifiers with L6 link?

support@line6.com — Sat, 14 Apr 2012 11:25:23 GMT

So im thinking about buying a DT25 tomy POD HD500, however, does anybody know if its any other amps out there that has L6 link, or that Line 6 is coming out with some new amps with L6 link. The DT25 is alittle to expensive with me.

Ratteling noise trough amp/headset with pod hd500?

support@line6.com — Mon, 06 Feb 2012 14:35:38 GMT

So if i pick hard or strum a chord, i get this ratteling noise trough my amps/headphones (i have tried several amps, guitars, and headsets).

I use pod hd500 and it happens most noticebale on a clean patch. Please help me! It sounds alot like a snare drum ratteling.

Please help me!!

Guitar picking up noise from my pod hd500?

support@line6.com — Wed, 01 Feb 2012 20:59:01 GMT

So if i my guitar is a meter/half meter close to the screen of my pod hd500, i get this horrible uneven high pitch buzzing noise, however, if i move away from the pod a little i hear no high pitch hum (this happens both at clean and crunch, and i use a noise gate). I have 2 electric guitars and its the same issue, if the pickups are pointing against the pod, the noise gets louder, but if i move away a little, the noise stops. This is very annoying if im sitting in a little place. It seems that the noise comes easyer if i use headphones. If i play trough my amp, i need to have the guitar at least 10 inches near to hear the noise. So basicly, the pickups of my guitars is picking up signal/ whatever from the pod, and i hear this trough my headphones, is it problem with the pod or guitars or what?

Sound cuts off in pod hd500?

support@line6.com — Sun, 08 Jan 2012 18:38:52 GMT

So when i plug usb from my pod hd500 to my pc and play everything is fine, but when i record, listen to music from the pc or whatever, the audio starts to cut of, and make theese small annoying noises, i even hear it on the recording when i record myself!

Conected to an amp, i have no problems.

I had the same problem with my pod ux1, but i could change the buffer size or whatever in pod farm.

Can please someone help me?

Noise in pod ux1?

support@line6.com — Mon, 26 Dec 2011 17:34:34 GMT

So when i play everything goes at normal, but suddenly a wall of noise (very loud) comes trough my headphones.

This is a very painfull experience.

Does enybody know how to fix it?

I have set the default buffer size to full(otherwise the sound keeps cutting out)

Pod Ux1 dosnt work with microphone??

support@line6.com — Thu, 13 Oct 2011 15:11:37 GMT

So i bought a Pod Ux1 and installed all programs that was included in the box. Thhe only thing i want to do whit the pod, is to use the pod as a external soundcard.

The problem is that when i connect my shure sm57(dynamic microphone) into the microphone input to the pod, it dosnt record anything. I have gone into computer settings, and set my pod as the recording devivice, but when i talk into the microphone it dosnt show any soundwaves. It still says that the pod is working.

My recording program is called Reaper. I have set the pod as my recording device there to, but it dosnt record any sound when i talk into the microphone. I have set the mic-input at full.

If i plug my guitar directly into the pod, it does record, but i dont want that, i want to use my microphone.

If someone helped me with this, i would be very thankful.