Community: Message List

Re: Serious problem with HD500. solved for while

support@line6.com — Sun, 24 Apr 2011 05:23:48 GMT

so, DSP
the line6 offers up a whole lot of sound possibilities in POD HD500, and it can take some serious Digital Signal Processing (DSP) to run these goodies. Rather than limit your creative potential with fewer Models or signal routing options, we chose to implement a “Dynamic DSP” system, which dynamically assigns DSP resources to accommodate your tone configurations. When creating a tone that utilizes several heavy-hitting DSP Models, it is possible to surpass the amount of processing power available. In these cases, you’ll see the DSP LIMIT REACHED indicator appear, and the current Model is bypassed to allow your tone to remain active.
Currently selected Model is automatically bypassed, with DSP message shown here DSP Limit alert is temporarily displayed
Signal Flow View - displaying DSP Limit alert
In the above example, trying to change the Model for a 2nd Amp placed our tone over the DSP limit. Therefore, the DSP LIMIT REACHED message is shown temporarily, and the Amp B Model we selected is automatically bypassed, as indicated by the DSP Over message. When the DSP Limit is reached, you have a few options to free up DSP resources.
• Try using different Amp Models. Some of the HD Amp Models require more DSP power than others, so try switching to a different Amp Model.
• Use only one Amp Model rather than two.
• Try toggling Amp and/or FX Models “Off” or set the Block’s Model to “None,” (see “FX Blocks” on page 3•1). Some FX types, such as Pitch Shifters and Reverbs, utilize DSP more heavily.
Note: Setting an Amp or FX Block to “None” more greatly reduces the Block’s DSP usage than toggling its Model to “Off.”
• Once you’re happy with your customized tone, save it so that you can recall it later.

I hope be helped you

Eliezy Guittar

Re: Pod HD500 crashed solved for while

support@line6.com — Sat, 23 Apr 2011 20:51:58 GMT

I managed to solve the problem, just holding two buttons."TAP footswitches" and "ENTER amp&fx on/off " buttons, he returned to the home screen with 1A: Son Of Plexi showing in LED POD HD500, but the engineers at Line 6 have to solve this problem with new FLASH i did the upgrade FLASH 1.22, and got the same problem, and i discovered that the problem is something related to the DSP,cuz i made a patch with the greatest effect possible to be with good sound synthesized, and when i turn on my FS2 and FS3 footswitches for example, it turns itself off the screen showing the LINE6 every 5 seconds, then again I did just holding two buttons."TAP footswitches" and "ENTER amp&fx on/off " buttons, he returned to the home screen with 1A: Son Of Plexi showing in LED POD HD500 solving the problem .. so, i have helped, i'm from Brazil my English is a little weak, but i hope you understand well

Eliezy Guittar

Re: Pod HD500 BSOD Crash solved for while

support@line6.com — Sat, 23 Apr 2011 20:51:08 GMT

Eliezy Guittar

Re: My POD HD500 malfunctioned after use with POD HD500 Edit. solved for while

support@line6.com — Sat, 23 Apr 2011 20:49:49 GMT

Eliezy Guittar

Re: POD HD 500 Crashed. Please Help. solved for while

support@line6.com — Sat, 23 Apr 2011 20:48:13 GMT

Eliezy Guittar

Re: Serious problem with HD500. solved for while

support@line6.com — Sat, 23 Apr 2011 20:47:32 GMT

Eliezy Guittar