Community: Message List

Re: RE: Possible to get the Echo Park Mutli 2 on the M13

support@line6.com — Mon, 01 Aug 2011 18:15:47 GMT

thanks for the response... could i suggest that this effect be included in the next firmware release (not sure if my tech speak is accurate here).. would be great if the higher end models had all features that the lower end models had so that if someone was upgrading over time, like myself, they wouldnt lose any functionality. have a number of tunes based on the multi settings and might have to keep the echo park in my rig as a result... was trying to downsize!

Will post the settings for the multi 2 shortly so that everyone can dial it in.

Cheers

Possible to get the Echo Park Mutli 2 on the M13

support@line6.com — Mon, 25 Jul 2011 14:36:29 GMT

Hi there,

I recently upgraded to the M13 and i was wondering if its possible to dial in the Multi 2 effect from the Echo Park pedal?

I've been able to get something similar using two delays in series but really need to have it in saved in just one 'multi head' delay.

Is this possible... if so can you share the settings please?

Many thanks..

Kieran

Re: RE: DL4 not working - LEDs A & B flashing

support@line6.com — Thu, 07 Jan 2010 09:58:33 GMT

Thanks Perry... I'll look into what service centre is closest.

Cheers,

Kieran

Re: RE: DL4 not working - LEDs A & B flashing

support@line6.com — Wed, 06 Jan 2010 09:45:27 GMT

Hi Perry,

Thanks for your response. I purchased the delay pedal in the US and I still have the receipt which has the date of purchase on it. Will Line 6 UK still help me out or do I need to contact someone in the US for assistance? It was purchased in Colorado Springs.

Many thanks,

Kieran

DL4 not working - LEDs A & B flashing

support@line6.com — Sat, 02 Jan 2010 18:18:05 GMT

Hi there,

My DL4 stopped working mid way through use a few days ago. It would not respond to any switches being pressed. Now when I turn it on LEDs for swithes A & B flash in a sequence of A once and B three times and the effects to not work. However, I tried turning the unit on in alternate bypass mode and also resetting the factory presets. When I do this it the effects seem to work but again the switches to not work.

I see from other posts / questions on this site that this is potentially due to a faulty switch. My question is - can I get the switches replaced or sent to me free under the warranty as it is less than one year old and if I replace the switches myself does this affect the warranty in any way?

Incidentally, I have tried to use an expression pedal with this unit following the instrutions in the manual but it does not seem to work at all. Any advice here? Perhaps there is something I am missing.

Many thanks for your help,

Kieran