Community: Message List

Re: Help! How to create custom tunings on workbench and transfer to JTV?

support@line6.com — Sat, 02 Jun 2012 03:35:26 GMT

Hi Perry,

Thanks for the reply. I got a support ticket and directed my questions there.

Re: RE: Cannot sync custom tunings via Workbench to JTV

support@line6.com — Sat, 02 Jun 2012 03:34:27 GMT

Thanks Hugo, I have replied in the ticket.

Help! How to create custom tunings on workbench and transfer to JTV?

support@line6.com — Thu, 31 May 2012 15:52:54 GMT

I posted my problem earlier but no answer so far so I'm asking again. Thank you in advance for any help :-)

Re: Cannot sync custom tunings via Workbench to JTV

support@line6.com — Tue, 29 May 2012 04:06:16 GMT

Thank you for the suggestion. I think I have the latest Java in my computer (Java SE6, both 32-bit and 64-bit, version 1.6.0_31-b04-415) as there is no more update for it at the moment. Thanks for the link too but I am using a Mac with OS X10.7.4.

Re: Cannot sync custom tunings via Workbench to JTV

support@line6.com — Tue, 29 May 2012 03:59:37 GMT

I am sorry for the confusion. I hooked up the variax with the computer via the provided USB hub. The Workbench detected the guitar and I could load the models from the guitar to the workbench. After I edited two of the models in the Custom 1 folder (created a couple guitar model with different alternate tunings), the yellow exclaimation signs appeared next to the newly created models and the sync button at the bottom. I pressed the 'Sync" button, a window popped up asking me if I wanted to write the two modified models to the variax, I clicked yes and the error message appeared.

I tried to work around this problem by backing up all the models on the computer, then I edited two of the models in the Custom 1 folder and saved them in the backup. After that I loaded all the backup models to the Variax, without the error message this time. However, the guitar models I edited were transferred to the variax but the alternate tunings were not.

I did not have any line 6 programs in my computer prior to the above process. I installed the latest version of Monkey and updated the variax's firmware, then I installed the latest version of Workbench before hooking it up with the guitar.

I hope I have explained it more clearly and I thank anyone for any help. I really would like to be able to create a customised model with its own alternate tuning.

Thank you,

Karissa

Cannot sync custom tunings via Workbench to JTV

support@line6.com — Mon, 28 May 2012 09:11:56 GMT

I just bought the JTV59, updated to firmware 1.82. I am trying to set up a guitar with a particular tunnig (Baritone nashville) with workbench, I managed to get the guitar model into the Custom 1 slot but the custom tuning could not be synced. I received an error message every time I tried to sync:

An exception was caught.

cmn.l6java.patch.L6PatchManager$DeviceNotConnectedException: null

App info: Variax Workbench 1.73 release - build 120 - Thu Mar 8 14:53:29 PST 2012

Date: 5/28/12 5:00 PM

In thread: L6Thread - 'Sync Device - task' - started at line6editbase.app.L6EditorApp.StartDeviceTask - line -1

OS: Mac OS X (10.7.4 i386)

Java VM Version: 1.6.0_31

Stack trace:

cmn.l6java.patch.L6PatchManager$DeviceNotConnectedException

at cmn.l6java.patch.L6PatchManager.AcquireDevice(Unknown Source)

at cmn.l6java.patch.L6PatchManager.BeginSendPatchBlock_Sync(Unknown Source)

at cmn.l6java.patch.L6PatchManager.BeginPatchBlockSend(Unknown Source)

at cmn.l6java.patch.L6PatchManager.Synchronize(Unknown Source)

at cmn.l6java.patch.L6PatchManager.Synchronize_Write(Unknown Source)

at line6editbase.app.L6EditorApp$SyncDeviceTask.DoTask(Unknown Source)

at line6editbase.app.L6EditorApp$DeviceTask.Task(Unknown Source)

at cmn.l6java.core.L6MonitoredTask$TaskThread.Run(Unknown Source)

at cmn.l6java.core.L6Thread.run(Unknown Source)

Since there is no manual for workbench and I have looked at all those workbench alternate tuning problems, I am still at a lost how to proceed and have to write to get help from Line6.

Thanks.

Re: RE: X3 Live 8000900C error

support@line6.com — Wed, 25 Nov 2009 06:24:56 GMT

Hi,

I connected my X3L with the windows laptop again and it worked fine. I used the same USB port so there might be some hardware issue the other day when I got the error message again and again.

Thanks for all the advice, really appreciate that.

Re: RE: Default Wah Model

support@line6.com — Mon, 23 Nov 2009 15:15:13 GMT

THanks, I think it sort of answered my question. If I understand the solution correctly, the wah model has to be pre-selected in each patch first if I want a different model. I was thinking perhaps the global setting for the wah medal could somehow be changed.

Thanks for clarifying that.

warm regards,

Karissa

Re: RE: X3 Live 8000900C error

support@line6.com — Mon, 23 Nov 2009 15:05:01 GMT

Thanks Perry, I'll let you know ASAP.

Re: X3 Live 8000900C error

support@line6.com — Mon, 23 Nov 2009 15:04:04 GMT

Big thank you to everyone who responded. I am sorry for being away from the internet for a few days; been busy rehearsing and gigging (so that I can afford more line6 products ).

I have not tried the connection with my windows laptop yet. The X3L works fine with my mac and my problem is not about the USB connection as it worked before with the same set-up. I will try again tomorrow (I am in Hong Kong) and if it does not work, I will try uninstalling all line6 programs and reinstall them.

I will definitely post what happen here.

Once again, thank you everyone!!

warm regards,

Karissa