Community: Message List - Toneport UX1 Software Downloads

Re: Toneport UX1 Software Downloads

support@line6.com — Thu, 04 Oct 2012 22:48:04 GMT

ok. so i am a registered owner of a UX1. my computer died. i now have a new one but cannot find my software disk. would very much like to start using my UX1 again but can not if i don't have disk. can any one help? because Line 6 don't seem to have an answer.

Re: Toneport UX1 Software Downloads

support@line6.com — Wed, 10 Jun 2009 10:15:59 GMT

bassfreak67 wrote:

I'm not sure if this is what is doing it, and i tried both without the () and with them and neither worked.

i think you're missing the point.

if your serial number is 21UX20S1111009876, then you take off the 21UX2, and only enter the 0S1111009876 into the box. you don't need to worry about entering the (21)UX2 at all, as you said you tried it with and without the brackets, I guess you're entering too much of the code.

Re: Toneport UX1 Software Downloads

support@line6.com — Tue, 09 Jun 2009 19:47:09 GMT

Thanks to all for your help.

I have never registered the Toneport, so it couldn't be that. I've never made an account, and I'm the original owner.

I did notice that when I picked the Toneport UX1 on the type list, it automatically picked the first 6 or 7 numbers/letters in the serial for me. However, it read them as 21UX100 instead of (21)UX100 (of course theres more than this in the serial haha but im not posting that). I'm not sure if this is what is doing it, and i tried both without the () and with them and neither worked.

As far as the software, I was able to get Gearbox and Monkey off the site, and it's working just fine! I'll see if I can find a "working" version of Ableton somewhere, so I guess if I can find that there's really no need to reg this product.

Thanks again guys!

Re: Toneport UX1 Software Downloads

support@line6.com — Tue, 09 Jun 2009 19:43:02 GMT

Hello,

Sometimes letters and numbers can be interchanged when inputing serial numbers and cause registration errors. See the following link:

Line 6 Product Registration F.A.Q.

http://line6.com/community/docs/DOC-4283

For your software, please go the following link to download/install the latest Gearbox software for your Operating System, which also includes the Line 6 monkey intelligent updater and the latest drivers for your Line 6 product.

http://line6.com/software/

See the following links for additional Line 6 software information:

Line 6 Monkey Installation and F.A.Q.

http://line6.com/community/docs/DOC-3898

Installing Drivers For Your Line 6 Device

http://line6.com/community/docs/DOC-4427

Gearbox Program manual

http://line6.com/community/docs/DOC-4839

Use the information in this link to optimize your computer to work with Line 6 Gear:

Computer System Audio Optimization

http://line6.com/community/docs/DOC-4201

See the following information for setting up your Line 6 device as the soundcard on your computer:

Setting up your Line 6 device as External Sound Card within Windows XP: Video

http://line6.com/community/docs/DOC-1427

Assigning your Line 6 Device as a Sound Card on your Windows XP Computer

http://line6.com/community/docs/DOC-1452

Assigning your Line 6 Device as a Sound Card on your Windows Vista Computer

http://line6.com/community/docs/DOC-1453

Assigning your Line 6 Device as a Sound Card on your Mac Computer

http://line6.com/community/docs/DOC-1454

Re: Toneport UX1 Software Downloads

support@line6.com — Tue, 09 Jun 2009 19:26:14 GMT

lol, ok you're right

but there is a difference between using a trial for longer than you should, because the developer chooses to let the product still be used past the 30 days, and blatently getting cracked software or using someone elses code, which bypasses the security features that the developer chooses to put on their software to stop you using it.

but I do hear you, reaper isn't really free.

Re: Toneport UX1 Software Downloads

support@line6.com — Tue, 09 Jun 2009 18:43:32 GMT

Rowbi wrote:

okay so it's not free, but in version 2 it just puts a banner up every time you open it even after the 30 days, then you can clear the banner after a few seconds and still use it, in fully featured mode. that's still technically against the license adgreement, but for someone who only records something once in a blue moon, who cares. for anything more than that then the $60 is well worth it for the features, and the frequency of bug fixes.

Mmmmhhhh....

You're right.

But maybe he is used to the Ableton software. Let me see what I can do. I bet that I can Google a working cracked free version of Live Suite 8 in less than 15 minutes.

Re: Toneport UX1 Software Downloads

support@line6.com — Tue, 09 Jun 2009 18:17:42 GMT

okay so it's not free, but in version 2 it just puts a banner up every time you open it even after the 30 days, then you can clear the banner after a few seconds and still use it, in fully featured mode. that's still technically against the license adgreement, but for someone who only records something once in a blue moon, who cares. for anything more than that then the $60 is well worth it for the features, and the frequency of bug fixes.

Re: Toneport UX1 Software Downloads

support@line6.com — Tue, 09 Jun 2009 17:18:28 GMT

Rowbi wrote:

you could use something like reaper for your recording software, as many use this, and it'sa free product (apart from the banner when you open it). http://www.reaper.fm/

Not free.

http://www.cockos.com/reaper/purchase.php

Reaper stopped being freeware at version 1.0.

Re: Toneport UX1 Software Downloads

support@line6.com — Tue, 09 Jun 2009 09:06:02 GMT

when you register the device, it wont let you register it, if it's been registered to another user account. so perhaps it's erroring because you already registered it before with an old account you have forgotten about. the other reason I can think of is that there will be 2 UX1's in the list to register, one will be the toneport, and the other will be the POD Studio. ensure you select the toneport UX1 and not the pod stdio as the serial numbers start differently.

the gearbox installer has the drivers included in it so the only thing I guess you're missing is the ableton live lite software, which I'm not sure you can get hold of again if you've lost it. it's definately not available to download on this site as it's not made by line6.

you could use something like reaper for your recording software, as many use this, and it'sa free product (apart from the banner when you open it). http://www.reaper.fm/

i hope this helps you.

Toneport UX1 Software Downloads

support@line6.com — Tue, 09 Jun 2009 03:12:43 GMT

Hello,

I had purchased a Toneport UX1 about 2 years ago, and recently have gotten it back out to start recording again.

I came across a problem when I couldn't find the Installation CDs, however I do have the Toneport itself.

I tried to register my product on the site, but for some reason the serial number wasn't recognized.

I can see the serial number clearly on the Toneport, so it's not an issue of whether the numbers/letters are faded, the site just won't recognize my SN.

I did find a download for Gearbox, but can't find any drivers or the recording software ( I can't remember the name of it) anywhere on the site.

I'm basically just trying to get all the files from the CDs back so I can start recording again.

Thanks ahead!