Community : Discussion List - Studio Modelers / AM4

Echo Pro Documents (Preset Chart)

support@line6.com — Fri, 02 Mar 2012 22:15:17 GMT

I've misplaced my preset guide that came with my Echo Pro. I can't find any documents online for the chart (the laminated one that goes through factory presets and what the expression pedal controls). Does anyone have a digital copy or can someone scan this for me please?

Thank you!

How to stop "digital spillover" when changing patches on Echo Pro

support@line6.com — Tue, 06 Nov 2012 06:16:18 GMT

Hi...I am running my Echo Pro (love it) between a preamp (Egnater M4) and a Randall RT2/50 tube power amp. It sounds insane except for the following small issue.......when I change switch channels and the delay patch changes, there is a (for lack of better words) digital sounding spillover or warping sound. Is there a way to set the unit so the effect is cut off when I make a switch? It seems like it would have to do with "ducking", however I am not sure, nor am I sure on what to do program wise. Any help would be awesome...thanks! Rick

Echo Pro with Midi Mate controller

support@line6.com — Sun, 08 Apr 2012 02:50:34 GMT

Got an echo pro hooked up to a Rocktron midi mate controller, but the patch numbers are not in sync.

Is ther any way this can be offset so they are in sync?

toneport ux8

support@line6.com — Tue, 13 Dec 2011 16:52:37 GMT

hola compañeros:

tengo un toneport ux8 que recientemente he comprado. Mi problema es que no se si esta estropeado o que no se usarlo y me gustaria informarme antes de nviarlo a reparar. E problema es la segunda salida de auriculares, no se escucha nada. Intento conectar dos instrumentos a la vez por los canales 1 y 2 , el auricular 1 se escucha correctamente, pero el 2 , en el cual esta escrito 3-4, no aprecio ningun sonido.

Mi pregunta es:

¿tengo que configurar algo mas? (En el apartado "line 6 audio- midi devices" tengo las entradas 1 y 2 para instrumentos y las demas para microfonos)

¿está estropeado y tengo que enviarlo a la tienda?

Help with MIDI control of Bypass and Program select please?

support@line6.com — Fri, 07 Oct 2011 02:42:21 GMT

Hi,

love the sounds of the DL4 - just aquired an Echo Pro and would like to understand how to use bypass and program changes from a sequencer:

I have created a midi track in Logic and put some PCs in - I start with 007 in measure 1 and then follow it with 000 (enable bypass) in say bar 2.

I start playback for the first time and, great, the Echo Pro switches to program # 7 then the bypass button lights up with the 000 in bar 2.

All is well methinks!

But, when I start the track again from the beginning, the 007 has no effect, it stays in bypass mode.

Help!

What am I doing wrong?

Thanks in anticipation for any help.

Patrick

SW Florida

Midi foot controller to Echo Pro

support@line6.com — Fri, 30 Apr 2010 08:14:35 GMT

Dear Support!

I am a very satisfied owner of a Echo Pro, which I use mainly for looping, it sounds and works great!

But I need a midi foot controller, either just a small one with 2 buttons for record & stop or maybe a larger one with expresson pedals

What do you recommed?

Kind regards

Nikolaj Wolf

Bypass toggle help?

support@line6.com — Sat, 16 Apr 2011 22:22:50 GMT

Hi all - I have a FilterPro in a midi controlled loop switching system (DMC/Voodoo Labs GCX with Ground Control Pro floorboard).

I DO NOT have a midi controller assigned to the FilterPro's bypass function (obviously, I don't need to, I switch it in and out of the signal path with the GCX) - HOWEVER: sometimes the very act of changing programs via my MIDI floorboard puts the FilterPro into bypass mode and I have to send the program change again to engage the effect.

I see in the FAQ that this dance will be necessary IF I have the bypass assigned to a midi CC, but I don't - why is it doing this? Is there any way around this problem?

Thanks in advance!

Manual for Pro Mod and Pro Filter?

support@line6.com — Wed, 23 Feb 2011 18:38:21 GMT

I need to get a manual for my pro mod and pro filter, how do i do that?

Filter Pro not turning on??

support@line6.com — Wed, 26 Jan 2011 23:08:02 GMT

I recently bought a used filter pro and set up for the first time and was working great, then the second time I came back to try to turn it on and get no power at all?? Do you think it can be fixed?

Delay Time Glide and Firmware

support@line6.com — Mon, 06 Dec 2010 21:49:00 GMT

Hello,

I have an Echo Pro which has a feature called Delay Time Glide (GL). It makes an audible glide sound as it moves to the new tempo from preset to preset. I don't like this, so I turn it off. When I turn the unit off or when I've been using it for a while, it will turn ON automatically. Not sure why, but I'm wondering if there's a fix.

I'm assuming this is a new feature (right before the unit has been discontinued) because it's not in the manual. Since this is faulty, can I load an earlier firmware to correct this problem?

Please let me know.

Thanks,

Steve

Filter Pro stopped working. Please help!

support@line6.com — Sun, 21 Nov 2010 18:03:31 GMT

Hello!

My Filter Pro have stopped working. I've been tweaking it with midi controller and suddenly it stopped responding to commands.

I've tried to turn it off, but it didn't react on power button (lights were still on).

I've removed the power cord and tried to power it up again - with no result.

Please tell if there a way to reset it somehow? I've been reading here http://uk.line6.com/community/thread/6142;jsessionid=91D999F83F27C3605BFCBC04AB193F0B that FM4 can be reset in such situation.

This unit is at heart of my production and it's crucial for me to bring it back to life. I know that these units are not supported anymore, but please, answer.

There are no official line 6 service centers in my area so you are my only hope.

Also, is there a way to re-program firmware in case if reset doesn't work?