XD-V Digital Wireless Microphones

Hello, Line 6ers.

We have gone live with a new forum platform at http://line6.com/support/index. Please go there for your discussions and question for our community. Our previous forums are read-only at this time.

Thanks for your patience during this transition. We're confident that the new forum platform will help make your Line 6 experience a great one.

Line 6 Customer Service

If you have recently purchased a Relay G50/90 wireless system, it has come to our attention that a small number of systems may have been shipped starting in the wrong RF mode.  This is very easy to resolve.  If your new Relay G wireless system’s transmitter will not connect to its receiver, switch the RF mode by following the procedures below:

For TBP12 bodypacks:

1. Turn body pack power on

2. Press and hold the "Select" button until the channel number flashes

3. Press and release the "Value" button while continuing to hold the "Select" button.

4. Release both buttons when the display shows "RF1".

5. Verify by powering off the unit then turning power back on and watching for RF1 to be displayed during the turn on sequence.  Your transmitter will now connect to your receiver.

More information is available at the following link: http://line6.com/support/docs/DOC-2798

As many of you have seen by now, our forum communities were SPAMMED, starting on March 3. Since we were made aware of it, we attempted to address the issue in a number of different ways. As a last resort, we've restricted the ability to post to the forums to accounts created before the SPAM started. We do plan to allow full access to all users in the coming weeks.

If you have a technical question that our documentation does not answer, please create a support ticket at http://line6.com/support/.

We truly apologize for any inconvenience this issue may have caused you.

Line 6 Customer Service