Skip navigation

This is an archived version of the document. The current version can be viewed here.

Currently Being Moderated

Tone File Type Compatibility Chart

VERSION 1 
Created on: Aug 5, 2011 1:01 PM by ricksox - Last Modified:  Aug 5, 2011 1:49 PM by ricksox

Below is a table that calls out tone file type compatibility between Line 6 hardware and software.

 

 

POD 2.0 TechnologyRecommended EditorTones Compatible WithNot Compatible withExceptions
POD 2.0Line 6 EditPOD 2.0,POD Pro, Flextone IIPocket POD, FloorPOD Plus, PODxt, POD X3, Flextone III, HD147, Vetta, II, POD HD, Spider IV, Spider Valve MkIIVyzex Editor will accept POD 2.0 tones however Line 6 Edit will not accept Vyzex Editor built tones.
POD ProLine 6 EditPOD Pro, Flextone II, POD 2.0Pocket POD, FloorPOD Plus, PODxt, POD X3, Flextone III, HD147, Vetta, II, POD HD, Spider IV, Spider Valve MkIINone
Pocket PODVyzex

POD 2.0, FloorPOD Plus, Flextone II, POD Pro

HD147, PODxt, POD X3, Vetta II, Flextone III, POD HD, Spider IV, Spider Valve MkIINone
FloorPOD PlusVyzex

POD 2.0, Flextone II, Pocket POD, POD Pro

HD147, PODxt, POD X3, Vetta II, Flextone III, POD HD, Spider IV, Spider Valve MkIINone
Flextone IILine 6 EditFlextone II, POD 2.0, POD ProPocketPOD,FloorPOD Plus, PODxt, POD X3, Vetta II, HD147, Flextone III,POD HD, Spider IV, Spider Valve MkIINone
Spider IVSpider IV EditSpider IV (15 and 30 Excluded)All Tones NOT created in Spider IV EditNone
Spider Valve MkIISpider Valve EditSpider Valve MkIIAll Tones NOT Created in Spider Valve EditNone





PODxt TechnologyRecommended EditorTones Compatible WithNot Compatible withExceptions
PODxt FamilyGearboxPODxt, POD X3, GuitarPort, POD 2.0, POD FarmVetta II, HD147, Flextone II, Flextone III, FloorPOD Plus, Pocket POD,Only SINGLE TONE X3 tones are compatible. Dual Tones not supported. Loading POD 2.0 tones into Gearbox will result in message stating that the tone may have been altered durign the imprt and additional tweaking may be necessary.
POD X3 FamilyGearboxPODxt, POD X3, GuitarPort, POD 2.0, POD FarmFlextone II, Flextone III, HD147, POD 2.0, Pocket POD, FloorPOD Plus, POD Pro, Vetta II, Spider IV, Spider Valve MkII, POD HDNone
VettaLine 6 EditVetta II, Flextone III, HD147, PODxtFlextone II, POD 2.0, Pocket POD, FloorPOD Plus, POD Pro, Spider IV, Spider Valve MkII, POD HDNone
Flextone IIILine 6 EditFlextone III, HD147*, PODxt*Flextone II, FloorPOD Plus, PocketPOD, POD 2.0, POD Pro, POD X3, Vetta II, POD HD, Spider IV, Spider Valve MkIINone
HD147Line 6 EditHD147, Flextone III, PODxt*Flextone II, FloorPOD Plus, PocketPOD, POD 2.0, POD Pro, POD X3, Vetta II, POD HD, Spider IV, Spider Valve MkIICompatiblity depends on amp models available in device. Line 6 Edit will offer up a substitute amp model in the event that a device does not contain the same model.





Tone Direct TechnologyRecommended EditorTones Compatible WithNot Compatible withExceptions
POD Studio/TonePortPOD FarmPOD Studio/TonePort, PODxt, POD X3, GuitarPort, POD 2.0Vetta II, Flextone II, Flextone III, HD147, Spider IV, Spider Valve MkII, POD HD, Pocket POD, FloorPOD PlusLoading POD 2.0 tones into Gearbox will result in message stating that the tone may have been altered durign the imprt and additional tweaking may be necessary.
GuitarPortPOD FarmGuitarPort, PODxt, POD X3, PODstudio/TonePort, POD 2.0Vetta II, Flextone II, Flextone III, HD147, Spider IV, Spider Valve MkII, POD HD, Pocket POD, FloorPOD PlusLoading POD 2.0 tones into Gearbox will result in message stating that the tone may have been altered durign the imprt and additional tweaking may be necessary.





POD HD TechnologyRecommended EditorTones Compatible WithNot Compatible withExceptions
POD HD500POD HD500 EditPOD HD500Any Tones NOT created in POD HD500 EditNone
POD HD400POD HD400 EditPOD HD400, POD HD300Any Tones NOT created in either POD HD300 or HD400 EditNone
POD HD300POD HD300 EditPOD HD300, POD HD400Any Tones NOT created in either POD HD300 or HD400 EditHD300 does not support all FX models that the HD400 does. If the tone file was built with said FX they will not show up on the HD300
POD HD DesktopPOD HD Desktop EditPOD HDAny Tones NOT created in POD HD Desktop EditHD300 does not support all FX models that the HD400 does. If the tone file was built with said FX they will not show up on the HD300





Variax TechnologyRecommended EditorTones Compatible WithNot Compatible withExceptions
Variax 300Variax Workbench

Variax 300, Variax 500, Variax 600, Variax 700, JTV 59, JTV 69, JTV 89

Variax Acoustic 700Alt tunings set on JTV will move over to older Variax models however once moved the user needs to conenct the older Variax to Workbench to adjust any alt tunings.
Variax 500Variax Workbench

Variax 300, Variax 500, Variax 600, Variax 700, JTV 59, JTV 69, JTV 89

Variax Acoustic 700Alt tunings set on JTV will move over to older Variax models however once moved the user needs to conenct the older Variax to Workbench to adjust any alt tunings.
Variax 600Variax WorkbenchVariax 300, Variax 500, Variax 600, Variax 700, JTV 59, JTV 69, JTV 89Variax Acoustic 700Alt tunings set on JTV will move over to older Variax models however once moved the user needs to conenct the older Variax to Workbench to adjust any alt tunings.
Variax 700Variax WorkbenchVariax 300, Variax 500, Variax 600, Variax 700, JTV 59, JTV 69, JTV 89Variax Acoustic 700Alt tunings set on JTV will move over to older Variax models however once moved the user needs to conenct the older Variax to Workbench to adjust any alt tunings.
Variax 700 AcousticVariax WorkbenchVariax 700 AcousticAny Variax Electric (Inlcuding JTV), Variax 300 Steel/NylonNone
Variax 300 Acoustic SteelN/AN/AN/AN/A
Variax 300 Acoustic NylonN/AN/AN/AN/A
JTV 59Variax WorkbenchVariax 300, Variax 500, Variax 600, Variax 700, JTV 59, JTV 69, JTV 89Variax Acoustic 700None
JTV 69Variax WorkbenchVariax 300, Variax 500, Variax 600, Variax 700, JTV 59, JTV 69, JTV 89Variax Acoustic 700None
JTV 89Variax WorkbenchVariax 300, Variax 500, Variax 600, Variax 700, JTV 59, JTV 69, JTV 89Variax Acoustic 700None


Misc. Notes:


- POD Farm 1 tones work with Gearbox when connected to X3 but not PF2 tones

- Tones created in POD Farm Plug-In will not load into Gearbox