Version Comparison: Using the Mobile In with GarageBand for iOS

1: Connect the Mobile In to your iPhone or iPad using the 30-pin dock connector.

2: Connect your guitar or other audio source to Mobile In:

• Connect the ¼” Tip Sleeve side of the cable into the output of your instrument, then Connect the 1/8" Stereo Male end of the cable to the ‘GUITAR IN’ on the Mobile In adaptor.

• Connect both of the ¼” Tip Sleeve cable connections to the left and right outputs of your audio source, then connect the 1/8" Stereo Male end of the cable to the ‘LINE IN’ on the Mobile In adaptor.

3: Launch GarageBand.

• From the Instruments Menu, select the Guitar Amp.

• From the Guitar Amp Screen, tap the guitar cable button in the upper left hand corner and turn the monitor on.

• From the Instruments Menu, select the Audio Recorder.

• From the Audio Record Menu Screen, tap the guitar cable button in the upper left hand corner and turn the monitor on.

• From the Instruments Menu, select the Sampler.

• From the Sampler Screen, tap the guitar cable button in the upper left hand corner and turn the monitor on.

For more information on using GarageBand checkout the the User Manual Here.

For a Video on Mobile In Connections, Click Here.