Q: What output on the StageScape M20d should I use for my monitor amp or powered monitors when I’m mixing?

A: Use a balanced XLR cable to connect the left and right XLR outputs labeled ‘Main Outs’ to the inputs on your monitor amp or powered monitors.

Q: How do I connect the StageScape M20d to my computer for recording?

A: Prior to connecting the StageScape M20d to your computer for recording, you will need to install the latest available Line 6 drivers from our of software page at the link below:

• http://line6.com/software/

Follow the on screen installer instructions to install the drivers correctly. Once the driver installer is complete, connect a USB cable from the USB port labeled ‘PC’ on the StageScape M20d to a USB port on your computer.

Q: Can I use condenser mics that require 48V phantom power with the StageScape M20d?

A: The StageScape M20d has phantom power available to XLR inputs 1-12. To activate phantom power, tap the Input/Output panel located in the top center of the setup, monitor, or perform screen and then tap the ‘48v’ button to the left of inputs 1-6 and 7-12 to activate phantom power for each row of inputs.

Q: Where do I plug in headphones to the StageScape M20d to monitor the mix?

A: The StageScape M20d includes a dedicated headphone output to allow you to closely and quietly monitor your mixes. Simply connect headphones to the ¼” headphone output of the StageScape M20d and adjust the level control labeled ‘Phones’ to control the headphone mix volume.

Q: How do I get a signal out of the Main Outs on the StageScape M20d?

A: For a overview of the StageScape M20d mixing process check out the StageScape M20d support video – ‘Out of the box to the first gig’ and our Creating a mix with the StageScape M20d tutorial.

Q: How do I use floor monitors with the StageScape M20d?

A: The StageScape M20d features four independent monitor outputs each with their own separate monitor mix. Simply connect balanced XLR cables from the ‘Monitor Outs’ A,B,C, or D to the inputs of your floor monitors.

Q: How many total inputs are there on the StageScape M20d?

A: The StageScape M20d includes 20 available input channels:

• 12 high-performance, digitally controlled, auto-sensing mic/line inputs
• 4 additional auto-sensing line inputs
• 2 digital streaming inputs direct from computer, USB drive or SD card
• 1 Stereo line input for integrating MP3 players or other sound sources

Q: Where can I find product manuals for the StageScape M20d?

A: All of the available product manuals for the StageScape M20d can be found at the link below:

• http://line6.com/support/manuals/stagescape

Q: Where do I register my new StageScape M20d?

A: Line 6 products can be registered to your Line 6 User account using the link below:

• http://line6.com/account/registergear/

Q: What type of footswitch can I use for the footswitch inputs on the StageScape M20d?

A: The StageScape M20d works with any ¼” Tip Sleeve footswitch.

Q: Is it possible to access two Stagescapes simultaneously (or switch between them) in the ipad app?

A: It will be possible for a single iPad to switch between two StageScapes for control.  It will not be able to control both simultaneously, but the user can select which StageScape to control at a time by selecting from a list of WiFi StageScapes that the iPad can communicate with.