Skip navigation

Version Comparison: TonePort/POD Studio: USB Audio Monitoring (No Sound From Computer's Built-In Speakers)

Comparing: Revision 5 » Revision 6


 
 
Color Key: Addition Deletion Change
Revision 5   By Kneehow at 3 years, 4 months ago Revision 6   By laplayantonio at 2 years, 1 week ago

Once you've installed the latest drivers for your Line 6 USB device on your computer's operating system, connect audio monitors/speakers to the audio outputs of your Line 6 USB device or use the headphone output jack. You can download the latest software from our website at the Downloads page.

 

The built-in soundcard output of your computer will not output processed amp/effect tones from GearBox/POD Farm software. Also, connecting the audio output from your TonePort/XT device into the audio input of your default soundcard will result in you hearing latency (short echo/delay). Please connect your computer speakers to the output of the TonePort/XT device and not your original computer's soundcard output.

 

Please see the pic below illustrating a correct setup and connectino example.

 

ux2.bmp

Once you've installed the latest drivers for your Line 6 USB device on your computer's operating system, connect audio monitors/speakers to the audio outputs of your Line 6 USB device or use the headphone output jack. You can download the latest software from our website at the Downloads page.

 

The built-in soundcard output of your computer will not output processed amp/effect tones from GearBox/POD Farm software. Also, connecting the audio output from your TonePort/XT device into the audio input of your default soundcard will result in you hearing latency (short echo/delay). Please connect your computer speakers to the output of the TonePort/XT device and not your original computer's soundcard output.

 

Please see the pic below illustrating a correct setup and connectino connection example.

 

ux2.bmp