Skip navigation

Version Comparison: Vetta 2.5 Known Issues

Comparing: Revision 1 » Revision 2


 
 
Color Key: Addition Deletion Change
Revision 1   By Line6Kevin at 4 years, 2 months ago Revision 2   By Line6Andy at 3 years, 1 month ago

Vetta II Post Delay Mix Issue

On some patches with POST DELAY active, you will notice that if you turn DELAY off/on, the perceived mix will jump to %100. Please follow the steps below when the problem patch is active to resolve this issue:

 

  • Select FOOT CONTROL.

  • Scroll to Page 4 that say PEDAL 1.

  • Use the black knob under DEST to assign PEDAL 1 to a different parameter (an fx you are not using on the patch),

Go to page 5 and if PEDAL 2 is set to POST DELAY MIX, follow the same instructions above.

  • Select SAVE twice to save the changes.

 

Gain/Drive Reversal When Using Line 6 Edit

  • Drive and gain for distortion effects are reversed when loaded into Line 6 Edit: After loading a tone or changing the model selection, the drive and gain values for distortion effects are reversed when comparing the amp display to Line 6

edit. When adjusting the drive or gain using Line 6 Edit or the amp, the correct control moves and jumps to match the value of the one you are moving.  This effects all distortion effects, and also happens when loading a tone.

Vetta II Post Delay Mix Issue

On some patches with POST DELAY active, you will notice that if you turn DELAY off/on, the perceived mix will jump to %100. Please follow the steps below when the problem patch is active to resolve this issue:

 

  • Select FOOT CONTROL.

  • Scroll to Page 4 that say PEDAL 1.

  • Use the black knob under DEST to assign PEDAL 1 to a different parameter (an fx you are not using on the patch),

Go to page 5 and if PEDAL 2 is set to POST DELAY MIX, follow the same instructions above.

  • Select SAVE twice to save the changes.

 

Gain/Drive Reversal When Using Line 6 Edit

  • Drive and gain for distortion effects are reversed when loaded into Line 6 Edit: After loading a tone or changing the model selection, the drive and gain values for distortion effects are reversed when comparing the amp display to Line 6

edit. When adjusting the drive or gain using Line 6 Edit or the amp, the correct control moves and jumps to match the value of the one you are moving.  This effects all distortion effects, and also happens when loading a tone.