Jump to content


Announcement: Connection issue on some new Relay G50/90 units, with resolution


Posted by Line6Tony


Line6Tony

    Line 6 Staff

  • Administrator
  • 2161 posts

Should your system not function initially, it could be that your transmitter has been set to a different RF mode. Please see the instructions below on switching RF modes on the TBP12 Transmitter:
  • Turn the TBP12 transmitter on.
  • Hold the SELECT button until the channel number flashes.
  • While holding down the SELECT button, press and release the VALUE button, then release the SELECT button.
  • The display will briefly show RF1 or RF2 to indicate what mode it’s set to. This setting is retained when powering off and is displayed each time power is turned on.