Ux1 Mic & Instrument Input Simultaneously Outside Of Daw?

[JN99]

When I run PodFarm standalone I only have the option on one input (A) in the mixer and the dropdown does not have a Mic + instrument option - it's either or.  If I run through my DAW (Reaper) I am able to enable the option in Asio settings and record/monitor both guitar an mic simultaneoulsy by selecting the asio input configuration of instrument + mic.

 

Is there a limitation on doing this directly in Pod Farm or some other way to enable this outside of the DAW?  Ultimately what I am trying to do is use the UX1 as the mic source for webcam recordings and to feed both guitar and mic signal in.  I can enable the UX1 as the "microphone" via my webcam software but there seems to be no way that I can find to enable the UX1 to use both mic and instrument inputs in this case.

[Triryche]

Have you tried to configure this in the Line6 Audio-MIDI devices control panel (no POD Farm)?

 

Also, if you are using POD Farm, make sure you are in a dual tone mode, you should then be able to select mic for Tone A and instrument for Tone B.

[JN99]

Thanks for the reply Guru but I'm a little lost as to where to check/do either of these things.  Where/how do I find the Line6 Audio-MIDI devices control panel and how do I enable dual tone mode in PodFarm?  I've seen presets come up in dual tone mode but not sure how to enable it as such without the preset.

 

OS is Win 8 if it matters.

 

Thanks!

[Triryche]

Not sure where thew short cut the Line6 Audio-MIDI devices is in Win8, maybe under apps? But there should be a Line6 folder.

 

In POD Farm there should be a Dual button towards the top.