JTV Workbench (v1.9) model positions inconsistent

[the29band]

I am currently on v 1.9 (I decided to rollback from 2.1 to 1.9). Anyways, I was looking at the models change in workbench as I change them on the guitar using the knob and pickup selector switch and I see that there are some inconsistencies between various positions within the same models. Don't know if this is by design or just incorrect.

 

e.g. Looking at the 'Special' bank I see that Position 1 has the body type of Special Junior with Junior 90 pickups but position 3 and 5 (which are supposed to be the N+B and N positions of the same guitar) have the Special Special body with Special 90 pickups.

 

I saw similar inconsistencies within the 'Tele' bank as well. And I am talking about switching positions 1,3 and 5. Not talking about 2 and 4 because I understand that they are models of a different guitar.

 

So does anyone know if this is by design or simply just incorrect and the only thing that should change when I move from 1 to 3 to 5 is the bridge and neck on/off on the pickups?

 

Thanks for your answers in advance!

[phil_m]

Those are actually correct. Positions 3 and 5 in the Special bank are a different guitar than Position 1 (actually a Les Paul Junior only has one pickup - the bridge, so there wouldn't be anything else to model for the other positions). It's the same thing with the Tele. There's three different guitars in that bank.

 

[the29band]

Oh, okay thanks! Didn't know that. From the manual, I assumed it's the same models. I still see that the Tele Thinline and the Tele Custom are switched on position 4 and 5. 4 should be Thinline and 5 should be custom as per the chart you posted but it's the other way round. I can change that in workbench.