Hi guys,

I tried to record a clean (unprocessed) guitar signal and re-amp it with my POD X3 PRO - but it sounds very noisy!!!

My recording SW ist Cubase SX and my sound card is a midimann ltd 1010.

My recordingsettings are:

--> guitar signal into the "guitar in 1" on my POD

--> the "unprocessed out 1" direct to an analouge input of the midimann

--> the "processed out 1 and 2" (amp: treadplate-high gain, no other effects) to another analouge inputs of the midiman

--> I recorded a riff (3 chanels: one unprocessed, two processed)

--> I playedback the rocorded riff and the unpocessed track sounds absolute clean and clear (without any noise) and the processed tracks sounds as I setted it up

--> then I routed the unprocessed track to an analouge output of the midimann and futher I linked that output to the "line input 1" on my POD

--> I took the same guitar sound as before, I only changed the input on my POD from "guitar 1" to "line input 1"

--> I playedback the recorded riff (only the unprocessed signal) and recorded the new (re-amped) processed out from the POD

--> When I compare the two recorded processed out signals I can hear a definite difference! The first recorded signal (as I mentioned before) sounds as I setted it up and the

re-amped signal is noisy!!!!

What am I doing wrong? Please help me!

Many thanks

Reinhard