Currently Being ModeratedAug 5, 2010 3:25 AM (in response to JayKoons)Re: My amp turns off after freezing and making a popping sound. Why does this happen?
Here is what you should do, and in this order;
1. Try a factory reset.
Turn off the amplifier, holding down the SETTINGS/TONE button and switch on again keeping the button held down for 5-8 seconds. Note that this will wipe any custom tones or settings you have made and you should also make sure that any songs or loops are backed up to SD card (or other recording device via the RCA outputs.)
If that doesn't fix it...
2. Reinstall the latest firmware
If that doesn't fix it, it is a hardware issue...
3. Return the amp to a service center for repair. You can find the address of your nearest in the :: Support menu above.