Aug 11, 2010 5:45 PM
Share your gear
-
Like (0)
Let's get this off to a great start by sharing our gear we use on a typical Sunday.... or maybe just a list of all your toys!
Guitars
PRS SE Custom Semi-Hollow
Ibanez AW100CE (Acoustic/Electric)
Amps/Effects
- POD X3 Live
- Fender Blues Junior NOS Tweed
Mini Buffer by This1smyne Custom Effects
Korg Pitchblack Tuner
Barber Tone Press
Xotic Effects BB Preamp
Fulltone Fulldrive II Mosfet
Analogman Boss TR2
Ernie Ball JR Volume Pedal
MXR Carbon Copy Analog Delay
Boss Delay DD5
Boss RV-5 Digital Reverb
Voodoo Lab Pedal Power 2+
Misc
Monster/George L's cables
Dunlop picks
D'Addario strings
M-Audio IE10's in ear monitors
I have bought and sold too much stuff over the years... I have much less now, but always looking....
Frank ![]()
Message was edited by: tonebuff
fender strat, eric johnson body, vintage 62 hot rod neck, callaham hardware and pickups (H/SRV)
fender supersonic head amp rocks!! to use it live
laney gs212 cab with vintage 30s
peavey valveking for small gigs
pod x3 live (in the fx loop of the fender or in the input of the VK)
thats it, i need nothing else, maybe a compressor, but not really
Acoustic
2006 Tacoma RM6C Roadking
Electric's
1999 Ernie Ball Axis
1996 Fender Strat Ultra
I also have a 2006 MIM Strat I rewired with SCN pickups and a LR Baggs bridge for any tunes when,
I need to switch from Acoustic to Electric tones mid song.
Pod X3 Live running direct to the house
When I am out of Church I run the X3 into a Crate powerblock through the effect return, bypassing the preamp.
Maximum power with ultra portability
Howzit dudes
Just bought the X3 Live... very cool!
Using a Fender Strat.
Roland Cube60
Cant wait to use the X3 in the Band!
American Standard Strat w/t Warmoth neck
Nashville Power Telecaster
Homemade Solid body guitar with Humbuckers- GR33 Synth Pickup and Warmoth neck. (attached a picture)
Takamine EAN40c (My Favorite Acoustic)
Takamine Santa Fe
Taylor 312
Fender 5 string Jazz Bass
Marshall MG50FX
Fender Acoustisonic Jr. (Best amp money that I ever spent)
Fender Bassman 100
Pod X3 Live
Pod XT Live
Boss ME50 (This sits on my desk at work w/t headphones for woodshedding at lunch)
I am using my Telecaster, X3 and Marshall as my mainstay rig.
I also have an MSA 10 string pedal steel guitar and a Michael Kelly square neck resophonic guitar (Dobro). I don't play these too much anymore.
Blessings
I'm so happy to see this group. Thanks for sharing your input.
On most Sunday's my set up is Variax 300 to Pod XTL to house. Depending on set list, I do sometimes play a Ibanez RG equipped with a Roland GK-3 into a Roland GR-20 synth. Also straight to the house.
We have no on stage amps. The band normally consist of piano, acoustic guitar, bass, electronic drums and electric guitar.
I do add mandolin on occassion.
God bless.
Martin HD28
LR Baggs Pickup
LR Baggs Paracoustic DI
Telecaster USA Custom Body & Neck
DiMarzio Virtual T Pickups
X3 Live
Roland KC-100 amp
Guitars:
Brian Moore C90P
1981 LP Custom
Fender Eric Clapton signature Strat
Variax 500
Steinberger GM7SA
Peavey Hydra doubleneck
Amps, etc:
Pod X3 Live / tiny Peavey kb amp for monitoring
Fender Cyber Twin SE for outdoor gigs - X3L sounds great through the power amp
Damage Control Womanizer
Fulltone OCD
Analog Man modified TS-9
Keeley modified Boss Blues Driver
HBE Germania44 treble booster
Dunlop Ultex 1.0mm picks
Planet Waves cables
My most common setup is the X3L, treble booster, and the Brian Moore or Vax 500.
Howzit, how acurate is the variax 500 guitar?
Pretty good. I use the Tele, acoustic, and Les Paul P90 models mostly, and it's pretty accurate.
ive always been around a variax 600, but for some reason i dont buy it, i have the money, but i dont know why.. haha
i know the acoustics will blow my mind off,
its good to know theyre good
I use an Epiphone Semi Hollow Les Paul style guitar running into a Boss Blues Driver (not a huge fan), into an MXR Distortion III, into a Crybaby (not always plugged in) into an M13 where I split the effects loop and have the mods and delay go into the amp's effects loop and the previously mentioned pedals go into the front of the amp.
I recently just upgraded my amp and use a Vox AC30 CC2, previous to this I was using a Peavey Classic 30 with a Celestion G12H speaker replacing the stock one.
Looking forward to the Vox this Sunday though. ![]()
Guitars:
1991 Fender Ultra Strat (USA)
1998 Taylor 710ce
Variax 300 Electric
Amp:
Roland JC120
I primarily use the Strat through my POD X3 Live, direct into the PA. The amp is only used for outdoor events.
Guitars
Warmoth hollow bodyTele with Fralin pickups
Santa Cruz VJ with Fishman Rare Earth blend pickup
Amps
Pod X3 Live
Yamaha mini-PA floor monitor
The X3 goes straight to house PA via XLR, the Yamaha monitor gives me some stage volume but our church PA has got good monitors anyway.
I have a Parker Fly Classic up for sale as I plan on getting a Variax 700 - I can then retire the Santa Cruz (or sell it as I have another Santa Cruz I use for home playing, this one's an OM). I hope the Variax/X3L will give me the ultimate church rig - anyone else use a Variax/X3L in a church setting? I'd love to hear your thoughts!
Blessings
Hi guys, first post on the forum, God bless you all!
For the most part, I use the Variax 600 you see in my picture, with an XT Live. It is the most versatile set-up for worship team playig I have ever found. The ability to go from snarling Les Paul to mellow acoustic twelve-string to spiky electric sitar to clean Strat with one push of a switch is really great for the needs of the various songs we play at church. The chcurch owns a Peavey Classic 50 4x10, and my set-up works quite nicely with it.
But, I also have a few other toys...
Guitars;
Gibson Faded Flying V(recently outfitted with Lace Alumitones)
Hamer Special FM(my favorite guitar, named Miss Kitty)
Johnson Delta Rose(retrofitted with GFS humbucker size P90s, gets that sweetly rude ES-330/Epi Casino bark. Total cost, $150, incl. new p/ups)
Guild D-25M(the first guitar the Lord put in my hands after I was saved in 1981, named Ol' Brown)
Johnson chrome plated resonator guitar, w/Elderly Instruments p/up.
Basses;
OLP Tony Levin Signature model 5 string
Squier Vintage Modified Fretless
Guild Ashbory bass
a couple of no-name P bass copies I'm working at making into fretless.
Amps
Mesa Boogie Mark III Simul Class
Roland Blues Cube 60 watt
tiny Crate practice amp
Crate Power Bloc
SWR Bass 350
Avatar 4x10 bass cab
Peavey 2x10 bass cab
2 custom 1x10 guitar cabs (use with the Power Bloc)
Man, I should have written this all down before. It reminds me to say "thanks God, you sure been good to me!"
My set up seems to pale in comparison to some of you guys.
Guitars:
Parker P10e
Gibson Chet Atkins 2001
Variax ACoustic 700
Variax 500
AMP:
None at the moment I just run right into the house. I if I want more sound I will grab the Churches Traynor or Marshall acoustic
Pedal:
Pod X3Live
I use the normal set up from the X3L xlr out into the PA. Our sound guy puts me in a monitor bubble if you will so I'm not stuck with anything right dead in front of me but allows me to hear everything some what clear. We just have more people that we do monitors.
I am happy to share/add that I now can throw a Parker Nitefly Mojo Flame into my collection.
I play mostly electric, my PRS CE24, Blue Matteo... I go through an XTL, into my Genz Benz Shennandoah amp, ch 1... If need be, I can set up channel 2 for my Martin DC Aura, and use the on-board Alesis effects for any chorus or reverb to add.
I used to have a Peavey Classic 30, but it argued too much with my XTL, and I preferred the versatility the mega-pedal gives. For home, I have a Centaur amp, which is really clean, and has some switches that let me cut out the tweeter for bass, and can also do keyboard (not that I play)...
Side note, has anyone had any luck setting up a UX2 into a Mac? I haven't gotten a stinking thing out of the UX2 yet, because I can't figure out how to make any sound come out of the speakers for the computer. Any help would be appreciated.
Really enjoying this board...
Keep on servin', equip the saints, and lift up the Name of Jesus
Guitars:
PRS Custom 22
Fender 08 American Standard (with DiMarzio Area 61 & 58)
Ibanez Axs32 (with Seymour-Duncan Phat Cat)
Cort Curbow
Godin Multiac Spectrum
MultiEffects:
Pod X3 Live
Pedalboard:
TC Nova Delay
TC Nova Modulator
Fulltone Clyde Deluxe Wah
Fulltone OCD v.3
Fulltone Fulldrive 2 Mosfet
Boss TU2
Boss OD3
PowerPad II
T-Rex Tonetrunk
Acoustic Rig:
Roland GR20
EHX Micro Pog
Boss CH1
BBE Sonic Stomp
LR Baggs Para DI
Amps:
Vox Ac15cc1x
Samick 100 2x12
Guitars=
------------
MIM Strat,modded(Vin Noiseless pu's,treble bleed,mid boost circuit,graph tech saddles,I can't leave things alone!)
Strat style Variax transplant with lace single coils and carvin hum in bridge
Ovation acoustic
Sigma Acoustic
Effects
-------------
Ts9 with mods
Crybaby q535
Danelectro Delay
Ernie Ball Volume
True Bypass Loop
Amp
----------------
Duoverb head strt to Mixer
Carvin In Ear
Next Purchase?====M13!!!
I love to tinker,build and mod almost as much as playing so most equipment I own or get usually gets upgraded or added to.I think I have some kind of disease that will not let me be satisfied with my setup,I think it is called being a guitarist but i'm not sure.Usually only use one of the two strats on any given worship setting with everything else listed.Rock on...........till he calls us home.
OK. I'll respond to this one.
I use one of two setups, depending on venue. Setup 1 is the analog rig and setup 2 is the X3 rig - which models setup 1 as closely as possible (pretty darn close to most listeners ears - kinda amazing really). The idea is that I can produce essentially the same tone whether via the X3 or the analog rig. I will still say that it doesn't play the same - picking dynamics are different for example (the X3 is less responsive), but it works and man... it is so easy to travel with the X3. I can load in and be ready to play at a pretty large venue in about 30 minutes (including uncasing and tuning guitars, etc.), as compare to an hour and a half.
From the very beginning of working with X3, our goal was to deliver the same sound product with the X3 as we do with the tube amps and analog pedals. We tweaked the X3 against the analog rig to do that and it took about 3 months of doinking with it is the studio to get the X3 close enough to play out. When we thought we had it pretty close, we recorded it both ways to see ie we A/B'd tracks with X3 and the analog gear. We waited a couple of days before going back to change anything on X3 to let our ears rest so we'd get a fresh listen.
FYI. I was totally NOT cool with the X3 at first until we completely blew off all the factory pre-sets and built everything "clean sheet." We returned one X3 and bailed out of the whole X3 idea until we connected with a very knowledgeable engineer who convinced us that the X3 had (pretty much) everything we were looking for in the tone department (and what it didn't have it would make up for via it's portability), but not to attempt to rush things - use patience for the best results. He put it this way "it took you years to build your analog rig just the way you want it to sound, so give the X3 system a bit of time too and you'll be happy with it." Turned out to be true. As said above, it was a process, but I do believe it has been worth it and I think we're happy.
This is the current gear I am using:
Main Gigging Guitars:
ELECTRICS:
Les Pauls:
1975 Goldtop Deluxe with Mini-Buckers (for a more single coil sound)
2008 Goldtop Standard
*1980 Cherry burst Standard re-worked with Torres Wiring Harness and Seth Lovers PAF P'ups.
*main axe
Rickenbacker 660-12
Gretsch 6122-1962 HT (Tennessean)
ACOUSTICS:
Martin 000-c16gte
Martin D16GTE
Ovation 1861 Balladeer (American) - used mainly for outdoor shows (super stable on tuning)
Ovation 1861-12 Balladeer (American)
Dunlop strap locks on everything.
AMPS
Primary Amps
Vox AC30CC2X and Fender Blues Deluxe USA 1986 (sometimes in stereo, sometimes one at a time, depending on set list)
Other (very) Occasional Amps
1968 Fender Vibrolux Reverb (sweetest amp I own and I protect it like it was gold)
Vox AD120-VTX (stereo Vox modelling with tube pre)
Vox AD60-VTX (mono Vox modelling with tube pre)
EFFECTS
1. X3 Live ~or~
2. Effects Board consisting of (main pedals):
Boss TU2 Tuner
Ernie Ball Volume Pedal
Fulltone Fulldrive 2
EH Big Muff Pi
Keeley 4 knob compressor
Rocktron Tsunami - Delay/Stereo Chorus
Line6 DL4 Delay
BBE Sonic Maximizer
Cusak Tap-a-Whirl Trem
Keeley Katana Clean Boost
Boss RC20XL Loop Station
Whirlwind A/B/Y
Voodoo 2 Power Sources
MXR Noise Gate
GeorgeL wiring
Pedal-Pad cases
Sennheiser Wireless for large stages
Ears M-Audio IE30's.
We run the X3's (for me and the rhythm guitarist) at probably 80% of our shows now and run direct to the house system. After a year of working with the X3 at some pretty major shows, we are getting comfortable with the results and our engineer loves it or course. On the X3, we use dual-tones on a whole bunch of stuff and send our fender gear down one channel and our Vox gear down the other and then pan about 80% L and R on each. We run both XLR direct out to the house and the 1/4" live outs (which we set "same as direct outs") to invidual wedges or the "me" side of our IEM's. For the 20% where still still use the analog gear, most of the time I run the compressor and the BBE Sonic Max with a slight touch of delay and verb from the amp basically the whole time, then just sprinkle in whatever other effects or loops I need depending on the material at that show.
I think that's it. Wow, this was a bigger writing commitment that I thought it would be. Not sure that good it'll do anyone but oh well!
Peace.
GeeTah (Brad)
Eph. 5:19!
Wow,a lot of stuff here! I try to keep it simple, everything works with everything on my board!
Guitar: '05 Fender American Telecaster (pickup heights changed)
Amp: '08 Fender Hot-Rod Deluxe (re-valved with HARMA valves)
Pedals: (in order):
-> Zvex Fuzz Factory
-> Behringer Tuner
-> Carl Martin Opto-comp (compressor, always on)
-> MXR GT-OD (overdrive)
-> Boss OS/2 (distortion)
-> MXR Carbon Copy (delay)
More and more often these days, I don't use anything but the compressor! The drive channel set to somewhere around 2 combined with the versatility of the telecaster gives me everything I need! Although I do play in a huge hall, so everything I play has loads of reverb on it, kinda limits tone selection!
David
'08 Stock AmStd Strat
'04 Gibson ES-137
1976 Martin D-35
X3L
Bad Monkey (haven't tried w/the X3L yet)
Peterson Strobo stomp, however for live use the X3L tuner works just fine
Blues Jr.
The X3L learning curve is straight up for me, haven't run direct into the board (sound guy can't meet me to preset yet), so I'm not really happy with my church tone yet. I understand the Fletcher-Munson curve, & realize that no matter what it sounds like at home church will be different.
The best thing I've found so far is Lincoln Brewster's 18D patch, but it sounds kinda mushy. When I can go into the board I think things will improve dramatically. Take care, Pat
I love the variety of setups. Seems like there are more than a few ways to do the same thing.
Guitar(s)
Assortment of '57 strats with various pickup combinations.
Just picked up a '60s Road Worn that sounds pretty good.
Les Paul Studio, mainly for slide work.
Martin 000-15 for acoustic sets (no onboard pickup, mic placement slightly behind the bridge pointed towards the soundhole).
Fender FR-50 and Regal RC-1 for a different acoustic sound and acoustic slide (same setup as the Martin for mic placement).
1971 Fender Telecaster that my dad got when he was in the Marine Corps.
Amp
Floor POD Plus direct into the board. I split the left channel out to a Squire bass practice amp for stage volume. I had to do this on my previous POD 2.0, so I'm not sure if there is an AUX output that I can use without splitting the left output. It is working fine and still allows all chorus and rotary effects to be fully simulated in the one channel instead of being cut in half.
Strings
.011s on all guitars.
I have wanted to put a live amp on stage, but at the volume we play it would be impossible to saturate the tubes. The POD seems to be working just fine. As far as the guitars, it depends on what our set list is. I have found that if I plan on playing clean, I'll go with either Vintage Noiseless pickups or Lace Sensors. If I plan on putting any fuzz or saturated tone, I'll use the '69 Custom pickups or Texas Specials. If I'm going to add any compression to try and milk sustain for slide, I'll just use the Les Paul or use the Fat 50s and rock the wah pedal back about halfway.
Scott
Hello All,
I currently play:
'88 ESP Mirage Custom.
'04 Ibanez Prestige 2570 VSL - Vital Silver
'05 Ibanez Prestige 2550 GK - Galaxy Black
Jackson Performer (not sure of the year) that I've tricked out. - Black
Line 6
HD100W Spider Valve/Bogner Head
4x12 Slant front cabinet w Vintage Celestion 30's
FBV Shortboard MKII
M9
Guitar Port with Riff Tracker and Gearbox
and last but not least....Morley Wah
![]()
Nice selection of guitars, amps and gear here:
Here's what I use in worship settings:
Electrics:
Gretsch Black Falcon w/ bigsby
Taylor T5 Koa
Gibson ES 335 dot
Fender Telecaster w b-bender
Rittenberry SD - 10 pedal steel guitar
Acoustics:
1974 BC Rich B 28 dreadnought
1975 Gibson J45 deluxe
Effects:
X3L
Pedals:
Fulltone Fulldrive 2 Mosfet
MXR Carbon Copy Delay
Goodrich Volume pedal
Boss TU-3 tuner
BBE Acousticmax
Amps:
Jazzkat Tomkat
Atomic Reactor 112-50
For services i use a variax with the variax digital cable going to a pod x3 live going direct to the system. i have my x3l also feeding a marshal mg 100 hdfx half-stack for stage volume although i would love to switch to a silent stage instead. this setup is simple but great for me because i'm usually leading the singing as well and not having to switch guitars between electric and acoustic songs really helps the flow of the service. somebody had me in mind when they created the variax x3l combo.
Guitars:
2008 MIM Fender Strat
2006 MIM 60th Ann Fender Strat
2005 Japanese Fender Aerodyne
1996 MIM Fender Strat
1981Peavey Preditor (USA)
1980 Skylark SG style 5 piece neck thru
2007 Squire Tele
2003 Epi Les Paul plus top
2007 Line 6 Variax 300
Other assorted guitars and basses.
Amp:
Line 6 XT Live with all packs
Marshall Solid State MG series 1/2 stack
Fender Acoustronics amp
~Howie / Consider This
I play for between 4 and 6 hours every weekend for a worship team. It took me nearly 15 years to get to this point with my equipment, and I get the most compliments about my tone, my overall sound and the fullness of the band with this configuration.
Primary guitar:
PRS Paul Allender SE (green) with Tremol-No installed to lock the bridge (I play a lot of 2-string bends)
Backup guitars:
Epiphone Prophecy EX w/ EMG 81/85's and 18v mod
Epiphone Les Paul Standard
Schecter C-1 Classic
Wireless unit (I do not like a leash, so I can actually walk around and interact with people as I play)
Digital Reference DR-3500 system
Amp:
Fender Hot Rod Deluxe (1x12 all-tube amp) - great for low stage volume but sounds great mic'd
Mic used to capture amp sound:
Sennheiser e609
Effects:
Line 6 M13 (using 4-cable method)
Two BOSS FV500H pedals (one as expression pedal and one as volume pedal just after wireless receiver)
DigiTech X-series tuner
Studio gear/Backup live system:
POD X3 Pro w/ FBV Longboard (in its own portable rack case)
---
M13 setup:
I use all 12 scenes with various default stomp boxes enabled so that I can perform some quicker jumps than having to rapidly make between 2 and 4 stompbox changes in and out of a solo.
FX1-A: Vetta Wah
FX1-B: Octave (1 octave down to simulate/demo bass parts)
FX1-C: Compressor (almost never used)
FX2-A: Tube overdrive, very minimal levels (match clean output level)
FX2-B: Tube overdrive, 50% drive (match clean output level)
FX3-C: Tube overdrive, 100% drive, slight output boost for solos
FX3-A: Analog Chorus (set up to almost sound like a flanger)
FX3-B: Uni-vibe (dotted 1/8 note)
FX3-C: Tremolo (1/8 note)
<External effects loop between FX3 and FX4>
FX4-A: Digital Delay (1/8 note)
FX4-B: Digital Delay (dotted 1/8 note)
FX4-C: Digital Delay (1/2 note)
---
Scene setup:
Scene 1 (Fx1-A): Chorus only
Scene 2 (FX2-A): Slight overdrive
Scene 3 (FX3-A): Moderate overdrive
Scene 4 (FX4-A): Heavy overdrive
Scene 5 (FX1-B): Chorus + dotted 1/8th note delay
Scene 6 (FX2-B): Slight overdrive + dotted 1/8th note delay
Scene 7 (FX3-B): Moderate overdrive + dotted 1/8th note delay
Scene 8 (FX4-B): Heavy overdrive + dotted 1/8th note delay
Scene 9 (FX1-C): Uni-vibe only
Scene 10 (FX2-C): Slight overdrive + 1/2 note delay
Scene 11 (FX3-C): Moderate overdrive + 1/2 note delay
Scene 12 (FX4-C): Heavy overdrive + 1/2 note delay
In all cases, besides scenes 1 and 9, the chorus effect adds level and depth to the tone so I use that to punch my solos through the mix if needed rather than wasting an FX spot on a boost, though I could easily do that with FX1-C).
I find this setup covers about 95% of what I would use during a service, and if I need to deviate, I use scene #9 (FX1-C) as my deviation setup for something more unique for that week.
Feel free to ask questions, it's taken me a VERY long time to get this gear set up (by what I've been told by the sound tech as well as listeners) very successfully.
Winzlo...Nice.
Could you by chance do a contrast and compare of the M13 vs X3?
I think my fundamental question is balancing "patches" or "scenes". Maybe the only beef I have with the X3 is that I have to balance levels on the fly. In other words, I will write, or organize patches at home depending on the set that week and once I get to rehearsal, I spend the first run through bent over adjusting the output from patch to patch, then from song to song.
After reading your M13 setup, it made me wonder if it generally allows for a more consistant level from grouping to grouping, sort of like my old stomp box setup.
I am considereding the X3 Pro so as to have the control panel at eye level, I like that.
I also am attracted to the looper function on the M13, it would have been useful fro one song in particular during the Easter Services.
Thank you for your time,
Blessings, Strato
Could you by chance do a contrast and compare of the M13 vs X3?
Having had the POD X3 Live and now the POD X3 Pro at home, I can tell you what made me want "more" and to seek out the M13. With "traditional" effects processors, you are limited to 1 effect chain per "patch". With the X3 series, you effectively get 2 chains. In my case, I felt that even 2 chains wasn't enough because of my needs for quick switching between a song's intro, verse, chorus and solo parts. The M13 having so much more available in terms of scene switching as well as individual stompbox switching (I could literally have 12 different distortions in a single scene!) made the practicality of this shine far beyond the X3 series, which I would be much more apt to use in the studio than in a live situation where speed is the difference between a successful performance and awkward pauses right in the middle of a song!
I think my fundamental question is balancing "patches" or "scenes". Maybe the only beef I have with the X3 is that I have to balance levels on the fly. In other words, I will write, or organize patches at home depending on the set that week and once I get to rehearsal, I spend the first run through bent over adjusting the output from patch to patch, then from song to song.
As stated above, I find scenes much less restrictive. The trade-off is that you MUST use your amp's preamp section to get your tone, where as with the X3 series, it can be its own preamp and you don't need any additional gear. As part of my usual setup during practice, I do the same thing you do. However, when I get the levels right, I save the scene and then copy it off to either folder 2 or folder 3 depending on my needs. I leave folder 1 as my "Church" presets so levels are consistant. I leave my amp at volume 2, and match my levels against that level, working with who's at the board to get a dB comparison as well as a perceived comparison. This does take about 30 minutes, but if your sound tech is familiar with working with effects processors, he'll expect this every week. I make it a habit to just go to practice 30 minutes early and do this before the band gets there. From there, if I need more, I can just boost my own amp level and don't have to touch any of my presets (but don't forget to tell the sound guy so he can back the mic gain down!) ![]()
I am considereding the X3 Pro so as to have the control panel at eye level, I like that.
I also am attracted to the looper function on the M13, it would have been useful fro one song in particular during the Easter Services.
Before I went "tube happy", I gigged with the X3 Pro and the FBV longboard. The shortboard is just as useful, I just liked having more space between my settings so I could stomp with a little more room for error. <Grin> I use the looper on the M13 to loop through a chorus part so the rest of the team can practice vocal parts. This is VERY helpful to the worship team leader.
Before you make a decision between the X3 and M13, I highly recommend investing in the Paul Baloche Modern Worship - Electric Guitar DVD. This has 2 DVD's in 1 - the first version of this is an "extra" (with Glenn Pearce). The main feature is the latest version with Ben Gowell (fellow Minnesotan). The equipment chapter was what I used to determine what sounds I really felt I wanted on my "palatte" and where the idea of the M13 first came from for me. It's a superb DVD and I highly recommend it to any electric guitarist in a worship setting. It's not as relevant if you are also the worship leader, but if you are a supporting guitarist for the band, this DVD really speaks to you.
I guess I should have stated that I use an X3L ( a little over a year) now after graduating from the XTL. Could not imagine playing without it. If it were to fold up on me tonight, I would be at GC in the morning waitng for the doors to open!
After my first posted question, I took a look again at the M13, and a couple of things might sway my decision. First would be the volume pedal, and I have re-discovered the Wah pedal. I like them being attached/connected such as the X3L.
The other big-deal would be the XLR direct outs. I send my 1/4" outs to a little Marshall 50 watt solid state for my stage monitor.
I too went through a tube phase that ended about a year ago. Had a Hot Rod Deluxe, loved the tone, hated the location of the controls. Proved to be too much amp for Church. Traded it over for a Peavey 20 watt Windsor with a power soak, wound up giving it to my son. It all changed for me when I gave in to the idea that everything I play is processed to the point that I am over-riding anything that the amp is doing. ( I am drawn to big 80s power pop guitar tones, not loud, but large) So I have opted for a clean reproduction of what the X3 gives me, and have been extremely happy with the results!
Between services on Easter, a visiting musician asked if my amp was a tube amp because of the warm smooth tone. I thanked him sincerly and told him that what he was hearing was a direct feed to the board, and thanked him again on behalf of our sound tech!
I am probably looking at the X3 Pro and FBV board.
I will check out the DVD, always good to seek counsel!
Thank you again for your time.
Strato
I purchased an X3Live in May of last year. I actually went to Sweetwater Music's store in Indiana while on a business trip with the purpose of buying the X3. However, they brought 2 units which were out of box failures. By the time the third one came out (and worked properly), I was already playing through a Digitech RP1000 that was on display, and fell in love with it. I purchased the RP. I used that first one for about 2-3 months and it died when we used the XLR outputs. Sweetwater next day aired a replacement to me, and I used that one to play through the first service on Sunday. Once again, it died, when, in between services, I stupidly plugged in the XLR outputs. I made it through the second service with my Marshall amp and an old Korg A-1 processor that was in my rack.
Now my confidence was also shaken in the RP1000. So, I ordered a TC Electronic Nova System. I played through it for about an hour at home, and decided very quickly it wasn't for me. I returned it and bought the X3Live. I have never looked back.
Remember my old Korg A-1? I used to send my X3Live through it, then into my amp's FX return, then I miked the cabinet. Well, my Korg A-1 is about 19 years old. It still sounds great, but I could hear the digital noise in our in-ear monitor system, so I feared it was going to die soon. It served the purpose of giving me 4 extra effects in stomp box mode, to embellish anything I needed to add to the X3Live. Basically, it made it easier for me to come up with any sound that we were trying to cover, without actually having to create a patch in the X3. For instance, if a new song that week, called for a vibrato, I would just dial it in with the Korg, and not tamper with the X3, or have to bank up/down during a set, just for that special sound, that I might never use again.
So, before we had an embarrasing on-stage moment when the old A-1 failed, I purchased an M13. I picked it up a couple of days before Good Friday. It gives me the same mojo as the old Korg A-1 Rack unit -- 4 simultaneous effects added to the back end of my X3Live, but with new technology, cleanness, and great new effects that did not exist 20 years ago - the octoverb and particle verb alone justify the $500 pricetag. For good measure, I also bought a new Digitech Timebender, and new expression pedals - one to control the Timebender, and 2 to control the M13's features.
Oh yeah, I almost forgot, I bought a boutique overdrive/distortion pedal about a year ago - a BB Plus by Xotic, that is the bomb. I run that before anything.
So my signal goes: Guitar - BB Plus - X3Live - M13 - Timebender - Stereo FX Returns to a Marshall AVT275 sealed back 2x12 combo amp with 75 watts per side power amp. I do not use the tube preamp to the Marshall. It is just a poweramp and speaker cabinet in my signal chain. We mic the Marshall amp with various mic's depending on which location I am playing at.
Here is the pedal board I made this week to haul this mess around. I haven't painted it yet.
Since you already own an X3Live, I highly recommend you get the M13 too and run them together.
PS - I did try to run the 4 cable method where I actually plugged my guitar into the M13, and ran looper cables to the X3 and back again, so that I could put some or all of the M13 effects before or after the X3, and the outputs of the M13 returned into the FX return of the X3, so that I could conceiveably run my amp live on stage, AND also send speaker emulated outs from the XLR's of the X3, but the noise and hiss was too much for me. It is cleaner and less brittle to run it all in series.
If I wanted/needed to run direct I could just change my 1/4" outputs to "match studio" and then use direct boxes out of my M13 or Timebender to go to the system, but then I would not have non-frequency compensated signal to feed my amp on stage....but it could be done in a pinch.
Again, the effects loop in the X3 just wasn't clean enough, and took too much low end meat out of the tone when using the 4 cable method - IMHO!
Good luck and God Bless.
that sound great...since my last post i made changes to my rig...guitar(godin xtsa) electric side to lahe splitter..side one to mxr 10band eq, to X3Live and then back to my own mixer..side two goes from splitter to another mxr eq to a tech 21 liverpool, to sansamp, to voodoo lab sparkle drive, to volume pedal to m13 and then back to my mixer in stereo......i use to x3live mainly for 8 great distortion patches... and the m13 for my overlapping delays and mods....also, coming from the guitar i have a piezo side and it goes to a boss ad8 and thne back to my mixer....and also have a 13pin cable coming out of guitar and going to roland gr-20 and then back to my mixer...i then send 2 xlrs to the pa system......i do not use the synth much unless our keyboard guy dos not show.....i love the set up...it does cover a lot of real estate though. so if we go play in another church, i pack the x3 and m13 in their own bags, and have 2 medium size pedal boards for the rest....i would one day like to a rack with a nice midi controller...but that is too much dough at this time.......i would have to post a picture next time.....God bless
Well I guess it depends on what amp you hook the X3 live up to and how you have it hooked up, but I use the 4 cable method with my Mesa Boogie lonestar 2x12 hooked up to an X3 live and in yesterdays service the pastor comes up to me and tells me what a great sound I had!
I also was using my private stock PRS Modern Eagle 1 guitar, but he was talking about the overall sound of the amp and effects through the PA, which I used the 4 cable method to go from the X3 live to the amp and simply miced the amp with a shure SM 57.
So I guess it may vary for some people, but mine sounds fantastic through my mesa boogie lonestar 2x12 miced!
I don't have the hiss and noise because I only use it with the X3 Live to the amp via the 4 cable method. I do not have a m13 and could not see the need for it in my situation...it would just be TOO MUCH for me to try to fool with two different guitar effects processors at the same time.
But I CAN say that I notice NO drop out of "lows" when I use my X3 live and go directly to my mesa amp via the 4 cable method. Matter of fact it sounds way better than XLR out to the board on the X3 live because it does not have any modeling and I am getting the true sound of my amp along with great digital effects.
Not long after my post, I delved into this issue I was having with using the 4 cable method between my X3 and M13. I truly wanted to have the ability to position M13 effects in front of or behind the X3, and I wanted the M13's output to return to the X3, so I could use the 1/4" outs for my amp AND use the XLR's to send a direct feed with cabinet emulation if I needed to.
I reported it sounding noisy and thin. The reason is, that I run dual tone mode for all of my main sounds. And in dual tone mode, the effects send will only function for one or the other tones, but not both. That means the M13's effects are only effecting one of the amp simulations in my dual tone setup, but not the other.
@rodzimguitar68........You are apparently wanting to run the X3 live in a way it was never designed to work!
So OF COURSE it is not going to work. That is not part of the X3 Live's function.
It was made to hook up to ONE guitar amp with itself not with an M13 in a chain.
Frankly, I don't know what you would need TWO modelers for anyway.
I don't know alot about the four cable method, however your conclusion sounds right. To get your M13 to affect both models, it'll have to be run before or after your signal chain, not the PODs.
and, since the X3 Live is made to be able to be used as an/in the place of an amp, the four cable method is completely logical. your tonal downfall lies in the previous, not in your idea or setup
In November 2010 I sold my X3Live and purchased an HD500. I no longer use dual tone amp simulations because one amp is all I need to get the sound I want. I usually stacked 2 amps on the X3Live so I could get the wider sound I wanted. At any rate, I no longer use an on-stage amp. We went to in-ear monitors and the direct feed from the HD500 is all I need. I purchased a MAC computer and LOGIC in Dec 2011 and having the opportunity to record with the HD500 via USB, and then listening to the patches in a full recording mix, has really helped me escape the "bedroom tone" trap. You know, that guitar tone that sounds amazing when you are just playing alone, but then gets lost in a live mix? Anyways, I still run a BB Plus Overdrive/Dist pedal before the HD500. Then I have an M13 and a digitech timebender in the effects loop of the HD. I could probably spend time making custom patches within the HD every week (because we play a different set list and some special songs that we play only one time and then never again), but I prefer to leave the HD alone, and use the M13 to bring in different, or song specific effects that week. I do take the time to set up my tempos for the songs we are playing to a click, and use the TAP button to synch to the live songs. I have my HD500 and M13 connected via MIDI so the tap command on the HD synchs both units.
I am playing the intro and the lead stuff
I am playing the high chimey U2-ish part
can you be more specific on how to contol the tempo from the hd 500 and the m13 at the same time....since my last post..i have updated my rig too...still have my godin xtsa...electric to lahesplitter one side to hd 500 and then to personal mixer...other side of spilter hits pigtronic philosophers tone, to fulltone gt500, to a tech21 liverpool, to a volume pedal, to m13...from m13 in stereo to tc electronics nova delay and then to mixer...piezo side of guitar goes to a boss ad8 and then to mixer...and finally my syntch cable goes to roland GR55 then back to mixer....from mixer i use 2 channels to go to pa system...we have avioms as monitors...in the future i want to get rid of the tech 21 liverpool and then come in on hd 500 as a second guitar from the my splitter....use the other channel on the hd and get the m 13, nova delay, fulltone, and a volume pedal in the loop in and out...but need to be able to synch the tempos....it would be cool to sync the tempo to my gr55 too.....and i don't think i can sync the nova delay....thanks..God bless
You just have to connect a midi cable from the output of the first unit into the input of the next, and so on....daisy chaining each one to the next. If you are using the HD500 as the main controller, when you tap the tempo switch, it will synchronize the M13 to that same tap tempo. If the Nova Delay has a midi in jack, you can connect the midi out from the M13, to the midi in of the Nova.
You can use any one of your MIDI devices as the tapper, and everything downline from that one will conform.
However, the patch change info will also be sent downline. So consider the impact of that decision to MIDI link all your devices.
I created about 8 tones on my HD500 and import them into a setlist saved for that weekend's songs. I created my ideal M13 footprint and then duplicated it about 30 times, so when I change patches on my HD500, the M13 effects footprint looks the same (sometimes we'll do a song that has a crazy effect, and I'll use the M13 to perform that task rather than mess with the HD500). BUT, by running my gear this way, each patch can be tempo specific and also any patch change recalls the same M13 patch, which again, can be tempo specific. Quite a bit of our songs are performed to a click track on ProTools w/ Reason performances, so I can arrange my gear to get me through a set and have my tempos saved, so I never have to use my tap tempo anyways.
However, if we play something "live" I can tap my HD and the M13 will also fall in line.
Hope this helps you on your qwest.
Thanks,
Rodney
i did that and put the mid cable like you said...and when i press the patches on the 500...the patches change on the m13...however...i can't get the tap tempo to sync....is there something else i have to do to either device?
The tap tempo does not send MIDI by default. I can't really remember the procedure to explain how to tell you to do it, but it is in the manual. If your M13 is patch changing with the HD, then they are already talking on the same MIDI channels, or OMNI. You have to program the TAP button to send the tempo pulses out the MIDI port and to the M13 or other devices.
If you use the HD in a logical, systematic way, you are probably going to reuse the same template over and over again. I suggest you map the tempo button and then save that preset as your template, and then everytime you start to create a new patch, start with your blank template, that has the TAP button output mapped.
I take mine a step futher - I always run my M13 in the effects loop, and I usually run the same types of effects, mapped to the same stomp switches. So basically the only thing I alter is the amp sim model and cabinet/mic. I have two of these templates - one for heavier sounds, and the other for cleaner or slightly overdriven sounds. I start out with the appropriate one, and build it from there. So my stomp switches and TAP tempo, volume and wah, are always ready to go. If I substitue a different overdrive, or different wah, then I just have reassign that new effect to a stomp switch or to the volume 2 for the wah.
That way all my mapping is consistent and the FX loop feed to and from my M13 will work the same everytime I build a new patch.
Hope this helps.
Variax 300 through XTL. Plugged straight into the house.
Axiom personal monitors using earbuds.
I wish I could play well enough to do all the sounds justice ![]()
I just play for the Lord and hope the sound guy does too...
Main guitar on Sunday - 70's Reissue Fender Highway One Stratocaster - I actually just got this last week.. traded my telecaster for it.. best move EVER
Back up guitar - Takimine Acoustic/Electric.. nothing fancy.. a $1500 guitar..
Line 6 Pod X3 Live
Boss Blues Driver
Sennheiser FreePort (wireless guitar system.. don't leave home without it... I hate wires)
For IEM I use a Behringer HA4700 Headphone Amplifier (plugged into the Monitor out) and I use Shure SE115 earbuds
ibanez sz700fm, which is now discontinued, into a pod xtl. then into the house and recording boards. the Lord has anointed it; i've gotten it to sound like (or better than) some professional musicians i've seen/heard with whoknows howmuch money invested in their gear. in my opinion, pod is a COMPLETE amp solution for both live and studio. the only thing, i wish it had a few more distortion and overdrive pedals instead of all the crazy fx-crazy unusable. but it saved me a few dozen grand an amps, so...
1985 schecter strat hss 1986 fender '57 reissue strat 1987 hamer chapparel custom 2007gibson custom shop1960 reissue les paul (traded a 50 watt marshall jubilee for)
pod x3 live with boss ac-3 in effects loop
Glad to find this group. Currently I am running a Ernie Ball Volume Pedal into a POD XT LIVE in an Ampeg V4 VT-22 Head into two Ampeg 4x12 Cabs miked by a Shure SM57. Guitar-wise, I am playing either a green Ibanez Universe 7 String or one of two Les Pauls (a 40th anniversary with P100's or a pawnshop prize Les Paul Studio with Tone-Pro hardware). Acoustic I run an Ibanez (Zebrawood) or old Epiphone EJ200 either straight into the board or thru the XT live. I also have a Boss Loop Station. I recently acquired a Digitech DHP-55 ( a poor man's Eventide Harmonizer) and hopefully I will pick up a Digitech Whammy, both from eBay. I hope to find a way to control both the DHP and the Whammy by way of the XT Live's midi functions. Hope to find someone on one of these forums who is midi savvy. I also have some assorted Boss, Ibanez, and DOD pedals. I want to create a versatile live sound where I can use the Loop Station to lay down rhythm tracks or assorted layers of background and use the DHP to lay down harmonies that I recorded on our only cd, which I hope to re-record. If someone knows a midi-savvy person on this site, please let me know.
Thanks
M.
I have shared once already but since have changed my setup."93 Mexi strat with GFS pu's,Variax strat conversion,Ernie Ball volume>TS9 modded>Blues Driver modded>Pod HD400>xlr to mixer(left output),right output to small 2 channel Behringer monitor box(Pod output and main monitor mix into this for my mix)>Carvin inear.
This setup works very well for me since I play with different song leaders all the time with all very different styles(folk to metal and everything in between).Blues driver is on almost all the time(drive"0",gain"from 75% to 100%,tone"75% to 100%),ts9 only when I need a little xtra oomph.
I pretty much only use a few patches.Dr.Z clean,Hiwatt clean,Fenderish clean,all with tube drive for thick OD and I found the colorsound OD is very transparent(liking it more and more).Particle and octo verb patches for pad and volume swells when needed also.I find most of the models I don't use.I tried to find the few that are really full sounding when clean and stick to those,seems to make it easier to tweak when needed.The HD is awesome and sounds great.I have owned the Pod 2.0,xtlive and back to the 2.0 then the HD.Been a Line6 fan awhile.Peace!!
Current rig and gear is a follows:
Guitars:
2006 Fender John Mayer Stratocaster
1978 Fender Telecaster Thinline
2001 Gibson ES-335 ESDT
2004 Taylor 414ce-L7
2006 Taylor 410-E-LTD
Mandolin:
2009 'The Loar' LM-600VS
Effects/Modelers:
Line6 POD X3L
Line6 POD HD500
LR Baggs Para Acoustic DI
Boss TU-2
Ernie Ball 6166 Volume Pedal
Other stuff:
Planet Waves NS Trigger Capo
G7th Guitar Capos
Kyser Capos
Mogami Cables
Shure PSM-200 Personal Monitor System
XDR95 Guitar Wireless
'STAR PICKS' picks
Wegen Picks
Snark All Instrument Tuner
Intellitouch PT10 Tuner
Hey @talbotpat,
I'm thinking that you should take the subject line literally and "share your gear!" I'm sure you'd get plenty of takers on this board. Wow what nice bunch of guitars!
![]()
Hello to all,
New to this post and have some questions for gear I'd like to get. I play P&W on Sundays and in a Christian band playing covers and originals. I'm planning on getting a Taylor T5. Currently playing through a Line 6 Bogner amp. With all the pre-sets in the amp, is the best approach to get a rig that is simply more about effects; maybe with an expression pedal ? I'm shopping e-bay and with all the multi-effects boards etc. it's a steep learning curve. I'd appreciate hearing some feedback about how to "best" match the amp with a variety (and affordable) of tones and creative expression possibilities.
God is good--all the time
Thanks,
Timark
@Timark, if you are still looking for a T5, I know someone who is selling one. It's a tobacco burst custom and in near new condition. Shoot me an email for more info. j.k.arise@gmail.com
Jealous!I love the Mayer strat.Nice setup.How "bout that "sharing gear" concept?JK.Peace and blessings.
Simple.
Variax 300
Baby Taylor with undersaddle pickup
POD X3Live
Rogue 4 chan 50 w roller PA
Vox VT15
Dell Latitude E4300 Win7 with all software
I am a Line6 guy since day one. Great stuff
PRS Swamp Ash Special Narrowfields
PRS McCarty 25th w/ Narrowfields
PRS CE24 w/ 57/08's
PRS SC Hollowbody with Piezo
PodHD 500 mounted on a PedalTrain with some switchers for quick guitar changes and room to swap in a spare pedal or two. Playing with an EHX POG in the slot right now.
I like PRS, if it's not obvious.
Complex, FX but no mulitple guitars for me ![]()
ESP EC-401VF with a GK3 pickup as well
VG-99 for modeled sounds
X3Live for the real pickups
Also I use a Voice Correct from TC Helcion, and use everything but the actual pitch correcting part ![]()
X3 Live and one of the following guitars:
* Les Paul
* Stratocaster (Tex-Mex Pickups)
* Stratocaster (EMG David Gilmour pickup set)
* American Deluxe Telecaster
Wow, I am envious of the cool gear you all use. Here's my gear list
Guitars-
Variax 500 Red
'76 Gibson Les Paul Black Beauty
'80 Ibenez ProLine Strat SSH w/floyd
'92 Alvarez-Yari Acoustic 6 String
Yamaha Classical
Yamaha Bass 4 String
Modeler-
POD XT wFVB
POD X3Live (bread and butter)
Old School Stomp-
ProCo DI
TU-12H tuner
Morley Volume Pedal
Visual Sound Jeckel & Hyde
Visual Sound H2O
Visual Sound Route 66
MXR Phase 100
Boss Compressor/Sus
Morley Crystal Blue Flange
Pedal Train Floor Board
Amp
Tech21 Trademark 60 combo amp ( used for monitor when no in ears are available)
X3 Live
1974 Strat with Seymour Duncans pickups, candy apple red
Fender Acoustic with a Fishman EQ/pickup
2006 Epi Les Paul with transparent amber quilt top
1984 Fender Precision bass (hand made in Japan)
Korg X5
Fender Acoustasonic Jr. amp
I've got 8 Boss analog stomp boxes (distortion, chorus, digital delay and some others - I'm at work and haven't used them since I bought my X3 Live so I forget what they all are now), an original Cry Baby rebuilt with original manufacturer parts
I'm using Cakewalk Sonar Producer 8.5 now and despite the learning curve (used Sound Forge/Sony Vegas for years) I'm loving this program for recording my new CD. I've got 18 original songs in the works and I'm all jacked up. The songs a're coming out better than I expected. :-)
Don
Hey guys / gals. Just in case anyone is interested, there is now a POD HD500 on a Pedaltrain PT-1 Pedalboard in a hardshell case that comes with the EX-1 expression pedal - all brand spankin' new in mint condition at a starting bid that is lower than if you bought the HD500 by itself. Check it out or spead the word.
Awesome stuff guys! I'm glad this forum is on here! I play for San Joachim church in Miami, Fl. My style ranges from Flamenco to Santana. I would love to put a Latin Rock worship group together, but only time will tell ![]()
I use:
-97 Fender American Strat ( thinking about buying a Duncan lil 59'er and putting it in the bridge. We'll see. )
-Ibanez G200ECent Electric-Acoustic Classical guitar
-Bugera V5 5 watt tube amp ( replaced stock tubes with JJ's, and replaced stock speaker with Jensen C8R )
-Marshall VS65 amp ( now mainly used at home, it's too much of a pain lugging it around. )
-Pocket Pod with various presets for our music. It can be a pain having to switch mid-song, but I get by. This solution will have to do until the Lord blesses me with a HD300! lol
-MXR Carbon Copy Delay
-Boss Super Overdrive ( saving up to have it modded by Analogman. It sounds good, but just not there yet. )
-Morley Bad Horsie Wah
and arriving in the mail....Line 6 XDS95!! Woohoo, I'm going wireless, baby!! lol
I play straight to my amp, no PA. I like having my amp as my sound source and monitor. But I'm thinking of getting an A/B switch and routing to both amp and PA. Now that I'm getting the wireless, I'll be able to judge music better by walking out and hearing how things sound from a distance. Decisions, Decisions! ![]()
I'm still trying to figure out the "proper" setup. Any help is always appreciated! ![]()
David
Update:
Got my XDS95 yesterday, and it...is...AWESOME!! It feels so nice to have freedom to move about and not worry about tripping over your own cable, or crossing into someone else's cable line. ![]()
POD HD500
POD X3 Live
POD XT
Flextone
Axsys 212
Rivera Fandango
Crate Vintage Club
Fender Bassman (15" speaker, not the sought after version)
Heritage CM150
LTD EC-256
Ibanez S-540
Ibanez S-540FM
Ibanez Talman TC 620
Ibanez Talman TC 420
Fender California Strat
Fender Tex Mex Strat
Fender Buddy Guy Strat
Fender Deluxe Player Strat
Fender Big Apple Modified Fralins and a USACG Neck
Fender Nashville Tele
Fender Tele Std MIM
2 Electra LP Copies
USACG Parts Strat
Stewmac Parts Strat
Stewmac Parts Soloist
Agile HARM
Agile Goldtop LP with P-90s
Taylor 414MACE
Blueridge BR343
Sigma Dread
Ibanez Exoctic Wood Acoustic
Various pedals
this list of pics is not updated.
haha^^
I only have this
st blues guitar and a line 6 pod hd 500^^
Guitars:
PRS SE EG with Starla pickups
PRS SE Bernie Marsden
PRS Hollobody II w/Piezo
Larrivee D-09
Effects:
HD500
Amps:
Frenzel DP3
Line 6 DT-25 1x12
How do you like the HD500 / DT-25 combo? I'm really close to ordering the DT-25. But is the 25 loud enough to hang with a drummer? I've been agonizing over getting the DT-50 (more than enough power, but expensive and tough to lug around) or the DT-25 (little more in my price range and easy to carry anywhere).
Any input would be way appreciated.
Thx!
--Jason
Jason - I had my DT-25 in Low Volume Mode (~10 watts) and was jamming with a buddy who has a PRS 2-Channel 50 watt head and I hung with him in 10 watt mode. The thing about wattage (tube) is that 10 watts is as loud as 50 watts, but 50 watts has more head room...so to answer your question...the DT-25 is pelnty plenty loud.....
BASS
Fender Jazz Bass w/Badass II Bridge
Ibanez SR500
AMP
Peavey Mark IV series 400 Bass Head w/ Model 1810 Cabinet
Ampeg PF-350 w/PF210HE Cabinet
Hand Crafted 112 Cabinet
Line 6 Lowdown 110 Amp
EFFECTS
LINE 6 Bass PODxt LIVE w/ Mission EP1-L6 Pedal
Digitech BP200 Effects Pedal
Digitech Jam Man Solo Pedal
Guitars
Variax300 red
ESP/LTD Hybrid H-400
Baby Taylor with undersaddle
Turser Strat copy w/ SCN Noisless pickups
Amps
POD X3 Live
Fender Mustang II
Rogue Roller PA
Digitech GNX3
Korg AX3000G
I use the Variax when i play lone guitar to cover both Acoustic and Electric parts
Sometimes we have an acoustic guitarist and I can play straight electric.
Those days, i use either the ESP or the Variax and the POD X3 Live.
Still learning the GNX and the 3000G so i havent tried them at the church yet.
The start copy is still getting bugs worked out so I havent used it live yet either.
Guitars:
Alvarez Acoustic
Fender Acoustic
Fender MIM Strat (forget the year)
Amps:
Epiphone Valve Junior head
Home built cab with a 16 ohm Jensen 12 (forget the watts right now)
Effects:
POD XT Live and POD HD500
Danelectro Trans OD and OD
Danelectro Delay
I play lead at Bridgeway Church in Tampa, FL.
Axe: ESP M1000 Deluxe
Gear: HD500 (Brit P-75/4x12 Blackback/409 mic/Screamer
For the past several years I played through my XT Live using the Chem amp and Treadplate cab. Now I'm using the HD500's model of the Park amp (Brit P-75 Norm) with the 4x12 Blackback cabinet using the 409 mic. This gives a darker tone. I throw in the Screamer as well for rhythms and crank the amps gain up a bit (and add some delay) for my leads. We have a really good PA setup so the HD500 sounds great going direct. This amp/cab combo fits in the mix really well too. I guess I got off topic here a little...sorry bout that.
As an update to a revitalized thread.
I play 2-3 time a month at Cross Connection Escondido,CA
95 American Standard Strat with Warmoth neck, loaded with Seymour Duncan split rails.
MIM 70's re-issue sunburst Strat loaded with Duncan "Everything Axe" (dual coil in a single slot).
MIM 70's re-issue Telecaster Deluxe stock Fender Humbuckers.
Takamine Santa Fe acoustic
Takamine EAN40C acoustic
Taylor 312 acoustic
Homemade Telly with Washburn Tommy Iommi Pickups, and GR 33 synth access pickup.
Fender 5 string Jazz Bass.
HD500 (more user tones that I can describe. The User 1 bank is full and I am using User 2 as a "swap file" location)
Pod X3 Live back up.
Roland GR-33 Synth
Marshall 50 watt solid state combo w/ `12" Celestion Green Back. HD500 -1/4's to Marshall (personal stage monitor) with line out to board
List for this week.
Everlasting God
O This God (M Redman)
Holy (M Redman)
How Great Is Our God
God Of Wonders
I play at The Cove Church in Mooresville, NC. Here's my gear in order of what I use most to least:
Current Rig:
JTV-69
HD500
DT-50
Vox AD212 cabinet (Celestion G12 Century(aka Vox Neodogs)
Blackheart 1x12 cabinet
Fender Eric Johnson Strat
Gibson VOS '58 Goldtop Les Paul
Gibson ES-335
Variax Acoustic 700
Alternatives:
Vox AD120VTH Head
Vox AD212 Cabinet
'92 Fender SRV Strat
Rocketfire SRV #1 Strat
Kramer Pacer w/ Floyd Rose
Gibson Inspired by Joe Bonamassa Les Paul
Recording King RAJ-26 (Mahogony J-45 model)
Recording King RD-316 (Adirondack and Mahogony D-16)
Modded Tube Screamer
Keeley Modded Boss DD-3
BBE Sonic Maximizer Stomp
Boss EQ
Analogman King of Tone pedal
Ernie Ball Stereo Pan/Volume pedal
Vox Chrome Wah
p.s. Don't forward this list to my wife! LOL Just kidding.
Dave
Current Rig:
2010 Deluxe Stratocaster with custom 920D Lincoln Brewster Loaded Dimarzio 61, 58, 58 pickguard
Gretsch Stumpomatic G5135PS
OLP Axis Dimarzio Tone zone bridge, and PAF neck
Jackson DK2M JB bridge , and 58 neck
Line 6 HD500
B52 half stack 4x12 400 watt cab.
Backup:
Vox Tonelab LE..
Ibanez TBX65R 1X12 60watt
Most of the time I use the Ibanez as a monitor on stage....The Half stack is cumbersome but sounds great with the HD500..
2010 Fender Deluxe Strat
Line 6 HD500
JTV-69 (will be here Monday 3/19/12)
Crate Palamino for when we play out at festivals or other events.
Mogami Cables.
www.andersongrovemusic.com
My current rig 2012
Fender telecaster John 5 Mexican one
line 6 Pod hd500
Pedalboard case from RondoMusic.com
Marshall mg100dfx and Roland KC300(on the way)
Monster and Mogami cables
Fender lock strap (guitar was falling all the time)
Gbu everyone
Stay in the mix and in the know.
Latest offers, special deals and insider updates.