Currently Being ModeratedFeb 7, 2011 12:02 PM (in response to trorie)Re: M9 parameters glitching...
It almost sounds as if the pressure you apply to the footswitch is causing the unit to read some "jittery" movements of the pots. If you're not already in that mode, I suggest you configure your pots to the "relative" behavior, in the setup screens.
Currently Being ModeratedFeb 10, 2011 11:21 AM (in response to trorie)Re: M9 parameters glitching...
I'm still having MAJOR issues. This time I wasn't even touching the M9, just jamming away, and suddenly all of the parameters (mids, treble, bass) suddenly dropped to zero. Then, when I tried to adjust them one at a time back to where they were, one knob would change the settings of two other parameters, etc...
Line 6, I need your help! I've updated to 2.04 twice now, and I'm experiencing the same issues!
Currently Being ModeratedFeb 10, 2011 2:09 PM (in response to trorie)RE: M9 parameters glitching...
It's sounding more like an internet hardware issue at this point; if numerous firmware reinstalls hasn't changed the symptoms and you've tried setting the pot behavior to "Relative" mode, it's deeper than the software level.
The next step is to get your unit to the nearest Authorized Line 6 Service Center for a repair tech to diagnose the issue and provide you with a solution: http://line6.com/support/serviceCenters/
Currently Being ModeratedJun 11, 2011 6:35 PM (in response to tommasi)Re: RE: M9 parameters glitching...
Dude!!! I have the same issue, I thought I was the only one on earth with this issue, I just posted: http://line6.com/community/thread/65675
I am gettign very ****** off, my M13 is acting like it's alive and parameters switch, vibrate shiver, shift, mine is happenning only with the EXP peda (which I use a lot), so right now I cant use my exp pedal, and this suck. It happen on both EXP pedal 1 and 2, when I unplug it, it behave well.
I can make a full heel/toe, when I try to setup expressions, I can't go 100%, it goes randomly, it shifts, jump, etc.
Please let me know if you got an answer for this, for me is very difficult to find a Line 6 support center, I live in Lima Peru, and also lost all my M13 documents when I moved here.