Currently Being ModeratedMay 31, 2011 2:55 PM (in response to Deadpoet)RE: 4 days POD X3 ground issue when plugged USB, and master vol question
So you only experience the grounding problem when you adjust the volume knob on your guitar when its plugged into the USB port? Have you tried this with a different guitar to make sure it's the guitar that is causing this.
Try and isolate each one of the components from the issues one at a time.
-Try using without the USB.
-Try using the the USB with no guitar attached.
-Try a different guitar.
-Try a different power source.
It could be the X3, the guitar, or the computer. Try your best to figure out which one.
If it comes down to the X3, make sure that it is being powered correctly, and if you are still having problems with the grounding, you make take it to a local Line 6 Service Center for assessment. To locate a Line 6 Service Center in your area please follow the link below:
Currently Being ModeratedMay 31, 2011 3:13 PM (in response to Line6Don)Re: RE: 4 days POD X3 ground issue when plugged USB, and master vol question
Hi Don, firstly thank you very much for your reply.
Secondly, i would like to inform you (and all users who will see this post) that PROBLEM SOLVED.
I figured out tha the problem was on a new instrument cable that I was using. I changed instrument cable and works fine now. No ground issue etc.
It is my fault that i didn't change it earlier, before I write the first post, but it was new and didn;t crossed my mind.
Thanx again anyways, take care.
Currently Being ModeratedJun 7, 2011 5:47 PM (in response to Deadpoet)RE: 4 days POD X3 ground issue when plugged USB, and master vol question
I'm glad that the problem is resolved.