Skip navigation
Up to Discussions in POD X3
837 Views 3 Replies Latest reply: Jun 7, 2011 5:47 PM by Line6Hugo RSS
Deadpoet Just Startin'
Deadpoet
4 posts since
Sep 5, 2007
Currently Being Moderated

May 26, 2011 5:50 AM

4 days POD X3 ground issue when plugged USB, and master vol question

Hi there! I recently purchased a Pod X3, and i have a serious ground issue, but ONLY when the volume switch on my guitars, are off (no sound). I just realised that this happens only when the usb cable is plugged. Can you help me? (i tried all the usb ins on my pc AND laptop, with 3 different usb cables, and the problem still exists...)

 

Also i noticed that the master volume knob, starts working after the 9 o clock indent. Is that ok?

Tags: pod, usb, x3, problem, recording, ground, bean, pod_x3_live, pod_x3
  • Line6Don Line 6 Support
    Line6Don
    5,274 posts since
    Mar 14, 2011
    Currently Being Moderated
    May 31, 2011 2:55 PM (in response to Deadpoet)
    RE: 4 days POD X3 ground issue when plugged USB, and master vol question

    Hey Deadpoet,

       

      So you only experience the grounding problem when you adjust the volume knob on your guitar when its plugged into the USB port? Have you tried this with a different guitar to make sure it's the guitar that is causing this.

       

      Try and isolate each one of the components from the issues one at a time.

       

      -Try using without the USB.

      -Try using the the USB with no guitar attached.

      -Try a different guitar.

      -Try a different power source.

       

      It could be the X3, the guitar, or the computer. Try your best to figure out which one.

       

      If it comes down to the X3, make sure that it is being powered correctly, and if you are still having problems with the grounding, you make take it to a local Line 6 Service Center for assessment. To locate a Line 6 Service Center in your area please follow the link below:

       

      http://line6.com/service_centers/

    • Deadpoet Just Startin'
      Deadpoet
      4 posts since
      Sep 5, 2007
      Currently Being Moderated
      May 31, 2011 3:13 PM (in response to Line6Don)
      Re: RE: 4 days POD X3 ground issue when plugged USB, and master vol question

      Hi Don, firstly thank you very much for your reply.

       

      Secondly, i would like to inform you (and all users who will see this post) that PROBLEM SOLVED.

      I figured out tha the problem was on a new instrument cable that I was using. I changed instrument cable and works fine now. No ground issue etc.

      It is my fault that i didn't change it earlier, before I write the first post, but it was new and didn;t crossed my mind.

       

      Thanx again anyways, take care.

       

      Alexi Ch.

  • Line6Hugo Line 6
    Line6Hugo
    6,580 posts since
    Apr 8, 2007
    Currently Being Moderated
    Jun 7, 2011 5:47 PM (in response to Deadpoet)
    RE: 4 days POD X3 ground issue when plugged USB, and master vol question

    I'm glad that the problem is resolved.

       

      Regards,

       

      Line6Hugo

More Like This

  • Retrieving data ...

Bookmarked By (0)

Legend

  • Correct Answers - 5 points
  • Helpful Answers - 3 points