Currently Being ModeratedSep 28, 2011 1:11 PM (in response to msuscorpio)Re: X3 Live stuttering audio with latest drivers 188.8.131.52
try getting slim drivers for free and it will update drivers that aren't obvious... such as motherboard and chipset drivers....
other drivers like ASIO4ALL are designed to get around the real ASIO specifications... so they are not a fair comparison... or worth using if the quality of your work matters to you....
Currently Being ModeratedSep 29, 2011 5:12 AM (in response to TheRealZap)Re: X3 Live stuttering audio with latest drivers 184.108.40.206
Ok, I tried the slim drivers software and updated everything it said was out of date including a USB chipset driver, but audio is still stuttering when using the Pod. I really dont want to reinstall a fresh copy of windows because that would mean reinstalling a lot of software, but I'm thinking it's getting to be my only option.
Currently Being ModeratedOct 4, 2011 1:41 PM (in response to msuscorpio)RE: X3 Live stuttering audio with latest drivers 220.127.116.11
Please remove any additional unnecessary USB and firmware devices from your computer when troubleshooting this issue.
To uninstall the drivers I would suggest that you use the Line 6 Uninstaller located at:
C:\Program Files(x86)\Line6\Tools (Windows 7 location)
Make sure to disconnect your Line 6 hardware from the computers USB port before you launch in the uninstaller. Launch the uninstaller and select only the Line 6 Drivers from the check-able boxes. Proceed to uninstall the drivers and restart the computer once it has completed.
Upon restart, keep your Line 6 hardware disconnected, and proceed to download and install the latest Line 6 Windows Drivers from the link below:
Windows Drivers 18.104.22.168:
Towards the end of the installation, you will prompted to reconnect your Line 6 hardware, make sure that it is turned on before you connect it when prompted. Make sure to connect it directly to a USB port and not a USB hub, extension, or keyboard of any kind, preferably connect it to a USB port on the rear of computer. Upon completion of the Line 6 Driver installer, Windows should display a message by your system clock indicating that it has detected your Line 6 hardware, click on the message to proceed to install the Windows drivers. Make sure to follow through with the Windows driver installation and click continue anyway to the message that will appear. Once this finishes, look for Windows to display another message by your system clock that your Hardware has been installed successfully.
I would also suggest to try testing it using additional USB cables and every USB port available.
If you still are receiving poor results with the latest drivers, you may follow the uninstall procedure outline above one more time, and instead of installing the latest version of our drivers, you can try an older version of them from our downloads page at the link below: