Currently Being ModeratedNov 20, 2011 5:35 AM (in response to LeperMessiah0)Re: Spider IV connection problem with FBV
Did Monkey recognize your amp plugged into it before?
Check the CAT5 jacks on the pedal and amp for bent pins, also try another cable.
Did you try a factory reset of the amp (hold the 'A' button in while turning the power on and hold it for 5-8 seconds)?
Currently Being ModeratedNov 22, 2011 9:23 AM (in response to LeperMessiah0)RE: Spider IV connection problem with FBV
+1, the first thing I would try is a different Cat 5 Cable.
If that does not work try a reset on the amp.
If you are still have issues then I would recommend taking both units to a service center to get checked out:
Line 6 Customer Support
Currently Being ModeratedNov 28, 2011 1:50 PM (in response to LeperMessiah0)RE: Spider IV connection problem with FBV
This thread is being closed due to lack of response within 72 hours. If you still have questions or are still experiencing an issue please start a new thread and mark the discussion as a question. To do so you can follow the link below and Ask a Question:
For more information about using the Online Technical Support System please review our FAQ at the link below: