Currently Being ModeratedDec 10, 2011 7:01 AM (in response to e1gh188)Re: Vetta II blank screen after flash update
It's a pain in the ***, but it's almost certainly your midi interface. You're pretty much stuck using the M Audio Midisport Uno. It's something about the data rate of the interface that makes the UNO about the only one that works for this.
Buy or borrow an UNO, DO NOT use the drivers that come with it, or the ones that Windows wants to install automatically. Go to the M Audio website and download the latest drivers and use them.
Use monkey to do the software update. It should work the first time, but don't be surprised if you have to do it a couple of times to get it right. Get very familiar with the proceedure before you start, and check out all the threads in this forum about update problems.
There are TONS of threads about the proceedure on this forum, so I won't repeat all that here.
Please post results - there are lots of people here that can give you additional help and advice if your problem continues, but they seem to check this forum less and less as time passes.
Currently Being ModeratedDec 12, 2011 11:04 AM (in response to e1gh188)Re: Vetta II blank screen after flash update
+1 to jvblack,
I would try reflashing the Vetta II with a M-Audio MIDI sport UNO since it is proven to work. Does the Roland interface come with it's own driver set or is it a plug n play device? If you try to reflash several times and the Vetta is still not operational then you need to take it to an authorized service center for repair:
Line 6 Customer Support
Currently Being ModeratedMay 30, 2012 5:11 PM (in response to e1gh188)Re: Vetta II blank screen after flash update
Thanks for the replys. I worked out what I was getting wrong. When using monkey to install It asked me which midi in and out drivers I wanted to use for the update. I was using the microsoft default for midi in and UM-ONE for the out. I changed the in to UM-ONE and re-flashed. This worked.