Currently Being ModeratedDec 29, 2011 11:51 PM (in response to samclarke666)Re: Pod X3 Pro + Pod Farm
Generally you can't use POD Farm with POD X3 in standalone mode.
What I would do - try to lower volume on POD X3 pro of your patch and use POD Farm sound. This should work i think.
Currently Being ModeratedJan 4, 2012 5:37 PM (in response to samclarke666)Re: Pod X3 Pro + Pod Farm
Actually, you can use the POD X3 as the interface in POD Farm 2.51. I'm assuming that's the version you are using.
What you need to do is first disable the hardware monitoring so that you do not hear the processing from the POD itself. This can be changed within the Line 6 Audio-MIDI devices utility in your computer's control panel. Go to the Inputs & Recording tab and turn down the POD X3 Hardware monitor level. Then, in POD Farm 2.51's preferences for hardware, select Record inputs 7/8 from the POD X3 Pro. In doing so, this will send a dry signal into POD Farm 2.51 and you will only hear the processed signal of POD Farm.
Currently Being ModeratedJan 11, 2012 5:24 PM (in response to samclarke666)RE: Pod X3 Pro + Pod Farm
Line6Hugo's answer above is correct. I have marked the answer that is correct for your question, please help out the community by marking other suggestions that were helpful to you as "Helpful Answer".
If you still have questions or are still experiencing an issue please start a new thread and mark the discussion as a question. To do so you can follow the link below and Ask a Question:
For more information about using the Online Technical Support System please review our FAQ at the link below: