Currently Being ModeratedDec 30, 2011 2:31 PM (in response to leandroguima)Re: Pod HD500 x Amp and mixer
Connect the Unbalanced L/Mono out to your guitar amp so you have stage volume. Then connect the Left side of the balanced XLR outs to the mixing console. This way you can have the signal routed through the mains and have volume on stage.
If you would like the bypass the preamp in your guitar amp you can send the L/Mono unbalanced out to the FX loop return of your amplifier.
Line 6 Customer Support
Currently Being ModeratedJan 3, 2012 9:49 AM (in response to Line6david)Re: Pod HD500 x Amp and mixer
Forgive me if I'm wrong here, but if the OP sets an output mode other than Studio/Direct for the amp input, then won't this be the same for the balanced XLR outs and potentially not sound as good when output to a PA?
Currently Being ModeratedJan 6, 2012 10:44 AM (in response to leandroguima)RE: Pod HD500 x Amp and mixer
Line6David's answer above is correct. I have marked the answer that is correct for your question, please help out the community by marking other suggestions that were helpful to you as "Helpful Answer".
If you still have questions or are still experiencing an issue please start a new thread and mark the discussion as a question. To do so you can follow the link below and Ask a Question:
For more information about using the Online Technical Support System please review our FAQ at the link below: