Currently Being ModeratedMar 1, 2012 11:21 AM (in response to jjjjjmmmmm)Re: Expression Pedal strange noises
I've noticed that sort of thing happening on a few of the reverb models. I think what you may be hearing might be a result of the pre-delay in the reverb, but I'm not completely sure. I have patch where I do what you're talking about with the Octoverb model, and I don't really notice anything odd. I haven't tried it with the Cave model, though.
Currently Being ModeratedMar 1, 2012 11:39 AM (in response to phil_m)Re: Expression Pedal strange noises
Phil- Thanks for the feedback. It seems to be happening to me on several different reverb models and I it hasn't really happened before? So I wonder what I'm doing now that is causing this to happen??
It seems like somehow a signal is getting to the reverb while the mix is at zero and it being oddly amplified as I dial in the mix via the expression pedal. Has anyone else experienced this?
In the meantime I'm looking for patches where this seems to be less prone for my set up --> heel = zero mix & toe = mix around 50%.
Currently Being ModeratedMar 5, 2012 12:26 PM (in response to jjjjjmmmmm)Re: Expression Pedal strange noises
Does anyone else have this issue or know of a potential solution??
One thing that I realized I left out in my explanation is that when I move the exp pedal from heel to toe I don't have to be playing anything on the guitar and the reverb makes this weird noise that phil was calling pre-delay. Why would changing the mix knob (via exp pedal) on a reverb while I'm not playing make a noise at all?
Thanks to anyone who posts up their thoughts/suggestions/feedback!
Currently Being ModeratedMar 28, 2012 4:45 PM (in response to jjjjjmmmmm)Re: Expression Pedal strange noises
One thing to check: if you enter the "Setup" mode (pressing both FX1 + FX2 switches), then push down on the "Model Select" knob a few times until the screen is in the "Prefs" options.
Is the lower-center parameter set to: REL POTS or ABS POTS?
More importantly, if you test by switching between the two states and then go to the Reverb effect and do your expression pedal sweep, does one of the two modes provide you the sort of parameter change you're desiring?