Ok I just about have my B bender variax Tele done. I used Graphtech saddles, and Variax 600 guts. Ok, heres my prob. I wanted my tele to look stock, to do so I  removed all the pots from the circuit board, I mounted the pot in a different spot. I ran wires to the circuit board. All my pots work except for the model selector. I cannot figure out why. I even did the calibration with all the beep sequences and still nothing. I ordered another pot and still nothing. It just wants to bounce back and forth between the R-billy setting and the Custom 2 Setting. And yes I even re-flashed the it too. Nothing.... At the moment the guitar is useable for I am letting my POD HD500 select the models for me. I just cannot figure out why I cant get this to work. If you look in the pic, you can see how i ran the wires off the pot circuit board to the pots in the stock position... The middle section is where i am putting the model selector...  Please help.