-
Like (0)
-
Currently Being ModeratedOct 10, 2012 2:01 AM (in response to Darpa)Re: Can't do "Volume Swell" with POD HD500 on-board Expression Pedal... And how to use the Equilizers... Help please...
Hi Darpa, unfortunately you can't alter the response curve of the expression pedal. Frustrating eh? This is a bit of a backward step in the HD series, but hopefully it will be sorted out in a future firmware upgrade.
- Report Abuse
-
Like (0)
-
Currently Being ModeratedOct 10, 2012 9:24 AM (in response to studiox19)Re: Can't do "Volume Swell" with POD HD500 on-board Expression Pedal... And how to use the Equilizers... Help please...
yeah its frustrating... hope LINE6 thinks about this...
- Report Abuse
-
Like (0)
-
Currently Being ModeratedOct 10, 2012 2:24 AM (in response to Darpa)Re: Can't do "Volume Swell" with POD HD500 on-board Expression Pedal... And how to use the Equilizers... Help please...
This doesn't sound like a response curve thing. My first suggestion would be calibration but you have already done that. Instructions here if you need to double check what you have done.
Global Settings Reset HD500.http://line6.com/support/docs/DOC-2222
Assuming that you have done that correctly (and the the pedal goes all the way from 0 to 255 in step five) then the most likely issue is that the minimum value for the pedal assignment is set higher than 0.
The note here explains how to assign the pedal. Check step five in this guide and make sure your minimum is set to zero.
- Report Abuse
-
Like (0)
-
Currently Being ModeratedOct 10, 2012 9:26 AM (in response to jimsreynolds)Re: Can't do "Volume Swell" with POD HD500 on-board Expression Pedal... And how to use the Equilizers... Help please...
I.have already done the calibration.. I did all the steps and at last step the pedal goes all the way from 0 to 255... I've set assigned the pedal to the Amp's output volume... at minimum I set that 0 an maximum 60 (if I do 100 then it gets more loud)... its really frustrating that we can't do volume sweel as much as the previous POD's... anyway thanks for the help... :-)
- Report Abuse
-
Like (0)
-
Currently Being ModeratedOct 10, 2012 9:30 AM (in response to Darpa)Re: Can't do "Volume Swell" with POD HD500 on-board Expression Pedal... And how to use the Equilizers... Help please...
eq's:
http://foobazaar.com/podhd/toneGuide/eq#effects
the pedal sounds like the response curve issue to me:
- Report Abuse
-
Like (0)
Actions
More Like This
- Retrieving data ...
Legend
- Correct Answers - 5 points
- Helpful Answers - 3 points
-
About
-
Follow
Stay in the mix and in the know.
Subscribe
Latest offers, special deals and insider updates.