Community: Connecting an M20D and a analog Mixer to the Stagescape Speakers

Up to Discussions in StageSource Speaker Community Support

201 Views 6 Replies Latest reply: Oct 16, 2012 2:12 AM by negatiefmann

negatiefmann

19 posts since
May 14, 2008

Currently Being Moderated

Oct 12, 2012 4:07 AM

Connecting an M20D and a analog Mixer to the Stagescape Speakers

it is me again.

I connected my 2pcs L3T and my L3S via Line6 Linke to my Stagescape M20D and it works fine.

The second Band in our practice room wants to use the L3x Speakers too But they uses an analog Mixer with XLR outputs.

How can i connect this Mixer to the speakers, without uncabling my Line6Link Configuration?

What will be the best solution?

Like (0)

dboomer
1,997 posts since
Oct 13, 2008

Currently Being Moderated

Oct 12, 2012 10:35 AM (in response to negatiefmann)
Re: Connecting an M20D and a analog Mixer to the Stagescape Speakers

Just plug the appropriate analog outputs from the mixer to the analog inputs of the speakers you wish to be addressed by any particular output. You can leave both connected silmulaneously ... but remember they are both active.

Report Abuse

Like (0)
- negatiefmann
  19 posts since
  May 14, 2008
  
  Currently Being Moderated
  
  Oct 15, 2012 4:49 AM (in response to dboomer)
  Re: Connecting an M20D and a analog Mixer to the Stagescape Speakers
  
  So...there are two possibilities....
  Analog or digital.
  There is no other solution? For example:Analog output from Mixer to Subwoofer and then by Line6Link to the Tops?
  What means "they are both active"?
  
  Report Abuse
  
  Like (0)
  - dboomer
    1,997 posts since
    Oct 13, 2008
    
    Currently Being Moderated
    
    Oct 15, 2012 10:42 AM (in response to negatiefmann)
    Re: Connecting an M20D and a analog Mixer to the Stagescape Speakers
    
    That will work as well
    
    Report Abuse
    
    Like (0)
    - negatiefmann
      19 posts since
      May 14, 2008
      
      Currently Being Moderated
      
      Oct 15, 2012 12:57 PM (in response to dboomer)
      Re: Connecting an M20D and a analog Mixer to the Stagescape Speakers
      
      I tried this...
      Analog Input (xlr) into the subwoofer and zehn with One aes/ebu cable per line6link to One Top.
      It doesn't work.....
      Am i Wong?
      
      Report Abuse
      
      Like (0)
      - dboomer
        1,997 posts since
        Oct 13, 2008
        
        Currently Being Moderated
        
        Oct 15, 2012 5:36 PM (in response to negatiefmann)
        Re: Connecting an M20D and a analog Mixer to the Stagescape Speakers
        
        Should work fine. I've done it many times.
        
        Are you not hearing anything in any speaker?
        
        Report Abuse
        
        Like (0)
        
        negatiefmann
        19 posts since
        May 14, 2008
        
        Currently Being Moderated
        
        Oct 16, 2012 2:12 AM (in response to dboomer)
        Re: Connecting an M20D and a analog Mixer to the Stagescape Speakers
        
        it works....
        it was my mistake of the way of cabeling....
        but what i`m wondering about is:
        if i connect the subwoofer first (Line6Link) then to the first top (which is on the subwoofer. with Line6Link) then to the second top (with line6link) the tops get the wrong number. means the left one in the right and the right is the left....
        if the way of cabeling is: subwoofer-> top (which is not on the subwoofer)-> then from top to top which is on the subwoofer, everything is right.
        where is my mistake?
        
        Report Abuse
        
        Like (0)

Go to original post

About
- Line 6 Story
- News
- Press
- Jobs
- Support
- Contact Us
Follow

Stay in the mix and in the know.
Subscribe

Latest offers, special deals and insider updates.

Oct 12, 2012 4:07 AM

Connecting an M20D and a analog Mixer to the Stagescape Speakers

Actions

More Like This

Bookmarked By (0)

About

Follow

Subscribe