Skip navigation
Up to Discussions in POD 2.0, PODxt Family, Pocket POD, FloorPODs
182 Views 4 Replies Latest reply: Nov 19, 2012 6:40 AM by raiellojr RSS
raiellojr Just Startin'
raiellojr
19 posts since
Jan 11, 2011
Currently Being Moderated

Nov 13, 2012 8:11 PM

Connecting POD 2.0 to a Mixer

Hello,

 

New to the POD 2.0 and I am looking to connect to a mixer and was looking for any info. I'm thinking POD left output (mono) to mixer mono return and POD input to mixer FX send, but was not sure...suggestions appreciated.

 

Thanks

Tags: effects, connections, 2.0, podxt
  • toneman2121 Gear Head
    toneman2121
    1,985 posts since
    Oct 15, 2006
    Currently Being Moderated
    Nov 14, 2012 5:07 AM (in response to raiellojr)
    Re: Connecting POD 2.0 to a Mixer

    i use the fx send of my amp to drive the input of the pod. and of course the output of the pod to the return. i would make sure the send on the mixer was set to minimum before energizing and adjust for optimum output. this seems to be best for me.

  • Triryche Expert Line 6 User
    Triryche
    3,698 posts since
    Feb 20, 2007
    Currently Being Moderated
    Nov 14, 2012 11:33 AM (in response to raiellojr)
    Re: Connecting POD 2.0 to a Mixer

    A lot depends on how you plan to use it and what you are monitoring with.

    If your are monitoring in stereo and you want the best stereo sound, I personally would connect the L & R outs to a stereo channel on your mixer.
    If you put the POD in the FX send of your mixer, where are you connecting your guitar?

    • raiellojr Just Startin'
      raiellojr
      19 posts since
      Jan 11, 2011
      Currently Being Moderated
      Nov 16, 2012 9:50 AM (in response to Triryche)
      Re: Connecting POD 2.0 to a Mixer

      My current setup involves voodoo labs GCP and GCX switcher gear and the guitar starts with a volume pedal at the beginging of the chain. My AMP FX loop is dedicated to a pro G decimator. So, my goal is to keep the POD isolated from the AMP head/cabinet and switch through to a mixer with output from the PA spk. This would allow me to use all the POD functions in direct mode, through the mixer and out the PA spk. So, connections from the POD (outputs & input) to the mixer (mackie Pro fx 8) have me scratching my head a bit.

       

      I hope this helps and any new info is appreciated.

More Like This

  • Retrieving data ...

Bookmarked By (0)

Legend

  • Correct Answers - 5 points
  • Helpful Answers - 3 points