Currently Being ModeratedApr 15, 2011 10:54 AM (in response to synter)Re: finding the position of knobs in presets, like on the old Pod bean
the position of the knobs is shown on the screen with the 300/400
the bean and the 500 use dots to show you the last saved position as well as graphically showing you the current position.
i have no idea if this is like the old bean... whatever old bean you are referring to...
but this is the way it is on the HD's
Currently Being ModeratedApr 15, 2011 10:59 AM (in response to TheRealZap)Re: finding the position of knobs in presets, like on the old Pod bean
I'm talking about the bass HD400. There are no screens of any kind. Just the knobs, and no apparent way to tell where they are set within a preset.
Or is there?
Currently Being ModeratedApr 18, 2011 4:59 PM (in response to synter)RE: finding the position of knobs in presets, like on the old Pod bean
If your original POD is the 2.0 version you can use Line 6 edit to see the settings for your presets:
Line 6 edit is available here:
You will also need a MIDI to USB interface:
Line 6 Customer Support
Currently Being ModeratedApr 19, 2011 6:52 PM (in response to Line6david)Re: RE: finding the position of knobs in presets, like on the old Pod bean
What is wrong here? My question was posted in the LOWDOWN forum wasn't it? Maybe I goofed.
The question is regarding a LowDown HD400 bass head, not the guitar hd400, or the old POD 2.0.
I'll try one more time, then I give up.
If I save a preset on the Lowdown, then change a knob setting, the orange preset light blinks. Fine. But I can't find a way to get the knob back to where it was in the preset.
The old red pod bean guitar product was the same way, except I could hold down a button and when I turn the knob, two little arrows would light up somewhere showing me when I landed on the spot that was stored in the preset. So with a little effort, I could choose a preset, and set all the knobs to their preset values.
Can the lowdown do anything like this? I'm guessing no, which if true, is a major failure. What good is a preset if you can never know for sure where everything is set?
Currently Being ModeratedApr 20, 2011 4:25 PM (in response to synter)RE: finding the position of knobs in presets, like on the old Pod bean
Sorry for misunderstanding the question.
It is not possible on the LD400 to see knob positions of presets once they are saved.
Line 6 Customer Support
Currently Being ModeratedSep 17, 2012 7:06 AM (in response to Line6david)Re: RE: finding the position of knobs in presets, like on the old Pod bean
I´ve downloaded the LowDown 400 Pro Presets List with "Slot, Name, modeled after...", but is there a list or any information in what position the individual knobs are for those presets?
"For 1C Rock-It, the Amp model is Rock, the DEEP is off, the Drive is in 10 o'clock,...."
... through all the knobs and buttons?
I would like to start with the presets I like and go from there, alter them to suit my bass, style and the channel volume required to level all used channels for our PA.
If Line6 can not provide such information, has someone from this community found out and posted it anywhere on this forum?
I couldn't find it so far.
Currently Being ModeratedNov 19, 2012 11:08 AM (in response to BassWoody)Re: RE: finding the position of knobs in presets, like on the old Pod bean
I want this info as well!!!