Currently Being ModeratedNov 19, 2012 7:27 PM (in response to Shub-Niggurath)Re: Line6 Link with 2 HD Pros
L6 Link doesn't offer any communication - data or audio - from one POD to another.
I'm confused as to what exactly you mean by having the audio from both PODs going into one amp. Is it a stereo amp? What exactly are you trying to accomplish?
Currently Being ModeratedNov 19, 2012 7:40 PM (in response to phil_m)Re: Line6 Link with 2 HD Pros
That's fine, it just wasn't 100% clear from the http://uk.line6.com/l6link/ page. I was hoping I could send audio over L6 Link from one HD to another and then use the combined signal for an amp input - so the L6 link audio would be merged in with the audio from the last unit in the chain. I didn't want to send any control parameters or anything like that, just audio.
I guess you achieve the same with the fx loop
Thanks for your reply
Currently Being ModeratedNov 20, 2012 5:06 AM (in response to Shub-Niggurath)Re: Line6 Link with 2 HD Pros
Use the digital audio connections - unlike the HD500 which only has out the HDPRO can accept digital audio inputs so you can daisy chain two HDPRO or HD500 and HDPRO without leaving the digital domain. Use MIDI to get the controls linked so that both units change patches at the same time.