Currently Being ModeratedJan 7, 2013 11:18 PM (in response to seabreeze666)Re: Acoustic sounds routing
I agree with msttomservo, FX loop is IMHO best way to go. You can also have regular pickups - electric guitar going to DT25 and piezos - acoustic guitar going to FX loop at the same time using dual signal path - just use fx loop in path with acoustic guitar. With propper settings you can blend those two sounds or do nice and fast changes from eletric to acoustic sound.
Currently Being ModeratedMar 4, 2013 5:58 AM (in response to seabreeze666)Re: Acoustic sounds routing
I just ommit the amp completely on acoustic patches. Then there will be no sound routed to the DT25 even though it is connected. On electric patches I set the mixer after the amp to zero volume. That will turn off sound to the PA and only route the sound to the DT25.
I've also created a second bank of patches with the only difference that the volume is not turned down in the mixer after the amp. I use that for playing without the amp if I don't want to drag it along. Then I get all the sound through the PA using just the JTV and the HD500.
Good luck with the programming.