Skip navigation
Up to Discussions in Relay Digital Wireless
138 Views 4 Replies Latest reply: Mar 7, 2013 1:03 PM by dboomer RSS
howska Just Startin'
howska
2 posts since
Feb 16, 2013
Currently Being Moderated

Feb 16, 2013 4:17 PM

Problem with TBP12

Hi!

sorry for my bad english...

I have a problem with relay g50. I bought it about one month ago. It works without problems. So i bought next TBP12 for my second guitar, but this new transmitter does not works. When I turned my new transmitter on (old transmitter is off) , on the TBP12 lights both led diods correctly (batteries and audio signal), but reciever signals "no signal, high interference" (three red diods) - but only on channel 1 and 12 - other channels (2-11) are absolutelly "dead" (no lightning diods).

I tryed change this TBP12 in shop - they gave me a new one, but with this next new TBP12 was the same problem...

 

Can you help me?!

 

PS: sorry for my bad english...

Tags: guitar, wireless, transmitter, g50
  • dboomer Line 6 Support
    dboomer
    1,997 posts since
    Oct 13, 2008
    Currently Being Moderated
    Feb 18, 2013 2:31 PM (in response to howska)
    Re: Problem with TBP12

    You need to switch the new transmitter to "RF1" mode.  There are instructions in the "documents" page.

    • howska Just Startin'
      howska
      2 posts since
      Feb 16, 2013
      Currently Being Moderated
      Feb 19, 2013 1:28 AM (in response to dboomer)
      Re: Problem with TBP12

      Yeah - green sticker!!!

       

      Excuse me for my blindess....

    • littleroot Just Startin'
      littleroot
      1 posts since
      Feb 6, 2013
      Currently Being Moderated
      Mar 7, 2013 9:30 AM (in response to dboomer)
      Re: Problem with TBP12

      Hi, I may be crazy but when I read that document (link below) it tells us how to look up the current setting but not specifically which button sequience to push to actually switch between RF1 and RF2. Also I am not clear if I have to change anything on the V75 receiver after I make this change on the TBP12 transmitter.

       

      http://line6.com/support/docs/DOC-2645

       

      If someone has the answer please let me know. I do not have the equipment with me until tonight and I need to switch all to RF1 as soon as I get there.

       

      Thank you,

      -Bob

      • dboomer Line 6 Support
        dboomer
        1,997 posts since
        Oct 13, 2008
        Currently Being Moderated
        Mar 7, 2013 1:03 PM (in response to littleroot)
        Re: Problem with TBP12

        You are trying to make it too hard

         

        To Set The THH12 Or TBP12 Transmitters (Including Relay G50/90):

         

        1. Enter Setup mode to display the current channel
        2. While holding down the SELECT button, press and release the ON/MUTE button on the THH12 or VALUE button on the TBP12, then release the SELECT button.

         

        The receivers automatically switch over (if necessary)

More Like This

  • Retrieving data ...

Bookmarked By (0)

Legend

  • Correct Answers - 5 points
  • Helpful Answers - 3 points