Currently Being ModeratedFeb 20, 2013 2:06 AM (in response to mgdm74)Re: Pulling chassis out of DT25 1x12 combo
It's really very simple:
1. Remove the wood peice in the back (4 screws)
2. Remove the screws on the top the amp in the back corners (black screws)
3. Remove the two screws from the handle, closest to the backside
4. Now you can pull the amp from the cab
You should now be able to get to all nooks and crannies.
Currently Being ModeratedFeb 20, 2013 3:47 PM (in response to mgdm74)Re: Pulling chassis out of DT25 1x12 combo
Pulled out the chassis following tal's instructions and found a loose knob cover floating around in there - the same ones used on the top control panel. Must have got in there during construction.