Skip navigation
Up to Discussions in Vetta
41 Views 2 Replies Latest reply: Feb 26, 2013 10:56 AM by bhayesl6 RSS
bhayesl6 Just Startin'
bhayesl6
2 posts since
Feb 25, 2013
Currently Being Moderated

Feb 25, 2013 10:36 AM

Vetta 2 patch retention

Hi.

 

I recently bought a secondhand vetta 2 combo and I have two questions about the operation of the amp.

 

I've noticed that when the combo is switched back on after about 20 mins it is set to a higher bank of patches than that set before it was switched off.

 

Also, the display panel needs to be tapped lightly before illuminating.

 

Do these suggest a problem with the amp? Is it a simple matter to resolve?

 

Thanks for your help.

 

Brendan

 


Tags: vetta, patch_retention
  • DickFoster Just Startin'
    DickFoster
    98 posts since
    Jan 26, 2012
    Currently Being Moderated
    Feb 26, 2013 8:47 AM (in response to bhayesl6)
    Re: Vetta 2 patch retention

    It sounds as if it may be ready for a new battery. The display problem is probably just a loose connector. It should be easy to put it all right. Replace the battery and then wiggle and press the connector home on the display board a couple of times. 

    Yes, you'll have to take it apart so if you're not comfortable doing that, find a friend who's comfortable digging around the bowels of PCs and such to give you a hand.  You'll need a new CR2430 3V lithium battery.

  • bhayesl6 Just Startin'
    bhayesl6
    2 posts since
    Feb 25, 2013
    Currently Being Moderated
    Feb 26, 2013 10:56 AM (in response to bhayesl6)
    Re: Vetta 2 patch retention

    Thanks for that info. I'll give it a go and revert back.

More Like This

  • Retrieving data ...

Bookmarked By (0)

Legend

  • Correct Answers - 5 points
  • Helpful Answers - 3 points