Skip navigation
Up to Discussions in POD 2.0, PODxt Family, Pocket POD, FloorPODs
3443 Views 6 Replies Latest reply: Nov 24, 2012 11:09 AM by muchris RSS
wrknkm Just Startin'
wrknkm
2 posts since
Aug 19, 2009
Currently Being Moderated

Aug 22, 2009 11:38 AM

Floor Pod- error code?

I plug in the power supply to the unit and everything flashes quickly then goes out.  If I hold the dist and mod buttons and plug in the power, the display sequences a 13, 01, 00, then E0. E0 stays lit until the power is unplugged.  The power supply is not the problem, I checked the voltage and it is good.

Tags: pod, floor
  • Kneehow UberGuru
    Kneehow
    6,750 posts since
    Dec 26, 2007
    Currently Being Moderated
    Aug 25, 2009 2:28 PM (in response to wrknkm)
    Re: Floor Pod- error code?

    You were reading the firmware version; however one thing that's not clear yet is... when you simply just power on the unit and play guitar through it, does it function correctly? Is the audio quality behaving correctly?

     

    Or did your first sentence mean that powering up the unit causes LED indicators to illuminate and then the unit completely powers off and no audio is processed/passed?

  • Line6Hugo Line 6
    Line6Hugo
    6,580 posts since
    Apr 8, 2007
    Currently Being Moderated
    Aug 31, 2009 8:50 AM (in response to wrknkm)
    Re: Floor Pod- error code?

            wrknkm,

     

    You can try resetting the Floor POD by the following procedure:

     

    Hold MOD and DELAY while powering up. When “01” appears, disconnect power. Power up again.

     

    If the problem persists, you will need to take the Floor POD to an authorized service center:

     

    http://line6.com/support/serviceCenters/

     

    Regards,

     

    Line6Hugo

  • joepastori Just Startin'
    joepastori
    3 posts since
    May 23, 2010
    Currently Being Moderated
    Sep 2, 2010 11:33 AM (in response to wrknkm)
    Re: Floor Pod- error code?

    I had exactly the same problem with mine. I occasionally get error message E1 and no audio. I took mine to a service center and he recommended trashing the unit as it is cheaper to buy a new one than have it repaired.

  • pankyb1261 Just Startin'
    pankyb1261
    1 posts since
    Aug 28, 2012
    Currently Being Moderated
    Aug 28, 2012 6:00 PM (in response to wrknkm)
    Re: Floor Pod- error code?

    Anybody figured this out for real (trashing the unit is not a great answer). I have the same exact symptoms: I plug in the power supply to the unit and everything flashes quickly then goes out.  If I hold the dist and mod buttons and plug in the power, the display sequences a 13, 01, 00, then E0. E0 stays lit until the power is unplugged.  The power supply is not the problem, I checked the voltage and it is good.    I would think this has happened on other units and the Line 6 folks have an idea of what is going on....maybe it is a trash, maybe it is something simple......Thanks, Rich


  • muchris Just Startin'
    muchris
    2 posts since
    Nov 24, 2012
    Currently Being Moderated
    Nov 24, 2012 11:09 AM (in response to wrknkm)
    Re: Floor Pod- error code?

    Anyone got a solution here?

    Same problem occured after tapping to set the delay speed.

     

    Best,

More Like This

  • Retrieving data ...

Bookmarked By (0)

Legend

  • Correct Answers - 5 points
  • Helpful Answers - 3 points